May 2019 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Wed May 1 00:56:30 UTC 2019
Ending: Fri May 31 21:34:28 UTC 2019
Messages: 3916

• [U-Boot] [PATCH 09/12] sh: mpr2: Remove the board   Jonas Mark (BT-FIR/ENG1)
• [U-Boot] RSA in U-Boot   AKASHI, Takahiro
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Faiz Abbas
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Faiz Abbas
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Faiz Abbas
• [U-Boot] [PATCH v4 00/15] Add Support for eMMC in AM65x-evm   Faiz Abbas
• [U-Boot] [PATCH v4 01/15] arm64: dts: k3: Sync sdhci0 node from kernel and change driver name   Faiz Abbas
• [U-Boot] [PATCH v4 02/15] mmc: am654_sdhci: Remove quirks   Faiz Abbas
• [U-Boot] [PATCH v4 03/15] regmap: Add API regmap_init_mem_index()   Faiz Abbas
• [U-Boot] [PATCH v4 04/15] mmc: sdhci: Add support for sdhci-caps-mask   Faiz Abbas
• [U-Boot] [PATCH v4 05/15] mmc: sdhci: Make sdhci_set_clock() non static   Faiz Abbas
• [U-Boot] [PATCH v4 06/15] arm: dts: k3: Add phy specific properties to SD card node   Faiz Abbas
• [U-Boot] [PATCH v4 07/15] mmc: sdhci: Make set_ios_post() return int   Faiz Abbas
• [U-Boot] [PATCH v4 08/15] mmc: am654_sdhci: Add Support for PHY   Faiz Abbas
• [U-Boot] [PATCH v4 09/15] configs: am65x_evm: Enable CONFIG_REGMAP   Faiz Abbas
• [U-Boot] [PATCH v4 10/15] mmc: am654_sdhci: Use f_max in mmc_config   Faiz Abbas
• [U-Boot] [PATCH v4 11/15] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings   Faiz Abbas
• [U-Boot] [PATCH v4 12/15] mmc: am654_sdhci: Add a platform specific set_control_reg() callback   Faiz Abbas
• [U-Boot] [PATCH v4 13/15] configs: am65x: Add configs to support environment in eMMC   Faiz Abbas
• [U-Boot] [PATCH v4 14/15] am65x_evm: Add Support for creating a filesystem GPT partition in eMMC   Faiz Abbas
• [U-Boot] [PATCH v4 15/15] configs: am65x_evm_a53: Add Support for creating GPT partitions   Faiz Abbas
• [U-Boot] [PATCH v5 00/15] Add Support for eMMC in Am65x-evm   Faiz Abbas
• [U-Boot] [PATCH v5 01/15] arm64: dts: k3: Sync sdhci0 node from kernel and change driver name   Faiz Abbas
• [U-Boot] [PATCH v5 02/15] mmc: am654_sdhci: Remove quirks   Faiz Abbas
• [U-Boot] [PATCH v5 03/15] regmap: Add API regmap_init_mem_index()   Faiz Abbas
• [U-Boot] [PATCH v5 04/15] mmc: sdhci: Add support for sdhci-caps-mask   Faiz Abbas
• [U-Boot] [PATCH v5 05/15] mmc: sdhci: Make sdhci_set_clock() non static   Faiz Abbas
• [U-Boot] [PATCH v5 06/15] arm: dts: k3: Add phy specific properties to SD card node   Faiz Abbas
• [U-Boot] [PATCH v5 07/15] mmc: sdhci: Make set_ios_post() return int   Faiz Abbas
• [U-Boot] [PATCH v5 08/15] mmc: am654_sdhci: Add Support for PHY   Faiz Abbas
• [U-Boot] [PATCH v5 09/15] configs: am65x_evm: Enable CONFIG_REGMAP   Faiz Abbas
• [U-Boot] [PATCH v5 10/15] mmc: am654_sdhci: Use f_max in mmc_config   Faiz Abbas
• [U-Boot] [PATCH v5 11/15] mmc: sdhci: Add support for HOST_CONTROL2 and setting UHS timings   Faiz Abbas
• [U-Boot] [PATCH v5 12/15] mmc: am654_sdhci: Add a platform specific set_control_reg() callback   Faiz Abbas
• [U-Boot] [PATCH v5 13/15] configs: am65x: Add configs to support environment in eMMC   Faiz Abbas
• [U-Boot] [PATCH v5 14/15] am65x_evm: Add Support for creating a filesystem GPT partition in eMMC   Faiz Abbas
• [U-Boot] [PATCH v5 15/15] configs: am65x_evm_a53: Add Support for creating GPT partitions   Faiz Abbas
• [U-Boot] [PATCH v4 06/15] arm: dts: k3: Add phy specific properties to SD card node   Faiz Abbas
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   David Abdurachmanov
• [U-Boot] [PATCH 1/1] configs:ls1046afrwy: Add tfa secure boot defonfig.   Udit Agarwal
• [U-Boot] [PATCH v2] configs: ls1046afrwy: Add tfa secure boot defonfig.   Udit Agarwal
• [U-Boot] [PATCH v1] drivers: net: mc: Report extra memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH v2] cover letter for drivers: net: mc: Report extra memory to linux   Meenakshi Aggarwal
• [U-Boot] [PATCH v2] drivers: net: mc: Report extra memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH] armv8/fsl-layerscape: increase timeout for l3 flush   Meenakshi Aggarwal
• [U-Boot] [PATCH v3] drivers: net: mc: Report extra memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH v2] armv8/fsl-layerscape : Add loop to check cache status   Meenakshi Aggarwal
• [U-Boot] [PATCH v4] drivers: net: mc: Report extra memory to Linux   Meenakshi Aggarwal
• [U-Boot] [PATCH v3] armv8/fsl-layerscape: Add loop to check L3 dcache status   Meenakshi Aggarwal
• [U-Boot] [RESEND PATCH] board: toradex: drop support.arm maintainer email   Stefan Agner
• [U-Boot] [PATCH 1/1] imx8: cpu: fix warning for cpu_imx_get_temp   Stefan Agner
• [U-Boot] cfb_console.c: DM_VIDEO conversion questions/suggestions   Stefan Agner
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Takahiro Akashi
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Takahiro Akashi
• [U-Boot] [PATCH 4/4] efi_loader: unload applications upon Exit()   Takahiro Akashi
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Takahiro Akashi
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Takahiro Akashi
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Takahiro Akashi
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Takahiro Akashi
• [U-Boot] [PATCH 4/4] efi_loader: unload applications upon Exit()   Takahiro Akashi
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Takahiro Akashi
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Takahiro Akashi
• [U-Boot] [PATCH v2 1/1] efi_loader: unload applications upon Exit()   Takahiro Akashi
• [U-Boot] [PATCH v2 1/1] efi_loader: unload applications upon Exit()   Takahiro Akashi
• [U-Boot] [PATCH v5 0/6] AE350 support SMP boot from flash   Andes
• [U-Boot] [PATCH v5 1/6] riscv: Introduce CONFIG_XIP to support booting from flash   Andes
• [U-Boot] [PATCH v5 2/6] riscv: configs: Support AE350 SMP booting from flash flow   Andes
• [U-Boot] [PATCH v5 3/6] riscv: prior_stage_fdt_address should only be used when OF_PRIOR_STAGE is enabled   Andes
• [U-Boot] [PATCH v5 4/6] riscv: configs: AE350 will use CONFIG_OF_PRIOR_STAGE when boots from ram   Andes
• [U-Boot] [PATCH v5 5/6] riscv: configs: AE350 will use CONFIG_OF_SEPARATE when boots from flash   Andes
• [U-Boot] [PATCH v5 6/6] riscv: configs: add ae350_rv[32|64]_xip_defconfig to MAINTAINERS   Andes
• [U-Boot] [PATCH 0/6] Support Andes RISC-V l2cache on AE350 platform   Andes
• [U-Boot] [PATCH 1/6] dm: cache: add v5l2 cache controller driver   Andes
• [U-Boot] [PATCH 2/6] riscv: ae350: use the v5l2 driver to configure the cache   Andes
• [U-Boot] [PATCH 3/6] riscv: ae350: add imply v5l2 cache controller   Andes
• [U-Boot] [PATCH 4/6] riscv: cache: Flush L2 cache before jump to linux   Andes
• [U-Boot] [PATCH 5/6] riscv: dts: move out AE350 L2 node from cpus node   Andes
• [U-Boot] [PATCH 6/6] riscv: ax25: use CCTL to flush d-cache   Andes
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Ang, Chee Hong
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Ang, Chee Hong
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/3] Enable HPS execution stage notification   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/3] Enable HPS execution stage notification   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/3] Enable PSCI services for booting Linux   Ang, Chee Hong
• [U-Boot] [PATCH v1 0/3] Enable PSCI services for booting Linux   Ang, Chee Hong
• [U-Boot] RSA in U-Boot   Ilias Apalodimas
• [U-Boot] RSA in U-Boot   Ilias Apalodimas
• [U-Boot] [PATCH v2 3/3] mach-meson: g12a: add DWC2 peripheral mode support   Neil Armstrong
• [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support   Neil Armstrong
• [U-Boot] [PATCH v3 1/3] usb: dwc3: Add Meson G12A USB Glue   Neil Armstrong
• [U-Boot] [PATCH v3 2/3] phy: meson: add Amlogic G12A USB2 and USB3+PCIE PHY drivers   Neil Armstrong
• [U-Boot] [PATCH v3 3/3] mach-meson: g12a: add DWC2 peripheral mode support   Neil Armstrong
• [U-Boot] [RFC PATCH] pxe: add support for FDT overlays   Neil Armstrong
• [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support   Neil Armstrong
• [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190509   Neil Armstrong
• [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support   Neil Armstrong
• [U-Boot] [PATCH 0/3] ARM: meson-g12a: Add missing support from Linux 5.2-rc1   Neil Armstrong
• [U-Boot] [PATCH 1/3] ARM: dts: sync Amlogic G12A DT with Linux 5.2-rc1   Neil Armstrong
• [U-Boot] [PATCH 2/3] clk: meson-g12a: Add PCIE PLL support   Neil Armstrong
• [U-Boot] [PATCH 3/3] ARM: dts: Add missing DT for Meson G12A support   Neil Armstrong
• [U-Boot] [PATCH] ARM: meson-gx: Reset GXL/GXM to external PHY when not using internal PHY   Neil Armstrong
• [U-Boot] [PATCH] boards: amlogic-g200: remove phy reset   Neil Armstrong
• [U-Boot] [PATCH 3/3] ARM: dts: Add missing DT for Meson G12A support   Neil Armstrong
