[U-Boot] [PATCH v2 39/50] x86: samus: Update device tree for SPL
Bin Meng
bmeng.cn at gmail.com
Wed May 1 15:52:38 UTC 2019
Hi Simon,
On Fri, Apr 26, 2019 at 12:00 PM Simon Glass <sjg at chromium.org> wrote:
>
> Add tags to allow required nodes to be present in SPL / TPL. Also enable
> the sysreset driver.
>
> Signed-off-by: Simon Glass <sjg at chromium.org>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> ---
>
> Changes in v2: None
>
> arch/x86/dts/chromebook_samus.dts | 38 +++++++++++++++++++++++++++----
> 1 file changed, 34 insertions(+), 4 deletions(-)
>
> diff --git a/arch/x86/dts/chromebook_samus.dts b/arch/x86/dts/chromebook_samus.dts
> index 35211ed81b1..6664c3b7d36 100644
> --- a/arch/x86/dts/chromebook_samus.dts
> +++ b/arch/x86/dts/chromebook_samus.dts
> @@ -17,6 +17,7 @@
> spi0 = &spi;
> usb0 = &usb_0;
> usb1 = &usb_1;
> + cros-ec0 = &cros_ec;
> };
>
> config {
> @@ -73,6 +74,7 @@
>
> /* Put this first: it is the default */
> gpio_unused: gpio-unused {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_INPUT>;
> owner = <OWNER_GPIO>;
> @@ -80,6 +82,7 @@
> };
>
> gpio_acpi_sci: acpi-sci {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_INPUT>;
> invert;
> @@ -87,6 +90,7 @@
> };
>
> gpio_acpi_smi: acpi-smi {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_INPUT>;
> invert;
> @@ -94,12 +98,14 @@
> };
>
> gpio_input: gpio-input {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_INPUT>;
> owner = <OWNER_GPIO>;
> };
>
> gpio_input_invert: gpio-input-invert {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_INPUT>;
> owner = <OWNER_GPIO>;
> @@ -107,9 +113,11 @@
> };
>
> gpio_native: gpio-native {
> + u-boot,dm-pre-reloc;
> };
>
> gpio_out_high: gpio-out-high {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_OUTPUT>;
> output-value = <1>;
> @@ -118,6 +126,7 @@
> };
>
> gpio_out_low: gpio-out-low {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_OUTPUT>;
> output-value = <0>;
> @@ -126,6 +135,7 @@
> };
>
> gpio_pirq: gpio-pirq {
> + u-boot,dm-pre-reloc;
> mode-gpio;
> direction = <PIN_INPUT>;
> owner = <OWNER_GPIO>;
> @@ -133,6 +143,7 @@
> };
>
> soc_gpio at 0 {
> + u-boot,dm-pre-reloc;
> config =
> <0 &gpio_unused 0>, /* unused */
> <1 &gpio_unused 0>, /* unused */
> @@ -250,8 +261,10 @@
> spd {
> #address-cells = <1>;
> #size-cells = <0>;
> + u-boot,dm-pre-reloc;
> samsung_4 {
> reg = <6>;
> + u-boot,dm-pre-reloc;
> data = [91 20 f1 03 04 11 05 0b
> 03 11 01 08 0a 00 50 01
> 78 78 90 50 90 11 50 e0
> @@ -291,6 +304,7 @@
> * columns 10, density 4096 mb, x32
> */
> reg = <8>;
> + u-boot,dm-pre-reloc;
> data = [91 20 f1 03 04 11 05 0b
> 03 11 01 08 0a 00 50 01
> 78 78 90 50 90 11 50 e0
> @@ -326,6 +340,7 @@
> };
> samsung_8 {
> reg = <10>;
> + u-boot,dm-pre-reloc;
> data = [91 20 f1 03 04 12 05 0a
> 03 11 01 08 0a 00 50 01
> 78 78 90 50 90 11 50 e0
> @@ -365,6 +380,7 @@
> * columns 11, density 4096 mb, x16
> */
> reg = <12>;
> + u-boot,dm-pre-reloc;
> data = [91 20 f1 03 04 12 05 0a
> 03 11 01 08 0a 00 50 01
> 78 78 90 50 90 11 50 e0
> @@ -404,6 +420,7 @@
> * columns 11, density 8192 mb, x16
> */
> reg = <13>;
> + u-boot,dm-pre-reloc;
> data = [91 20 f1 03 05 1a 05 0a
> 03 11 01 08 0a 00 50 01
> 78 78 90 50 90 11 50 e0
> @@ -443,6 +460,7 @@
> * columns 11, density 8192 mb, x16
> */
> reg = <15>;
> + u-boot,dm-pre-reloc;
> data = [91 20 f1 03 05 1a 05 0a
> 03 11 01 08 0a 00 50 01
> 78 78 90 50 90 11 50 e0
> @@ -540,7 +558,7 @@
> compatible = "ehci-pci";
> };
>
> - pch at 1f,0 {
> + pch: pch at 1f,0 {
> reg = <0x0000f800 0 0 0 0>;
> compatible = "intel,broadwell-pch";
> u-boot,dm-pre-reloc;
> @@ -559,17 +577,20 @@
> power-enable-gpio = <&gpio_a 23 0>;
>
> spi: spi {
> + u-boot,dm-pre-reloc;
> #address-cells = <1>;
> #size-cells = <0>;
> compatible = "intel,ich9-spi";
> spi-flash at 0 {
> + u-boot,dm-pre-reloc;
> #size-cells = <1>;
> #address-cells = <1>;
> reg = <0>;
> compatible = "winbond,w25q64",
> "jedec,spi-nor";
> - memory-map = <0xff800000 0x00800000>;
> + memory-map = <0 0xff800000 0 0x00800000>;
> rw-mrc-cache {
> + u-boot,dm-pre-reloc;
> label = "rw-mrc-cache";
> reg = <0x003e0000 0x00010000>;
> };
> @@ -609,7 +630,8 @@
> #size-cells = <0>;
> u-boot,dm-pre-reloc;
> intel,gen-dec = <0x800 0xfc 0x900 0xfc>;
> - cros-ec at 200 {
> + cros_ec: cros-ec {
> + u-boot,dm-pre-reloc;
> compatible = "google,cros-ec-lpc";
> reg = <0x204 1 0x200 1 0x880 0x80>;
>
> @@ -630,7 +652,7 @@
> sata at 1f,2 {
> compatible = "intel,wildcatpoint-ahci";
> reg = <0x0000fa00 0 0 0 0>;
> - u-boot,dm-pre-reloc;
> + u-boot,dm-pre-proper;
> intel,sata-mode = "ahci";
> intel,sata-port-map = <1>;
> intel,sata-port0-gen3-tx = <0x72>;
> @@ -644,13 +666,21 @@
> };
> };
>
> + pch-reset {
> + compatible = "intel,pch-reset";
> + intel,pch = <&pch>;
> + };
I think you forgot to remove this node in v2.
[snip]
Regards,
Bin
More information about the U-Boot
mailing list