[U-Boot] [PATCH v2 09/22] configs: colibri_vf: disable obscure options

[Marcel Ziswiler]

On Thu, 2019-03-28 at 16:58 +0000, Igor Opaniuk wrote:
> Hi Marcel,
> 
> The actual line which does have impact is `CONFIG_DFU_MMC=y`.

Vybrid is using raw NAND and not eMMC.

> Not sure I understand the reason of adding "# ... is not set" lines
> in
> this defconfig. Could you please explain?

That just explicitly disables stuff.

> Regards,
> Igor
> 
> On Mon, Mar 25, 2019 at 6:30 PM Marcel Ziswiler <marcel at ziswiler.com>
> wrote:
> > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > 
> > Disable more obscure options to save another 26 KB

That's the short explanation.

The long one involves understanding that the Vybrid currently runs U-
Boot in its SRAM (rather than DDR) which is limited in size.

> >  in preparation of
> > the upcoming driver model migration.
> > 
> > Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > 
> > ---
> > 
> > Changes in v2: None
> > 
> >  configs/colibri_vf_defconfig | 10 +++++++++-
> >  1 file changed, 9 insertions(+), 1 deletion(-)
> > 
> > diff --git a/configs/colibri_vf_defconfig
> > b/configs/colibri_vf_defconfig
> > index 8188582ed9..706d7ca634 100644
> > --- a/configs/colibri_vf_defconfig
> > +++ b/configs/colibri_vf_defconfig
> > @@ -17,11 +17,17 @@ CONFIG_BOARD_EARLY_INIT_F=y
> >  CONFIG_HUSH_PARSER=y
> >  # CONFIG_CMDLINE_EDITING is not set
> >  # CONFIG_AUTO_COMPLETE is not set
> > +# CONFIG_SYS_LONGHELP is not set
> >  CONFIG_SYS_PROMPT="Colibri VFxx # "
> > +# CONFIG_CMD_BOOTD is not set
> > +# CONFIG_CMD_BOOTM is not set
> >  CONFIG_CMD_BOOTZ=y
> > +# CONFIG_CMD_ELF is not set
> > +# CONFIG_CMD_IMI is not set
> >  CONFIG_CMD_ASKENV=y
> >  CONFIG_CMD_MEMTEST=y
> >  CONFIG_CMD_DFU=y
> > +# CONFIG_CMD_FLASH is not set
> >  CONFIG_CMD_FUSE=y
> >  CONFIG_CMD_GPIO=y
> >  # CONFIG_CMD_LOADB is not set
> > @@ -46,10 +52,10 @@ CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
> >  CONFIG_ENV_IS_IN_NAND=y
> >  CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
> >  CONFIG_DM=y
> > -CONFIG_DFU_MMC=y
> >  CONFIG_DFU_NAND=y
> >  CONFIG_DM_GPIO=y
> >  CONFIG_VYBRID_GPIO=y
> > +# CONFIG_MMC_HW_PARTITIONING is not set
> >  CONFIG_FSL_ESDHC=y
> >  CONFIG_NAND_VF610_NFC=y
> >  CONFIG_SYS_NAND_VF610_NFC_60_ECC_BYTES=y
> > @@ -57,6 +63,8 @@ CONFIG_MTD_UBI_FASTMAP=y
> >  CONFIG_PHYLIB=y
> >  CONFIG_PHY_MICREL=y
> >  CONFIG_MII=y
> > +# CONFIG_SPL_SERIAL_PRESENT is not set
> > +# CONFIG_TPL_SERIAL_PRESENT is not set
> >  CONFIG_DM_SERIAL=y
> >  CONFIG_FSL_LPUART=y
> >  CONFIG_USB=y
> > --
> > 2.20.1
> > 
> > _______________________________________________
> > U-Boot mailing list
> > U-Boot at lists.denx.de
> > https://lists.denx.de/listinfo/u-boot