• [U-Boot] [PATCH] configs: u200: enable support for USB Host & Gadget   Neil Armstrong
• [U-Boot] [RFC PATCH] pxe: add support for FDT overlays   Neil Armstrong
• [U-Boot] [PATCH] ARM: meson-gx: Reset GXL/GXM to external PHY when not using internal PHY   Neil Armstrong
• [U-Boot] [PATCH] boards: amlogic-g200: remove phy reset   Neil Armstrong
• [U-Boot] [PATCH 0/3] ARM: meson-g12a: Add missing support from Linux 5.2-rc1   Neil Armstrong
• [U-Boot] [PATCH] configs: u200: enable support for USB Host & Gadget   Neil Armstrong
• [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190531   Neil Armstrong
• [U-Boot] WaRP7 nok on master   Auer, Lukas
• [U-Boot] WaRP7 nok on master   Auer, Lukas
• [U-Boot] WaRP7 nok on master   Auer, Lukas
• [U-Boot] [PATCH] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Auer, Lukas
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Auer, Lukas
• [U-Boot] [PATCH] simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver   Auer, Lukas
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   Auer, Lukas
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   Auer, Lukas
• [U-Boot] [PATCH 1/4] clk: sifive: Add clock driver for GEMGXL MGMT   Auer, Lukas
• [U-Boot] [PATCH 2/4] dm: net: macb: Update macb_linkspd_cb() signature   Auer, Lukas
• [U-Boot] [PATCH 3/4] dm: net: macb: Implement link speed change callback   Auer, Lukas
• [U-Boot] [PATCH 4/4] sifive: fu540: Enable GEMGXL MGMT driver   Auer, Lukas
• [U-Boot] [PATCH v3] riscv: Add Microchip MPFS Icicle board support   Auer, Lukas
• [U-Boot] [PATCH v2 3/4] dm: net: macb: Implement link speed change callback   Auer, Lukas
• [U-Boot] [PATCH 1/2] riscv: qemu: Enable PCI host ECAM generic driver   Auer, Lukas
• [U-Boot] [PATCH 2/2] riscv: qemu: Enable e1000 and nvme support   Auer, Lukas
• [U-Boot] [PATCH v3] riscv: Add Microchip MPFS Icicle board support   Auer, Lukas
• [U-Boot] [PATCH v4] riscv: Add Microchip MPFS Icicle board support   Auer, Lukas
• [U-Boot] U-Boot bootefi MVPP2 Bug   Sven Auhagen
• [U-Boot] WaRP7 nok on master   Stefano Babic
• [U-Boot] ARM: omap3_logic: Enable UUID   Stefano Babic
• [U-Boot] [PATCH 7/8] twister: remove board   Stefano Babic
• [U-Boot] [PATCH 6/8] mt_ventoux: remove board   Stefano Babic
• [U-Boot] [PATCH 2/8] ea20: remove board   Stefano Babic
• [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation   Stefano Babic
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Stefano Babic
• [U-Boot] [ARMv8] kernel entry point   Pankaj Bansal
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Pankaj Bansal
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Pankaj Bansal
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Pankaj Bansal
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Pankaj Bansal
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Pankaj Bansal
• [U-Boot] [PATCH] board: fsl: lx2160a: implement board_fix_fdt   Pankaj Bansal
• [U-Boot] [PATCH] board/fsl/layerscape: Modify the aliases names   Pankaj Bansal
• [U-Boot] [PATCH 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [PATCH 2/2] pci: layerscape: Add the workaround for errata A-009460   Xiaowei Bao
• [U-Boot] [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [PATCHv2 2/2] pci: layerscape: Add the workaround for errata A-009460   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [PATCH] armv8: ls1028a: Add other serdes protocal support   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Xiaowei Bao
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Xiaowei Bao
• [U-Boot] [PATCH v2] riscv:Add Microchip MPFS Icicle board support   Padmarao Begari
• [U-Boot] [PATCH v2] riscv:Add Microchip MPFS Icicle board support   Padmarao Begari
• [U-Boot] [PATCH v3] riscv: Add Microchip MPFS Icicle board support   Padmarao Begari
• [U-Boot] [PATCH v3] riscv: Add Microchip MPFS Icicle board support   Padmarao Begari
• [U-Boot] [PATCH v4] riscv: Add Microchip MPFS Icicle board support   Padmarao Begari
• [U-Boot] [PATCH u-boot-marvell v2.1 15/15] i2c: mvtwsi: fix reading status register after interrupt   Marek Behun
• [U-Boot] [PATCH u-boot-marvell v2 14/15] arm: mvebu: turris_omnia: add RESET button handling   Marek Behun
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Marek Behun
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Marek Behun
• [U-Boot] [PATCH u-boot-marvell 0/6] More fixes for Turris Omnia   Marek Behun
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Marek Behun
• [U-Boot] [PATCH u-boot-marvell v2.1 15/15] i2c: mvtwsi: fix reading status register after interrupt   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v2 14/15] arm: mvebu: turris_omnia: add RESET button handling   Marek Behún
• [U-Boot] [PATCH] fs: btrfs: fix btrfs methods return values on failure   Marek Behún
• [U-Boot] [PATCH] cmd: pxe: add board specific PXE default path   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 00/17] Fixes for Turris Omnia   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 01/17] arm: mvebu: turris_omnia: remove redundant code   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 02/17] arm: mvebu: turris_omnia: add XHCI to defconfig   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 03/17] arm: mvebu: turris_omnia: use AHCI and SATA driver model   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 04/17] arm: mvebu: turris_omnia: remove legacy macros from board header   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 05/17] arm: mvebu: turris_omnia: move I2C dependencies to Kconfig   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 06/17] arm: mvebu: turris_omnia: add SCSI as boot target   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 07/17] arm: mvebu: turris_omnia: refactor I2C accessing code   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 08/17] arm: mvebu: turris_omnia: fix checkpatch warnings   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 09/17] arm: mvebu: turris_omnia: move ATSHA204A from defconfig to Kconfig   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 10/17] arm: mvebu: turris_omnia: refactor more code   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 11/17] arm: mvebu: turris_omnia: print board info as Turris Mox   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 12/17] arm: mvebu: turris_*: remove watchdog include   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 13/17] arm: mvebu: turris_omnia: fix regdomain env var setting   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 14/17] arm: mvebu: turris_omnia: add RESET button handling   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 15/17] i2c: mvtwsi: fix reading status register after interrupt   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 16/17] arm: mvebu: turris_omnia: add GPIO support to defconfig   Marek Behún
• [U-Boot] [PATCH u-boot-marvell v3 17/17] arm: mvebu: turris_omnia: enable defconfig options needed by vendor   Marek Behún
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 0/6] More fixes for Turris Omnia   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 1/6] arm: mvebu: turris_omnia: set default ethernet adapter   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 2/6] arm: mvebu: turris_omnia: fix adapters MAC addresses   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 3/6] arm: mvebu: turris_omnia: change environment address in SPI flash   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 4/6] arm: mvebu: turris_omnia: remove unneeded macro from board config   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 5/6] arm: mvebu: turris_omnia: prefer SCSI booting before USB   Marek Behún
• [U-Boot] [PATCH u-boot-marvell 6/6] arm: mvebu: turris_omnia: call pci_init from board init code   Marek Behún
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: fix bus enumeration if some buses have empty slots   Marek Behún
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: fix bus enumeration if some buses have empty slots   Marek Behún
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: fix bus enumeration if some buses have empty slots   Marek Behún
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: fix bus enumeration if some buses have empty slots   Marek Behún
• [U-Boot] [PATCH u-boot] pci: ensure enumeration of all devices in pci_init   Marek Behún
• [U-Boot] [PATCH u-boot] pci: ensure enumeration of all devices in pci_init   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 0/7] More fixes for Turris Omnia   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 1/7] arm: mvebu: turris_omnia: set default ethernet adapter   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 2/7] arm: mvebu: turris_omnia: fix adapters MAC addresses   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 3/7] arm: mvebu: turris_omnia: change environment address in SPI flash   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 4/7] arm: mvebu: turris_omnia: remove unneeded macro from board config   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 5/7] arm: mvebu: turris_omnia: prefer SCSI booting before USB   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 6/7] arm: mvebu: turris_omnia: call pci_init from board init code   Marek Behún
