[U-Boot] [PATCH 1/3] imx8mq_evk: README: Need to copy bl31.bin to U-Boot source tree

Fabio Estevam festevam at gmail.com
Wed Mar 13 18:02:56 UTC 2019


After building ATF it is needed to copy the generated bl31.bin file to
the U-Boot source tree.

Make this step explicit in the instructions.

Signed-off-by: Fabio Estevam <festevam at gmail.com>
---
 board/freescale/imx8mq_evk/README | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/board/freescale/imx8mq_evk/README b/board/freescale/imx8mq_evk/README
index 2529f7da3d..bd5ee12722 100644
--- a/board/freescale/imx8mq_evk/README
+++ b/board/freescale/imx8mq_evk/README
@@ -9,13 +9,14 @@ Quick Start
 
 Get and Build the ARM Trusted firmware
 ====================
+Note: srctree is U-Boot source directory
 Get ATF from: https://source.codeaurora.org/external/imx/imx-atf
 branch: imx_4.14.62_1.0.0_beta
 $ make PLAT=imx8mq bl31
+$ cp build/imx8mq/release/bl31.bin $(srctree)
 
 Get the ddr and hdmi firmware
 ====================
-Note: srctree is U-Boot source directory
 $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-7.9.bin
 $ chmod +x firmware-imx-7.9.bin
 $ ./firmware-imx-7.9.bin
-- 
2.17.1



More information about the U-Boot mailing list