[U-Boot] [PATCH 09/12 v2] Makefile: Add Kconfig option CONFIG_SPL_IMAGE to select the SPL binary

[Heiko Schocher]

Hello Stefan,

Am 26.03.2019 um 13:16 schrieb Stefan Roese:
> This patch adds the CONFIG_SPL_IMAGE option to select the SPL image that
> shall be used to generate the combined SPL + U-Boot image. The default
> value is the current value "spl/u-boot-spl.bin".
> 
> This patch also sets CONFIG_SPL_IMAGE to "spl/boot.bin" for AT91 targets
> which use SPL NAND support (boot from NAND).
> 
> Signed-off-by: Stefan Roese <sr at denx.de>
> Cc: Heiko Schocher <hs at denx.de>
> Cc: Andreas Bießmann <andreas at biessmann.org>
> Cc: Eugen Hristev <eugen.hristev at microchip.com>
> ---
> v2:
> - No change
> 
>   Kconfig  | 10 ++++++++++
>   Makefile |  4 +++-
>   2 files changed, 13 insertions(+), 1 deletion(-)

Reviewed-by: Heiko Schocher <hs at denx.de>
Tested on the taurus board:
Tested-by: Heiko Schocher <hs at denx.de>

bye,
Heiko
-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de