• [U-Boot] [PATCH v2 u-boot-marvell 7/7] arm: mvebu: turris_omnia: fix rescue mode bootcmd bootargs setting   Marek Behún
• [U-Boot] fit_check_sign - offline FIT verification with public certificate only   Luca Boccassi
• [U-Boot] RSA in U-Boot   Paolo Bonzini
• [U-Boot] [PATCH v2] board/BuR/brsmarc1: initial commit   Felix Brack
• [U-Boot] [PATCH v2 0/2] Fix compilation error if CONFIG_USB is disabled   Matthias Brugger
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Matthias Brugger
• [U-Boot] Raspberry Pi's MAC address locked to the first device the SD card boots on   Matthias Brugger
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   BOUGH CHEN
• [U-Boot] [PATCH 0/3] Add Avenger96 board support   Patrice CHOTARD
• [U-Boot] [PATCH 2/3] board: stm32mp1: Add Avenger96 board support   Patrice CHOTARD
• [U-Boot] [PATCH v2 1/3] arm: dts: stm32mp157: Add missing pinctrl definitions   Patrice CHOTARD
• [U-Boot] [PATCH v2 2/3] board: stm32mp1: Add Avenger96 board support   Patrice CHOTARD
• [U-Boot] [PATCH v2 3/3] arm: mach-stm32mp: Add newline to the MAC error message   Patrice CHOTARD
• [U-Boot] [PATCH 00/14] Add saveenv support for STM32MP1   Patrice CHOTARD
• [U-Boot] [PULL] u-boot-stm32 for v2019.07​ (round 3)​   Patrice CHOTARD
• [U-Boot] [PATCH 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass   Patrice CHOTARD
• [U-Boot] [BUG] dm_extended_scan_fdt()   Patrice CHOTARD
• [U-Boot] [PATCH 1/4] mailbox: introduce stm32-ipcc driver   Patrice CHOTARD
• [U-Boot] [PATCH 2/4] MAINTAINERS: Add stm32 mailbox IPPC driver   Patrice CHOTARD
• [U-Boot] [PATCH 3/4] configs: stm32mp15: enable IPCC mailbox   Patrice CHOTARD
• [U-Boot] [PATCH 4/4] ARM: dts: stm32: Add ipcc mailbox support on stm32mp1   Patrice CHOTARD
• [U-Boot] [PATCH v2 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass   Patrice CHOTARD
• [U-Boot] [PULL] u-boot-stm32 for v2019.07​ (round 4)   Patrice CHOTARD
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   J. William Campbell
• [U-Boot] [PATCH 0/3] Tidy up support for compressed fit-dtb.blob.   Vagrant Cascadian
• [U-Boot] [PATCH 1/3] Add fit-dtb.blob* to .gitignore to also exclude compressed blobs.   Vagrant Cascadian
• [U-Boot] [PATCH 2/3] Clean fit-dtb.blob* to also catch compressed blobs.   Vagrant Cascadian
• [U-Boot] [PATCH 3/3] Set time and umask on fit-dtb.blob to ensure reproducibile builds.   Vagrant Cascadian
• [U-Boot] [PATCH 1/3] Add fit-dtb.blob* to .gitignore to also exclude compressed blobs.   Vagrant Cascadian
• [U-Boot] [PATCH v2 0/3] Tidy up support for compressed fit-dtb.blob.   Vagrant Cascadian
• [U-Boot] [PATCH v2 1/3] Add fit-dtb.blob* to .gitignore.   Vagrant Cascadian
• [U-Boot] [PATCH v2 2/3] Remove fit-dtb.blob* in clean target.   Vagrant Cascadian
• [U-Boot] [PATCH v2 3/3] Set time and umask on fit-dtb.blob to ensure reproducibile builds.   Vagrant Cascadian
• [U-Boot] [PATCH] Fix spelling of available.   Vagrant Cascadian
• [U-Boot] [PATCH 4/6] ARM: imx: novena: Convert block devices to DM   Vagrant Cascadian
• [U-Boot] [PATCH 5/6] ARM: imx: novena: Enable DM USB   Vagrant Cascadian
• [U-Boot] [PATCH 6/6] ARM: imx: novena: Convert to DM VIDEO   Vagrant Cascadian
• [U-Boot] [PATCH 6/6] ARM: imx: novena: Convert to DM VIDEO   Vagrant Cascadian
• [U-Boot] [PATCH 5/6] ARM: imx: novena: Enable DM USB   Vagrant Cascadian
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Vagrant Cascadian
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Vagrant Cascadian
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Vagrant Cascadian
• [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Vagrant Cascadian
• [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Vagrant Cascadian
• [U-Boot] [PATCH v3 2/2] arm64: zynqmp: add tool to convert PMU config object .c to binary   Luca Ceresoli
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH 1/3] arm64: zynqmp: xil_io.h: declare functions as static   Luca Ceresoli
• [U-Boot] [PATCH 2/3] arm64: zynqmp: add tool to minimize psu_init_gpl.c files   Luca Ceresoli
• [U-Boot] [PATCH 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Luca Ceresoli
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH v4 0/2] arm64: zynqmp: pass a PMUFW config object   Luca Ceresoli
• [U-Boot] [PATCH v4 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH v4 2/2] arm64: zynqmp: add tool to convert PMU config object .c to binary   Luca Ceresoli
• [U-Boot] [PATCH v5 0/2] arm64: zynqmp: pass a PMUFW config object   Luca Ceresoli
• [U-Boot] [PATCH v5 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Luca Ceresoli
• [U-Boot] [PATCH v5 2/2] arm64: zynqmp: add tool to convert PMU config object .c to binary   Luca Ceresoli
• [U-Boot] [PATCH 1/3] arm64: zynqmp: xil_io.h: declare functions as static   Luca Ceresoli
• [U-Boot] [PATCH 2/3] arm64: zynqmp: add tool to minimize psu_init_gpl.c files   Luca Ceresoli
• [U-Boot] [PATCH 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Luca Ceresoli
• [U-Boot] [PATCH 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Luca Ceresoli
• [U-Boot] [PATCH v2 1/3] arm64: zynqmp: xil_io.h: declare functions as static   Luca Ceresoli
• [U-Boot] [PATCH v2 2/3] arm64: zynqmp: add tool to minimize psu_init_gpl.c files   Luca Ceresoli
• [U-Boot] [PATCH v2 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Luca Ceresoli
• [U-Boot] [PATCH v12 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
• [U-Boot] [PATCH v12 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v12 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Chee, Tien Fong
• [U-Boot] [PATCH v12 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Chee, Tien Fong
• [U-Boot] [PATCH v12 4/9] ARM: socfpga: Moving the watchdog reset to the for-loop status polling   Chee, Tien Fong
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Chee, Tien Fong
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Chee, Tien Fong
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Chee, Tien Fong
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Chee, Tien Fong
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Chee, Tien Fong
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Chee, Tien Fong
• [U-Boot] fit: Add support for printing more than one FPGA node name   Chee, Tien Fong
• [U-Boot] [RFC 05/11] arm: K3: Introduce System Firmware loader framework   Chee, Tien Fong
• [U-Boot] [RFC 09/11] armv7R: dts: k3: am654: Update for loading SYSFW from MMC   Chee, Tien Fong
• [U-Boot] [RFC 04/11] misc: fs_loader: Allow initializing blkdev using platform data   Chee, Tien Fong
• [U-Boot] [RFC 05/11] arm: K3: Introduce System Firmware loader framework   Chee, Tien Fong
• [U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset   Chee, Tien Fong
• [U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset   Chee, Tien Fong
• [U-Boot] [PATCH v5 6/6] riscv: configs: add ae350_rv[32|64]_xip_defconfig to MAINTAINERS   Rick Chen
• [U-Boot] [PATCH v5 6/6] riscv: configs: add ae350_rv[32|64]_xip_defconfig to MAINTAINERS   Rick Chen
• [U-Boot] [v5 PATCH] RISCV: image: Add booti support   Rick Chen
• [U-Boot] [PATCH 2/2] riscv: qemu-riscv.h: define CONFIG_PREBOOT (enables extlinux)   Rick Chen
• [U-Boot] [PATCH 1/2] riscv: set CONFIG_SYS_BOOTM_LEN to SZ_64M   Rick Chen
• [U-Boot] [PATCH 00/12] SPI flash STM32 MCU's fixes   Patrice Chotard
• [U-Boot] [PATCH 01/12] mach-stm32: Add MPU region for spi-nor memory mapped region   Patrice Chotard
• [U-Boot] [PATCH 02/12] ARM: dts: stm32: Fix qspi memory map size for stm32f7 boards   Patrice Chotard
• [U-Boot] [PATCH 03/12] ARM: dts: stm32: add qspi flash compatible string for stm32f769-disco   Patrice Chotard
• [U-Boot] [PATCH 04/12] ARM: dts: stm32: add qspi flash compatible string for stm32f746-eval   Patrice Chotard
• [U-Boot] [PATCH 05/12] ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f746-eval   Patrice Chotard
• [U-Boot] [PATCH 06/12] ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f746-disco   Patrice Chotard
• [U-Boot] [PATCH 07/12] ARM: dts: stm32: Remove useless spi-nor compatible string   Patrice Chotard
• [U-Boot] [PATCH 08/12] ARM: dts: stm32: Set spi-rx/tx-bus-width to 4 for stm32f769-disco   Patrice Chotard
• [U-Boot] [PATCH 09/12] ARM: dts: stm32: Add qspi support for stm32f469-disco board   Patrice Chotard
• [U-Boot] [PATCH 10/12] spi: Kconfig: Add STM32F4 support for STM32_QSPI driver   Patrice Chotard
• [U-Boot] [PATCH 11/12] configs: stm32f469-disco: Enable QSPI relative flags   Patrice Chotard
