[U-Boot] [PATCH 3/4] mips: add missing dtb-y to arch/mips/dts/Makefile
Masahiro Yamada
yamada.masahiro at socionext.com
Thu Mar 14 05:58:35 UTC 2019
Since commit 27cb7300ffda ("Ensure device tree DTS is compiled"),
build succeeds irrespective of the correctness of Makefile.
In fact, you can compile any defconfig without adding any entry in
arch/*/dts/Makefile.
I am going to revert that commit, so device tree must be explicitly
listed in Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---
arch/mips/dts/Makefile | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile
index b94b582..665d3cc 100644
--- a/arch/mips/dts/Makefile
+++ b/arch/mips/dts/Makefile
@@ -1,5 +1,8 @@
# SPDX-License-Identifier: GPL-2.0+
+dtb-$(CONFIG_ARCH_MT7620) += \
+ gardena-smart-gateway-mt7688.dtb \
+ linkit-smart-7688.dtb
dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
dtb-$(CONFIG_TARGET_AP143) += ap143.dtb
dtb-$(CONFIG_TARGET_BOSTON) += img,boston.dtb
@@ -17,6 +20,8 @@ dtb-$(CONFIG_BOARD_NETGEAR_DGND3700V2) += netgear,dgnd3700v2.dtb
dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f at st1704.dtb
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
+dtb-$(CONFIG_SOC_BMIPS_BCM6358) += sfr,nb4-ser.dtb
+dtb-$(CONFIG_SOC_BMIPS_BCM6838) += brcm,bcm968380gerg.dtb
dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb
--
2.7.4
More information about the U-Boot
mailing list