[U-Boot] [PATCH 0/4] add drive strenght and slew rate support for SAM9X60

[Claudiu.Beznea at microchip.com]

From: Claudiu Beznea <claudiu.beznea at microchip.com>

Hi,

This series adds support for drive strength and slew rate support for
Microchip SAMX60's pin controller. For drive strenght we could have 2
values: low, high. For slew rate we could have 2 values: enable, disabled.

Thank you,
Claudiu Beznea

Claudiu Beznea (4):
  pinctrl: at91: add option to use drive strength bits
  pinctrl: at91: add drive strength support for SAM9X60
  pinctrl: at91: add compatibles for SAM9X60 pin controller
  pinctrl: at91: add slewrate support for SAM9X60

 drivers/pinctrl/pinctrl-at91.c     | 84 +++++++++++++++++++++++++++++++++++---
 include/dt-bindings/pinctrl/at91.h |  4 ++
 2 files changed, 83 insertions(+), 5 deletions(-)

-- 
2.7.4