• [U-Boot] [PATCH 12/12] configs: stm32f469-disco: Disable PINCTRL_FULL flag   Patrice Chotard
• [U-Boot] [PATCH 00/14] Add saveenv support for STM32MP1   Patrice Chotard
• [U-Boot] [PATCH 01/14] Prepare v2019.07-rc1   Patrice Chotard
• [U-Boot] [PATCH 02/14] stm32mp1: activate NAND and NOR support on EV1   Patrice Chotard
• [U-Boot] [PATCH 03/14] stm32mp1: support dynamic MTDPARTS   Patrice Chotard
• [U-Boot] [PATCH 04/14] env: ext4: Allow overriding interface, device and partition   Patrice Chotard
• [U-Boot] [PATCH 05/14] board: stm32mp1: Add env_ext4_get_dev_part() and env_ext4_get_intf()   Patrice Chotard
• [U-Boot] [PATCH 06/14] env: allow ENV_IS_NOWHERE with other storage target   Patrice Chotard
• [U-Boot] [PATCH 07/14] env: enable saveenv command when one CONFIG_ENV_IS_IN is activated   Patrice Chotard
• [U-Boot] [PATCH 08/14] configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags   Patrice Chotard
• [U-Boot] [PATCH 09/14] stm32mp1: Add env_get_location()   Patrice Chotard
• [U-Boot] [PATCH 10/14] mtd: Fix get_mtdparts()   Patrice Chotard
• [U-Boot] [PATCH 11/14] stm32mp1: Move ENV_SIZE to Kconfig   Patrice Chotard
• [U-Boot] [PATCH 12/14] configs: stm32mp15: Enable ENV_IS_IN_UBI   Patrice Chotard
• [U-Boot] [PATCH 13/14] configs: stm32mp15: Enable ENV_IS_SPI_FLASH   Patrice Chotard
• [U-Boot] [PATCH 14/14] stm32mp1: Update env_get_location for NOR support   Patrice Chotard
• [U-Boot] [PATCH 00/13] Add saveenv support for STM32MP1   Patrice Chotard
• [U-Boot] [PATCH 01/13] stm32mp1: activate NAND and NOR support on EV1   Patrice Chotard
• [U-Boot] [PATCH 02/13] stm32mp1: support dynamic MTDPARTS   Patrice Chotard
• [U-Boot] [PATCH 03/13] env: ext4: Allow overriding interface, device and partition   Patrice Chotard
• [U-Boot] [PATCH 04/13] board: stm32mp1: Add env_ext4_get_dev_part() and env_ext4_get_intf()   Patrice Chotard
• [U-Boot] [PATCH 05/13] env: allow ENV_IS_NOWHERE with other storage target   Patrice Chotard
• [U-Boot] [PATCH 06/13] env: enable saveenv command when one CONFIG_ENV_IS_IN is activated   Patrice Chotard
• [U-Boot] [PATCH 07/13] configs: stm32mp15: Enable ENV_IS_IN_EXT4 and all relative flags   Patrice Chotard
• [U-Boot] [PATCH 08/13] stm32mp1: Add env_get_location()   Patrice Chotard
• [U-Boot] [PATCH 09/13] mtd: Fix get_mtdparts()   Patrice Chotard
• [U-Boot] [PATCH 10/13] stm32mp1: Move ENV_SIZE to Kconfig   Patrice Chotard
• [U-Boot] [PATCH 11/13] configs: stm32mp15: Enable ENV_IS_IN_UBI   Patrice Chotard
• [U-Boot] [PATCH 12/13] configs: stm32mp15: Enable ENV_IS_SPI_FLASH   Patrice Chotard
• [U-Boot] [PATCH 13/13] stm32mp1: Update env_get_location for NOR support   Patrice Chotard
• [U-Boot] [PATCH] dm: core: Fix dm_extended_scan_fdt()   Patrice Chotard
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Patrick DELAUNAY
• [U-Boot] [PATCH v2 1/3] arm: dts: stm32mp157: Add missing pinctrl definitions   Patrick DELAUNAY
• [U-Boot] [PATCH v2 2/3] board: stm32mp1: Add Avenger96 board support   Patrick DELAUNAY
• [U-Boot] [PATCH v2 3/3] arm: mach-stm32mp: Add newline to the MAC error message   Patrick DELAUNAY
• [U-Boot] [PATCH 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Patrick DELAUNAY
• [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Patrick DELAUNAY
• [U-Boot] [PATCH v2 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Patrick DELAUNAY
• [U-Boot] [PATCH v2 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass   Patrick DELAUNAY
• [U-Boot] [PATCH 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Patrick DELAUNAY
• [U-Boot] [PATCH v2 0/8] fdt: Allow indicating a node is for U-Boot proper only   Patrick DELAUNAY
• [U-Boot] [PATCH v2 4/8] test: py: add option to select device tree used during compilation   Patrick DELAUNAY
• [U-Boot] [PATCH v2 4/7] remoteproc: add elf file load support   Fabien DESSENNE
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Andreas Dannenberg
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Andreas Dannenberg
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Andreas Dannenberg
• [U-Boot] [PATCH 01/13] mmc: k3_arasan: Allow driver to probe without PDs specified   Andreas Dannenberg
• [U-Boot] [PATCH 02/13] spl: Allow skipping clearing BSS during relocation   Andreas Dannenberg
• [U-Boot] [PATCH 03/13] spl: Make image loader infrastructure more universal   Andreas Dannenberg
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Andreas Dannenberg
• [U-Boot] [PATCH 05/13] armV7R: K3: am654: Allow using SPL BSS pre-relocation   Andreas Dannenberg
• [U-Boot] [PATCH 06/13] armv7R: K3: am654: Use full malloc implementation in SPL   Andreas Dannenberg
• [U-Boot] [PATCH 07/13] armV7R: K3: am654: Load SYSFW binary and config from boot media   Andreas Dannenberg
• [U-Boot] [PATCH 08/13] armv7R: dts: k3: am654: Update mmc nodes for loading sysfw   Andreas Dannenberg
• [U-Boot] [PATCH 09/13] configs: am65x_evm_r5: All sysfw to be loaded via MMC   Andreas Dannenberg
• [U-Boot] [PATCH 10/13] configs: am65x_hs_evm_r5: All sysfw to be loaded via MMC   Andreas Dannenberg
• [U-Boot] [PATCH 11/13] configs: am65x_evm: Add Support for eMMC boot   Andreas Dannenberg
• [U-Boot] [PATCH 12/13] configs: am65x_hs_evm: Add Support for eMMC boot   Andreas Dannenberg
• [U-Boot] [PATCH 13/13] am65x: README: Add eMMC layout and flash instructions   Andreas Dannenberg
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Andreas Dannenberg
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Andreas Dannenberg
• [U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI   Andreas Dannenberg
• [U-Boot] [PATCH 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices   Andreas Dannenberg
• [U-Boot] [PATCH 02/18] arm: omap_i2c: Remove unwanted header file inclusion   Andreas Dannenberg
• [U-Boot] [PATCH 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi   Andreas Dannenberg
• [U-Boot] [PATCH 04/18] arm: dts: k3-am65: Add I2C nodes   Andreas Dannenberg
• [U-Boot] [PATCH 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages   Andreas Dannenberg
• [U-Boot] [PATCH 06/18] configs: am65x_evm_defconfig: Enable I2C support   Andreas Dannenberg
• [U-Boot] [PATCH 07/18] configs: am65x_hs_evm_defconfig: Enable I2C support   Andreas Dannenberg
• [U-Boot] [PATCH 08/18] arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38   Andreas Dannenberg
• [U-Boot] [PATCH 09/18] configs: am65x_evm_a53: Enable PCA953X-type GPIO driver   Andreas Dannenberg
• [U-Boot] [PATCH 10/18] configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver   Andreas Dannenberg
• [U-Boot] [PATCH 11/18] configs: am65x_evm_a53: Increase malloc pool before relocation   Andreas Dannenberg
• [U-Boot] [PATCH 12/18] configs: am65x_hs_evm_a53: Increase malloc pool before relocation   Andreas Dannenberg
• [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space   Andreas Dannenberg
• [U-Boot] [PATCH 14/18] ti: common: am6: Add support for board description EEPROM   Andreas Dannenberg
• [U-Boot] [PATCH 15/18] ti: common: am6: Add support for setting MAC addresses   Andreas Dannenberg
• [U-Boot] [PATCH 16/18] board: ti: am654: Use EEPROM-based board detection   Andreas Dannenberg
• [U-Boot] [PATCH 17/18] configs: am65x_evm: Add support for applying overlays   Andreas Dannenberg
• [U-Boot] [PATCH 18/18] configs: am65x_hs_evm: Add support for applying overlays   Andreas Dannenberg
• [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space   Andreas Dannenberg
• [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space   Andreas Dannenberg
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Andreas Dannenberg
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Andreas Dannenberg
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Andreas Dannenberg
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Andreas Dannenberg
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Andreas Dannenberg
• [U-Boot] [RFC 00/11] SYSFW Loader for TI K3 family SoCs using FS Loader   Andreas Dannenberg
• [U-Boot] [RFC 01/11] mmc: k3_arasan: Allow driver to probe without PDs specified   Andreas Dannenberg
• [U-Boot] [RFC 02/11] spl: Allow skipping clearing BSS during relocation   Andreas Dannenberg
• [U-Boot] [RFC 03/11] spl: mmc: Export function to get device index   Andreas Dannenberg
• [U-Boot] [RFC 04/11] misc: fs_loader: Allow initializing blkdev using platform data   Andreas Dannenberg
• [U-Boot] [RFC 05/11] arm: K3: Introduce System Firmware loader framework   Andreas Dannenberg
• [U-Boot] [RFC 06/11] armV7R: K3: am654: Allow using SPL BSS pre-relocation   Andreas Dannenberg
• [U-Boot] [RFC 07/11] armv7R: K3: am654: Use full malloc implementation in SPL   Andreas Dannenberg
• [U-Boot] [RFC 08/11] armV7R: K3: am654: Load SYSFW binary and config from boot media   Andreas Dannenberg
• [U-Boot] [RFC 09/11] armv7R: dts: k3: am654: Update for loading SYSFW from MMC   Andreas Dannenberg
• [U-Boot] [RFC 10/11] configs: am65x_evm_r5: All sysfw to be loaded via MMC   Andreas Dannenberg
• [U-Boot] [RFC 11/11] configs: am65x_hs_evm_r5: All sysfw to be loaded via MMC   Andreas Dannenberg
• [U-Boot] [RFC 00/11] SYSFW Loader for TI K3 family SoCs using FS Loader   Andreas Dannenberg
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Andreas Dannenberg
• [U-Boot] [PATCH v2 00/18] Add EEPROM-based board detect support for TI K3 SoCs   Andreas Dannenberg
• [U-Boot] [PATCH v2 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices   Andreas Dannenberg
• [U-Boot] [PATCH v2 02/18] arm: omap_i2c: Remove unwanted header file inclusion   Andreas Dannenberg
• [U-Boot] [PATCH v2 03/18] arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi   Andreas Dannenberg
• [U-Boot] [PATCH v2 04/18] arm: dts: k3-am65: Add I2C nodes   Andreas Dannenberg
• [U-Boot] [PATCH v2 05/18] arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages   Andreas Dannenberg
• [U-Boot] [PATCH v2 06/18] configs: am65x_evm_defconfig: Enable I2C support   Andreas Dannenberg
• [U-Boot] [PATCH v2 07/18] configs: am65x_hs_evm_defconfig: Enable I2C support   Andreas Dannenberg
• [U-Boot] [PATCH v2 08/18] arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38   Andreas Dannenberg
• [U-Boot] [PATCH v2 09/18] configs: am65x_evm_a53: Enable PCA953X-type GPIO driver   Andreas Dannenberg
• [U-Boot] [PATCH v2 10/18] configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver   Andreas Dannenberg
• [U-Boot] [PATCH v2 11/18] configs: am65x_evm_a53: Increase malloc pool before relocation   Andreas Dannenberg
• [U-Boot] [PATCH v2 12/18] configs: am65x_hs_evm_a53: Increase malloc pool before relocation   Andreas Dannenberg
• [U-Boot] [PATCH v2 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space   Andreas Dannenberg
• [U-Boot] [PATCH v2 14/18] ti: common: am6: Add support for board description EEPROM   Andreas Dannenberg
• [U-Boot] [PATCH v2 15/18] ti: common: am6: Add support for setting MAC addresses   Andreas Dannenberg
• [U-Boot] [PATCH v2 16/18] board: ti: am654: Use EEPROM-based board detection   Andreas Dannenberg
• [U-Boot] [PATCH v2 17/18] configs: am65x_evm: Add support for applying overlays   Andreas Dannenberg
• [U-Boot] [PATCH v2 18/18] configs: am65x_hs_evm: Add support for applying overlays   Andreas Dannenberg
• [U-Boot] [PATCH 00/14] arm: k3: arm64: Initial support Texas Instrument's J721E Platform   Andreas Dannenberg
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Andreas Dannenberg
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Andreas Dannenberg
• [U-Boot] [PATCH v4 06/15] arm: dts: k3: Add phy specific properties to SD card node   Andreas Dannenberg
• [U-Boot] [PATCH 07/18] configs: am65x_hs_evm_defconfig: Enable I2C support   Andrew F. Davis
• [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space   Andrew F. Davis
• [U-Boot] [PATCH] fs: fat: Fix possible double free of fatbuf   Andrew F. Davis
• [U-Boot] [PATCH] cmd/fpga.c: correct typo, capitalize "Xilinx"   Robert P. J. Day
• [U-Boot] Automated/remote flashing of R-Car3   Michael Dege
• [U-Boot] [PATCH] pmic: stpmic1: add support for SYSRESET_POWER_OFF   Patrick Delaunay
• [U-Boot] [PATCH] sysreset: syscon: add support for power off   Patrick Delaunay
• [U-Boot] [PATCH v2 0/8] fdt: Allow indicating a node is for U-Boot proper only   Patrick Delaunay
• [U-Boot] [PATCH v2 1/8] sandbox: add config for SPL boot with devicetree   Patrick Delaunay
• [U-Boot] [PATCH v2 2/8] fdt: Allow to use EMBEDDED device tree for SPL   Patrick Delaunay
• [U-Boot] [PATCH v2 3/8] sandbox: add option show_of_embedded for spl test   Patrick Delaunay
• [U-Boot] [PATCH v2 4/8] test: py: add option to select device tree used during compilation   Patrick Delaunay
• [U-Boot] [PATCH v2 5/8] test: move SPL test nodes in test device tree   Patrick Delaunay
• [U-Boot] [PATCH v2 6/8] test: check u-boot properties in SPL device tree   Patrick Delaunay
• [U-Boot] [PATCH v2 7/8] fdt: Allow indicating a node is for U-Boot proper only   Patrick Delaunay
• [U-Boot] [PATCH v2 8/8] dm: doc: add documentation for pre-reloc properties in SPL and TPL   Patrick Delaunay
• [U-Boot] [PATCH v3 0/3] fdt: Allow indicating a node is for U-Boot proper only   Patrick Delaunay
• [U-Boot] [PATCH v3 1/3] test: check u-boot properties in SPL device tree   Patrick Delaunay
• [U-Boot] [PATCH v3 2/3] fdt: Allow indicating a node is for U-Boot proper only   Patrick Delaunay
• [U-Boot] [PATCH v3 3/3] dm: doc: add documentation for pre-reloc properties in SPL and TPL   Patrick Delaunay
• [U-Boot] RSA in U-Boot   Wolfgang Denk
• [U-Boot] RSA in U-Boot   Wolfgang Denk
• [U-Boot] RSA in U-Boot   Wolfgang Denk
• [U-Boot] [PATCH 0/4] mailbox: introduce stm32-ipcc driver for stm32mp157   Fabien Dessenne
• [U-Boot] [PATCH 1/4] mailbox: introduce stm32-ipcc driver   Fabien Dessenne
• [U-Boot] [PATCH 2/4] MAINTAINERS: Add stm32 mailbox IPPC driver   Fabien Dessenne
• [U-Boot] [PATCH 3/4] configs: stm32mp15: enable IPCC mailbox   Fabien Dessenne
• [U-Boot] [PATCH 4/4] ARM: dts: stm32: Add ipcc mailbox support on stm32mp1   Fabien Dessenne
• [U-Boot] [PATCH 0/7] Add STM32 Cortex-M4 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH 1/7] fdt: Introduce fdt_translate_dma_address()   Fabien Dessenne
• [U-Boot] [PATCH 2/7] dm: core: Introduce xxx_translate_dma_address()   Fabien Dessenne
• [U-Boot] [PATCH 3/7] remoteproc: add da_to_pa ops   Fabien Dessenne
• [U-Boot] [PATCH 4/7] remoteproc: add elf file load support   Fabien Dessenne
• [U-Boot] [PATCH 5/7] remoteproc: Introduce STM32 Cortex-M4 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH 6/7] MAINTAINERS: Add stm32 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH 7/7] configs: stm32mp15: enable stm32 remoteproc   Fabien Dessenne
• [U-Boot] [PATCH v2 0/7] Add STM32 Cortex-M4 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH v2 1/7] dm: core: Introduce xxx_translate_dma_address()   Fabien Dessenne
• [U-Boot] [PATCH v2 2/7] remoteproc: fix function headers   Fabien Dessenne
• [U-Boot] [PATCH v2 3/7] remoteproc: add device_to_virt ops   Fabien Dessenne
• [U-Boot] [PATCH v2 4/7] remoteproc: add elf file load support   Fabien Dessenne
• [U-Boot] [PATCH v2 5/7] remoteproc: Introduce STM32 Cortex-M4 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH v2 6/7] MAINTAINERS: Add stm32 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH v2 7/7] configs: stm32mp15: enable stm32 remoteproc   Fabien Dessenne
• [U-Boot] [PATCH v3 0/7] Add STM32 Cortex-M4 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH v3 1/7] dm: core: Introduce xxx_translate_dma_address()   Fabien Dessenne
• [U-Boot] [PATCH v3 2/7] remoteproc: fix function headers   Fabien Dessenne
• [U-Boot] [PATCH v3 3/7] remoteproc: add device_to_virt ops   Fabien Dessenne
• [U-Boot] [PATCH v3 4/7] remoteproc: add elf file load support   Fabien Dessenne
• [U-Boot] [PATCH v3 5/7] remoteproc: Introduce STM32 Cortex-M4 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH v3 6/7] MAINTAINERS: Add stm32 remoteproc driver   Fabien Dessenne
• [U-Boot] [PATCH v3 7/7] configs: stm32mp15: enable stm32 remoteproc   Fabien Dessenne
• [U-Boot] [PATCH] Import include/android_bootloader_message.h from AOSP   Alex Deymo
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Angelo Dureghello
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Angelo Dureghello
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Wadim Egorov
• [U-Boot] [PATCH] Kconfig: fix FIT offset prompt text   Ibai Erkiaga Elorza
• [U-Boot] [PATCH] mmc: implement SDHCI card detect   Ibai Erkiaga Elorza
• [U-Boot] [PATCH] Kconfig: fix FIT offset prompt text   Ibai Erkiaga
• [U-Boot] [PATCH v2] Kconfig: fix FIT offset prompt text   Ibai Erkiaga
• [U-Boot] [PATCH] mmc: implement SDHCI card detect   Ibai Erkiaga
• [U-Boot] WaRP7 nok on master   Fabio Estevam
• [U-Boot] WaRP7 nok on master   Fabio Estevam
• [U-Boot] [PATCH] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Fabio Estevam
• [U-Boot] WaRP7 nok on master   Fabio Estevam
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Fabio Estevam
• [U-Boot] ARM: omap3_logic: Enable UUID   Fabio Estevam
• [U-Boot] [PATCH v3 1/1] colibri_imx7: migrate usb to driver model   Fabio Estevam
• [U-Boot] [PATCH v3 1/1] colibri_imx7: migrate usb to driver model   Fabio Estevam
• [U-Boot] [PATCH] imx: mkimage_fit_atf: Fix DTC warnings   Fabio Estevam
• [U-Boot] [PATCH] mx6sl: hab: Fix pu_irom_mmu_enabled address   Fabio Estevam
• [U-Boot] [PATCH] pico-imx7d: remove unused 'script' variable   Fabio Estevam
• [U-Boot] [PATCH 1/2] imx8qm_mek: Remove unneeded config options settings   Fabio Estevam
• [U-Boot] [PATCH 2/2] imx8qxp_mek: Remove unneeded config options settings   Fabio Estevam
• [U-Boot] [PATCH 1/2] imx: drop imx-regs.h   Fabio Estevam
• [U-Boot] [PATCH 2/2] imx: define ARCH_MXC for i.MX8/8M/7ULP   Fabio Estevam
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Fabio Estevam
• [U-Boot] [PATCH] MAINTAINERS: Add imx dts files to i.MX maintainers list   Fabio Estevam
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Fabio Estevam
• [U-Boot] [PATCH 1/1] opos6ul: set REFSEL and REFR fields   Fabio Estevam
• [U-Boot] [PATCH 1/2] opos6uldev: don't call enable_lcdif_clock   Fabio Estevam
• [U-Boot] [PATCH 2/2] opos6uldev: remove board_ehci_hcd_init function   Fabio Estevam
• [U-Boot] [PATCH v1 4/4] doc: Update parallel NOR flash related information in README.falcon   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] [PATCH 1/3] mx6sabresd: Do not use DM with SPL   Fabio Estevam
• [U-Boot] [PATCH 2/3] mx6sabresd: Select pinctrl driver   Fabio Estevam
• [U-Boot] [PATCH 3/3] mx6sabresd: Remove U-Boot proper mmc initialization   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] [PATCH 1/1] toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN   Fabio Estevam
• [U-Boot] [PATCH] imx8mq_evk: Staticize when appropriate   Fabio Estevam
• [U-Boot] [PATCH v1 02/10] mmc: fsl_esdhc: annotate endifs   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size   Fabio Estevam
• [U-Boot] [PATCH v2 2/3] mx6sabresd: Select pinctrl driver   Fabio Estevam
• [U-Boot] [PATCH v2 3/3] mx6sabresd: Remove U-Boot proper mmc initialization   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] [PATCH] imx: Select the pinctrl drivers when DM is used   Fabio Estevam
• [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size   Fabio Estevam
• [U-Boot] [PATCH] arm, imx, Makefile: support CONFIG_MULTI_DTB_FIT   Fabio Estevam
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Fabio Estevam
• [U-Boot] [PATCH] arm, imx, Makefile: support CONFIG_MULTI_DTB_FIT   Fabio Estevam
• [U-Boot] [PATCH v4 1/8] mx7_common: Share configs to skip low level init   Fabio Estevam
• [U-Boot] [PATCH v4 2/8] imx: mx7: Skip secure init in arch_cpu_init   Fabio Estevam
• [U-Boot] [PATCH v4 3/8] pico-imx7d: Correct uart clock root   Fabio Estevam
• [U-Boot] [PATCH v4 6/8] pico-imx7d: Add bl33 config   Fabio Estevam
• [U-Boot] [PATCH v4 8/8] pico-imx7d: enable boot without PMIC   Fabio Estevam
• [U-Boot] [PATCH v4 8/8] pico-imx7d: enable boot without PMIC   Fabio Estevam
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Fabio Estevam
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Fabio Estevam
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Fabio Estevam
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Fabio Estevam
• [U-Boot] [RFC PATCH] arm: zynqmp: Add ZynqMP minimal R5 support   Evangelista, Daniel
• [U-Boot] drivers/ddr/imx/imx8m/ddr4_init.c:11:10: fatal error:   Kyle Evans
• [U-Boot] Booting imx_4.14.98_2.0.0_ga on i.MX8QM MEK Board   Peng Fan
• [U-Boot] Booting imx_4.14.98_2.0.0_ga on i.MX8QM MEK Board   Peng Fan
• [U-Boot] Pull request for mmc sub-system for v2019.07   Peng Fan
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Peng Fan
• [U-Boot] [PATCH V2 1/4] misc: imx8: add sc_misc_get_temp   Peng Fan
• [U-Boot] [PATCH V2 2/4] thermal: add i.MX8 thermal driver   Peng Fan
• [U-Boot] [PATCH V2 3/4] imx8: cpu: get temperature when print cpu desc   Peng Fan
• [U-Boot] [PATCH V2 4/4] imx: imx8dx/qxp: enable thermal   Peng Fan
• [U-Boot] [PATCH] net: fec_mxc: not access reserved register on i.MX8   Peng Fan
• [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF   Peng Fan
• [U-Boot] Booting MX6 via Serial Download after DM conversion   Peng Fan
• [U-Boot] [PATCH 0/6] imx8: support container   Peng Fan
• [U-Boot] [PATCH 1/6] imx: mach-imx: clean up Makefile   Peng Fan
• [U-Boot] [PATCH 2/6] spl: Add function to get u-boot raw sector   Peng Fan
• [U-Boot] [PATCH 3/6] imx8: support parsing i.MX8 Container file   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH 5/6] imx: add container target   Peng Fan
• [U-Boot] [PATCH 6/6] imx8qxp_mek: switch to use container image   Peng Fan
• [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF   Peng Fan
• [U-Boot] [i.MX8MM+CCF 03/41] clk: introduce clk_dev_binded   Peng Fan
• [U-Boot] [i.MX8MM+CCF 07/41] clk: mux: add set parent support   Peng Fan
• [U-Boot] [i.MX8MM+CCF 08/41] clk: export mux/divider ops   Peng Fan
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Peng Fan
• [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag   Peng Fan
• [U-Boot] [PATCH] imx: mkimage_fit_atf: Fix DTC warnings   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [PATCH] bouncebuf: add feature to support buffer only available in DRAM   Peng Fan
• [U-Boot] [i.MX8MM+CCF 08/41] clk: export mux/divider ops   Peng Fan
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Peng Fan
• [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag   Peng Fan
• [U-Boot] [i.MX8MM+CCF 03/41] clk: introduce clk_dev_binded   Peng Fan
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [PATCH 1/2] imx8qm_mek: Remove unneeded config options settings   Peng Fan
• [U-Boot] [PATCH 2/2] imx8qxp_mek: Remove unneeded config options settings   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [PATCH 1/2] imx: drop imx-regs.h   Peng Fan
• [U-Boot] [PATCH 2/2] imx: define ARCH_MXC for i.MX8/8M/7ULP   Peng Fan
• [U-Boot] [PATCH] MAINTAINERS: Add imx dts files to i.MX maintainers list   Peng Fan
• [U-Boot] [PATCH] watchdog: ulp_wdog: Remove unused ULP watchdog driver and its references   Peng Fan
• [U-Boot] [PATCH] watchdog: ulp_wdog: Remove unused ULP watchdog driver and its references   Peng Fan
• [U-Boot] [PATCH 1/1] imx8: cpu: fix warning for cpu_imx_get_temp   Peng Fan
• [U-Boot] Support for i.MX8QM Boards with SCFW and ATF   Peng Fan
• [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT   Peng Fan
• [U-Boot] [PATCH 2/2] watchdog: imx: Add DM support   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [PATCH 0/5] i.MX7ULP EVK: update ddr script to make board boot   Peng Fan
• [U-Boot] [PATCH 1/5] mx7ulp: Fix APLL num and denom setting issue   Peng Fan
• [U-Boot] [PATCH 2/5] mx7ulp_evk: Update LPDDR3 script   Peng Fan
• [U-Boot] [PATCH 3/5] mx7ulp_evk: Change APLL and its PFD0 frequencies   Peng Fan
• [U-Boot] [PATCH 4/5] mx7ulp: Select the SCG1 APLL PFD as a system clock source   Peng Fan
• [U-Boot] [PATCH 5/5] mx7ulp_evk: Update DDR freq to 352.8Mhz for ULP B0   Peng Fan
• [U-Boot] [PATCH] drivers: core: use strcmp when find device by name   Peng Fan
• [U-Boot] [PATCH 01/15] mx7ulp: Add common plugin codes for mx7ulp   Peng Fan
• [U-Boot] [PATCH 02/15] imx: i.MX7ULP: add get_boot_device   Peng Fan
• [U-Boot] [PATCH 03/15] i.MX7ULP: evk: Modify FDT file to disable SD3.0 for usb boot   Peng Fan
• [U-Boot] [PATCH 04/15] i.MX7ULP: Fix system reset after a7 rtc alarm expired.   Peng Fan
• [U-Boot] [PATCH 05/15] i.MX7ULP: Correct the clock index   Peng Fan
• [U-Boot] [PATCH 06/15] i.MX7ULP: Fix PCC register bits mask and offset issue   Peng Fan
• [U-Boot] [PATCH 07/15] i.MX7ULP: Add CONFIG_MX7ULP to kconfig   Peng Fan
• [U-Boot] [PATCH 08/15] i.MX7ULP: Fix wrong i2c configuration name   Peng Fan
• [U-Boot] [PATCH 09/15] misc: Kconfig: make i.MX7ULP could use MXC_OCOTP   Peng Fan
• [U-Boot] [PATCH 10/15] i.MX7ULP: evk: Enable fuse comamnd   Peng Fan
• [U-Boot] [PATCH 11/15] i.MX7ULP: Fix SPLL/APLL clock rate calculation issue   Peng Fan
• [U-Boot] [PATCH 12/15] i.MX7ULP: Workaround APLL PFD2 to 345.6Mhz   Peng Fan
• [U-Boot] [PATCH 13/15] i.MX7ULP: Add CPU revision check for B0   Peng Fan
• [U-Boot] [PATCH 14/15] i.MX7ULP: Set A7 core frequency to 500Mhz for B0 chip   Peng Fan
• [U-Boot] [PATCH 15/15] i.MX7ULP: Change clock rate calculation for NIC1 BUS and EXT   Peng Fan
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Peng Fan
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Peng Fan
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Peng Fan
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Peng Fan
• [U-Boot] [PATCH v4 02/13] dm: Fix documentation entry as there is no UCLASS_CLOCK uclass   Peng Fan
• [U-Boot] [PATCH v4 03/13] clk: Remove clock ID check in .get_rate() of clk_fixed_*   Peng Fan
• [U-Boot] [PATCH v4 05/13] clk: Extend struct clk to provide clock type agnostic flags   Peng Fan
• [U-Boot] [PATCH v4 06/13] clk: Provide struct clk for fixed rate clock (clk_fixed_rate.c)   Peng Fan
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Peng Fan
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Peng Fan
• [U-Boot] [PATCH v4 08/13] dm: clk: Define clk_get_parent_rate() for clk operations   Peng Fan
• [U-Boot] [PATCH v4 09/13] dm: clk: Define clk_get_by_id() for clk operations   Peng Fan
• [U-Boot] [PATCH v4 10/13] clk: test: Provide unit test for clk_get_by_id() method   Peng Fan
• [U-Boot] [PATCH v4 13/13] dm: clk: Extend clk_get_parent_rate() to support CLK_GET_RATE_NOCACHE flag   Peng Fan
• [U-Boot] [PATCH v4 01/13] clk: doc: Add documentation entry for Common Clock Framework [CCF] (i.MX)   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [RFC] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2   Peng Fan
• [U-Boot] [PATCH] imx8mq_evk: Staticize when appropriate   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH] mmc: fsl_esdhc: fix ddr mode settings   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Peng Fan
• [U-Boot] [PATCH v3] dw_mmc: turn on the IO supply   Peng Fan
• [U-Boot] [PATCH v1 01/10] mmc: add missing space before comment delimiter   Peng Fan
• [U-Boot] [PATCH v1 02/10] mmc: fsl_esdhc: annotate endifs   Peng Fan
• [U-Boot] Pull request for mmc sub-system for v2019.07   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH V2 1/3] test: dm: adc: use the real device name   Peng Fan
• [U-Boot] [PATCH V2 2/3] test: dm: usb: use the real device name   Peng Fan
• [U-Boot] [PATCH V2 3/3] drivers: core: use strcmp when find device by name   Peng Fan
• [U-Boot] [PATCH] drivers: core: use strcmp when find device by name   Peng Fan
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [PATCH] gpio: pca953x: Add TI TCA9539 compatible string   Peng Fan
• [U-Boot] [EXT] Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file   Peng Fan
• [U-Boot] [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig   Peng Fan
• [U-Boot] [v3, 2/5] mmc: split fsl_esdhc driver for i.MX   Peng Fan
• [U-Boot] [v3, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms   Peng Fan
• [U-Boot] [v3, 4/5] mmc: fsl_esdhc: drop i.MX code   Peng Fan
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Peng Fan
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Peng Fan
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Peng Fan
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Peng Fan
• [U-Boot] [PATCH] lib: Makefile: build fdtdec_common.c when OF_LIBFDT selected   Peng Fan
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Peng Fan
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Peng Fan
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Peng Fan
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Peng Fan
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Peng Fan
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Peng Fan
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Stephen Finucane
• [U-Boot] [PATCH] dm: arm: bcmstb: Enable driver model MMC support   Thomas Fitzsimmons
• [U-Boot] [PATCH] Fix RK3328-evb Floating GPIO0_D6 - pull up - 4ma   Mister Fix-IT
• [U-Boot] [PATCH] tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLS   Fabrice Fontaine
• [U-Boot] [PATCH] Make FIT support really optional   Fabrice Fontaine
• [U-Boot] [PATCH] usb: ohci: ohci-da8xx: Cleanup Error handling and fix flags   Adam Ford
• [U-Boot] [PATCH 1/2] Convert CONFIG_NAND to Kconfig   Adam Ford
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Adam Ford
• [U-Boot] [PATCH] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Adam Ford
• [U-Boot] [PATCH] net: davinci_emac: use driver model (CONFIG_DM_ETH)   Adam Ford
• [U-Boot] [PATCH] ARM: omap3_logic/omap35_logic: Enable GPIO in SPL   Adam Ford
• [U-Boot] AM3517 SPL fails with CONFIG_DM enabled   Adam Ford
• [U-Boot] AM3517 SPL fails with CONFIG_DM enabled   Adam Ford
• [U-Boot] [PATCH] ARM: da850evm: Enable block cache during SPL   Adam Ford
• [U-Boot] [PATCH] ARM: imx6logic: Stop overwriting fdt_file if manually set   Adam Ford
• [U-Boot] [PATCH v4 12/13] clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: 5.0-rc3)   Adam Ford
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Adam Ford
• [U-Boot] [RFC] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2   Adam Ford
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Adam Ford
• [U-Boot] DM for ci_udc   Adam Ford
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Adam Ford
• [U-Boot] [PATCH 0/5] arm: remove leftover code for dm* SoCs   Adam Ford
• [U-Boot] [PATCH] davinci: spl: Create board_init_f for explicit initialization   Adam Ford
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Adam Ford
• [U-Boot] [PATCH] davinci: spl: Create board_init_f for explicit initialization   Adam Ford
• [U-Boot] [PATCH] davinci: spl: Create board_init_f for explicit initialization   Adam Ford
• [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization   Adam Ford
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Adam Ford
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Adam Ford
• [U-Boot] [PATCH 1/3] spl: imx6: Let spl_boot_device return USDHC1 or USDHC2   Adam Ford
• [U-Boot] [PATCH 2/3] ARM: imx6q_logic: Enable SPL_DM with SPL_OF_CONTROL   Adam Ford
• [U-Boot] [PATCH 3/3] ARM: imx6q_logic: With SPL_OF_CONTROL enabled, remove MMC init   Adam Ford
• [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization   Adam Ford
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Adam Ford
• [U-Boot] [PATCH v2 2/2] ARM: davinci: SPL: fix BSS initialization   Adam Ford
• [U-Boot] [PATCH] configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT   Adam Ford
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Adam Ford
• [U-Boot] [PATCH v2 2/2] ARM: davinci: SPL: fix BSS initialization   Adam Ford
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Adam Ford
• [U-Boot] [PATCH] ARM: da850evm: Fix reading MAC from SPI   Adam Ford
• [U-Boot] [PATCH] arm: omap3: Manually initialize GPIO if OF_CONTROL doesn't   Adam Ford
• [U-Boot] [PATCH V2] arm: omap3: Manually initialize GPIO if OF_CONTROL doesn't   Adam Ford
• [U-Boot] [PATCH] ARM: davinci: Remove ipam390 linker script from Kconfig   Adam Ford
• [U-Boot] omap2 lowlevel_init.S quirk / question   Adam Ford
• [U-Boot] [PATCH] davinci: spl: Create board_init_f for explicit initialization   Adam Ford
• [U-Boot] [PATCH V2] ARM: DTS: imx6q-logicpd: Resync with Linux 5.1   Adam Ford
• [U-Boot] [U-Boot,1/2] Convert CONFIG_NAND to Kconfig   Adam Ford
• [U-Boot] [PATCH] net: davinci_emac: convert to using the driver model   Adam Ford
• [U-Boot] [PATCH] net: davinci_emac: convert to using the driver model   Adam Ford
• [U-Boot] [PATCH] net: davinci_emac: convert to using the driver model   Adam Ford
• [U-Boot] [PATCH] net: davinci_emac: convert to using the driver model   Adam Ford
• [U-Boot] [PATCH v2] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v3] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v4] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v4] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v6] ARM: am335x: Add phyCORE AM335x R2 support   Niel Fourie
• [U-Boot] [PATCH v3 0/4] Add Cadence PCIe endpoint driver with new uclass   Ramon Fried
• [U-Boot] [EXT] Re: [PATCH 2/2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands   Schrempf Frieder
• [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF   Schrempf Frieder
• [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF   Schrempf Frieder
• [U-Boot] DM for ci_udc   Schrempf Frieder
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Schrempf Frieder
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Schrempf Frieder
• [U-Boot] [PATCH v2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands   Schrempf Frieder
• [U-Boot] [PATCH] arm: zimage: add other-bootloader image magic number   Christoph Fritz
• [U-Boot] [PATCH v2] arm: zimage: add barebox image magic number   Christoph Fritz
• [U-Boot] Raspberry Pi's MAC address locked to the first device the SD card boots on   Timothy Froehlich
• [U-Boot] RSA in U-Boot   Sughosh Ganu
• [U-Boot] [PATCH v2 0/5] Add spi-mem driver for MediaTek MT7629 SoC   Weijie Gao
• [U-Boot] [PATCH v2 1/5] spi: remove obsolete mtk_qspi driver   Weijie Gao
• [U-Boot] [PATCH v2 2/5] spi: add spi-mem driver for MediaTek MT7629 SoC   Weijie Gao
• [U-Boot] [PATCH v2 3/5] arm: dts: change MT7629 to use spi-mem rather than qspi   Weijie Gao
• [U-Boot] [PATCH v2 4/5] configs: mt7629_rfb: change MTK_QSPI to MTK_SNFI_SPI   Weijie Gao
• [U-Boot] [PATCH v2 5/5] MAINTAINERS: change spi driver entry   Weijie Gao
• [U-Boot] [PATCH v2 2/5] spi: add spi-mem driver for MediaTek MT7629 SoC   Weijie Gao
• [U-Boot] [PATCH v3 0/5] Add spi-mem driver for MediaTek MT7629 SoC   Weijie Gao
• [U-Boot] [PATCH v3 1/5] spi: remove obsolete mtk_qspi driver   Weijie Gao
• [U-Boot] [PATCH v3 2/5] spi: add spi-mem driver for MediaTek MT7629 SoC   Weijie Gao
• [U-Boot] [PATCH v3 3/5] arm: dts: change MT7629 to use spi-mem rather than qspi   Weijie Gao
• [U-Boot] [PATCH v3 4/5] configs: mt7629_rfb: change MTK_QSPI to MTK_SNFI_SPI   Weijie Gao
• [U-Boot] [PATCH v3 5/5] MAINTAINERS: change spi driver entry   Weijie Gao
• [U-Boot] [PATCH 1/3] board_r: move initr_serial to be called before initr_watchdog   Weijie Gao
• [U-Boot] [PATCH 2/3] watchdog: mtk_wdt: fix timeout calculation   Weijie Gao
• [U-Boot] [PATCH 3/3] arm: mediatek: remove arch_misc_init   Weijie Gao
• [U-Boot] [PATCH 1/3] board_r: move initr_serial to be called before initr_watchdog   Weijie Gao
• [U-Boot] [PATCH v2 1/3] board_r: move initr_watchdog to be called after initr_serial   Weijie Gao
• [U-Boot] [PATCH v2 2/3] watchdog: mtk_wdt: fix timeout calculation   Weijie Gao
• [U-Boot] [PATCH v2 3/3] arm: mediatek: remove arch_misc_init   Weijie Gao
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Suneel Garapati
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Ezequiel Garcia
• [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size   Ezequiel Garcia
• [U-Boot] [PATCH v2 1/3] mx6sabresd: Remove CONFIG_SPL_DM to decrease the SPL size   Ezequiel Garcia
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Ezequiel Garcia
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Ezequiel Garcia
• [U-Boot] [PATCH] wandboard: Rework Makefile to prevent spl.o from being built   Ezequiel Garcia
• [U-Boot] [PATCH 1/2] spl: Move SPL_MMC_TINY option to appear under SPL menu   Ezequiel Garcia
• [U-Boot] [PATCH 2/2] mmc: Register only the first MMC device on MMC_TINY   Ezequiel Garcia
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Ezequiel Garcia
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Ezequiel Garcia
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Ezequiel Garcia
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Ezequiel Garcia
• [U-Boot] [PATCH] armv8: fsl-layerscape: Update qspi clk cfg   Pankit Garg
• [U-Boot] [PATCH 1/2] ls1046ardb: Add CONFIG_ENV_ADDR to init env in qspi boot   Pankit Garg
• [U-Boot] [PATCH 2/2] armv8: fsl-layerscape: Change bootcmd update logic   Pankit Garg
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: Update qspi clk cfg   Pankit Garg
• [U-Boot] [PATCH 1/2] ls1046ardb: Add CONFIG_ENV_ADDR to init env in qspi boot   Pankit Garg
• [U-Boot] [PATCH 2/2] armv8: fsl-layerscape: Change bootcmd update logic   Pankit Garg
• [U-Boot] [PATCHv2 0/1] Add ps7_init_gpl.c for Z-turn board   Anton Gerasimov
• [U-Boot] [PATCHv2 1/1] Basic (PS-only) configuration based on Vivado board files by Sergiusz Bazanski <sergius at q3k.org>   Anton Gerasimov
• [U-Boot] [PATCH] arm: mvebu: helios4: Enable CONFIG_BLK and CONFIG_DM_MMC   Dennis Gilmore
• [U-Boot] [PATCH 1/2 v2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Glass
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Simon Glass
• [U-Boot] [PATCH v3 00/18] x86: Add support for booting from TPL   Simon Glass
• [U-Boot] [PATCH v3 01/18] cros_ec: Use a hyphen in the uclass name   Simon Glass
• [U-Boot] [PATCH v3 02/18] x86: Add a simple TPL implementation   Simon Glass
• [U-Boot] [PATCH v3 03/18] x86: sysreset: Separate out the EFI code   Simon Glass
• [U-Boot] [PATCH v3 04/18] x86: sysreset: Implement power-off if available   Simon Glass
• [U-Boot] [PATCH v3 05/18] x86: sysreset: Implement the get_last() method   Simon Glass
• [U-Boot] [PATCH v3 06/18] x86: Add documention on the samus flashmap   Simon Glass
• [U-Boot] [PATCH v3 07/18] x86: samus: Update device tree for SPL   Simon Glass
• [U-Boot] [PATCH v3 08/18] x86: samus: Update device tree for verified boot   Simon Glass
• [U-Boot] [PATCH v3 09/18] x86: Update device tree for TPL   Simon Glass
• [U-Boot] [PATCH v3 10/18] x86: Update device tree for Chromium OS verified boot   Simon Glass
• [U-Boot] [PATCH v3 11/18] x86: Fix device-tree indentation   Simon Glass
• [U-Boot] [PATCH v3 12/18] x86: samus: Increase the pre-reloc memory again   Simon Glass
• [U-Boot] [PATCH v3 13/18] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Simon Glass
• [U-Boot] [PATCH v3 14/18] x86: Enable the RTC on all boards   Simon Glass
• [U-Boot] [PATCH v3 15/18] x86: Update the memory map a little   Simon Glass
• [U-Boot] [PATCH v3 16/18] x86: broadwell: Update PCH to work in TPL   Simon Glass
• [U-Boot] [PATCH v3 17/18] x86: Add a way to jump from TPL to SPL   Simon Glass
• [U-Boot] [PATCH v3 18/18] x86: samus: Add a target to boot through TPL   Simon Glass
• [U-Boot] [PATCH v2 05/50] cros_ec: Use a hyphen in the uclass name   Simon Glass
• [U-Boot] [PATCH v2 49/50] x86: Add a way to jump from TPL to SPL   Simon Glass
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Simon Glass
• [U-Boot] [PATCH 00/18] autoboot: Tidy up autoboot code   Simon Glass
• [U-Boot] [PATCH 01/18] main: Use conditional run_preboot_environment_command()   Simon Glass
• [U-Boot] [PATCH 02/18] Convert CONFIG_SHOW_BOOT_PROGRESS to Kconfig   Simon Glass
• [U-Boot] [PATCH 03/18] Add CONFIG_USE_PREBOOT to boards that use CONFIG_PREBOOT   Simon Glass
• [U-Boot] [PATCH 04/18] Convert CONFIG_USE_PREBOOT and CONFIG_PREBOOT to Kconfig   Simon Glass
• [U-Boot] [PATCH 05/18] autoboot: Use CONFIG_AUTOBOOT_STOP_STR_SHA256 indirectly   Simon Glass
• [U-Boot] [PATCH 06/18] autoboot: Drop #ifdef for CONFIG_AUTOBOOT_ENCRYPTION   Simon Glass
• [U-Boot] [PATCH 07/18] autoboot: Improve docs for CONFIG_AUTOBOOT_ENCRYPTION   Simon Glass
• [U-Boot] [PATCH 08/18] autoboot: Use if() for CONFIG_SILENT_CONSOLE   Simon Glass
• [U-Boot] [PATCH 09/18] autoboot: Drop #ifdef CONFIG_AUTOBOOT_KEYED   Simon Glass
• [U-Boot] [PATCH 10/18] autoboot: Drop unused CONFIG_MENUPROMPT   Simon Glass
• [U-Boot] [PATCH 11/18] autoboot: Rename CONFIG_MENUKEY to CONFIG_AUTOBOOT_MENUKEY   Simon Glass
• [U-Boot] [PATCH 12/18] snow: Define CONFIG_AUTOBOOT_MENUKEY   Simon Glass
• [U-Boot] [PATCH 13/18] autoboot: Tidy up use of menukey   Simon Glass
• [U-Boot] [PATCH 14/18] autoboot: Rename CONFIG_MENU_SHOW to include AUTOBOOT   Simon Glass
• [U-Boot] [PATCH 15/18] Convert CONFIG_AUTOBOOT_MENU_SHOW to Kconfig   Simon Glass
• [U-Boot] [PATCH 16/18] autoboot: Add comments for menu_show()   Simon Glass
• [U-Boot] [PATCH 17/18] autoboot: Move a few more options from #ifdef to if()   Simon Glass
• [U-Boot] [PATCH 18/18] autoboot: Adjust the implementation in autoboot_command()   Simon Glass
• [U-Boot] [PATCH 4/6] dm: pci: add Freescale PowerPC PCIe driver   Simon Glass
• [U-Boot] [PATCH] ata: ahci: fix memory leak   Simon Glass
• [U-Boot] [PATCH v2 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs   Simon Glass
• [U-Boot] [PATCH 1/6] powerpc: mpc85xx: Update the condition to compile PCI routines   Simon Glass
• [U-Boot] [PATCH 2/6] powerpc: T208xQDS: Compile the legacy PCIe routines conditionally   Simon Glass
• [U-Boot] [PATCH 3/6] t2080: dts: Added PCIe DT nodes   Simon Glass
• [U-Boot] [PATCH 5/6] powerpc: T208xQDS: Disable legacy PCIe driver   Simon Glass
• [U-Boot] [PATCH 6/6] configs: T2080QDS: Enable PCIe driver   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v3 1/2] regulator: bd71837: copy the bd71837 pmic driver from NXP imx u-boot   Simon Glass
• [U-Boot] [PATCH v3 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs   Simon Glass
• [U-Boot] [PATCH 1/2] fdtdec: Use fdt_setprop_u32() for fdtdec_set_phandle()   Simon Glass
• [U-Boot] [PATCH 2/2] fdtdec: Remove fdt_{addr,size}_unpack()   Simon Glass
• [U-Boot] [PATCH] drivers: core: use strcmp when find device by name   Simon Glass
• [U-Boot] [PATCH v1 03/18] dm: Add a No-op uclass   Simon Glass
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Simon Glass
• [U-Boot] [PATCH v4 0/4] x86: Add support for booting from TPL   Simon Glass
• [U-Boot] [PATCH v4 1/4] x86: samus: Update device tree for SPL   Simon Glass
• [U-Boot] [PATCH v4 2/4] x86: samus: Update device tree for verified boot   Simon Glass
• [U-Boot] [PATCH v4 3/4] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Simon Glass
• [U-Boot] [PATCH v4 4/4] x86: samus: Add a target to boot through TPL   Simon Glass
• [U-Boot] [PATCH v3 00/18] x86: Add support for booting from TPL   Simon Glass
• [U-Boot] [PATCH] x86: Avoid writing temporary asl files into the source tree   Simon Glass
• [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().   Simon Glass
• [U-Boot] [PATCH v3 1/4] drivers: pci_ep: Introduce UCLASS_PCI_EP uclass   Simon Glass
• [U-Boot] [PATCH v3 2/4] pci_ep: add Cadence PCIe endpoint driver   Simon Glass
• [U-Boot] [PATCH v3 4/4] test: pci_ep: add basic pci_ep tests   Simon Glass
• [U-Boot] [PATCH v3 3/4] pci_ep: add pci endpoint sandbox driver   Simon Glass
• [U-Boot] [PATCH 2/4] ARM: dts: stm32mp: Add iwdg2 support for stm32mp157c   Simon Glass
• [U-Boot] [PATCH] x86: ich-spi: Convert driver to spi-mem ops   Simon Glass
• [U-Boot] [PATCH 00/11] dm: Removal of some boards due to DM_MMC deadline   Simon Glass
• [U-Boot] [PATCH 01/11] patman: Update cros_subprocess to use bytearray   Simon Glass
• [U-Boot] [PATCH 02/11] Add a simple script to remove boards   Simon Glass
• [U-Boot] [PATCH 03/11] solidrun: Fix soldrun typo   Simon Glass
• [U-Boot] [PATCH 04/11] atmel: gurnard: Complete DM migration   Simon Glass
• [U-Boot] [PATCH 05/11] bubblegum_96: Complete DM migration   Simon Glass
• [U-Boot] [PATCH 06/11] arm: Remove s32v234evb board   Simon Glass
• [U-Boot] [PATCH 07/11] arm: Remove ls1088ardb_sdcard_qspi_SECURE_BOOT board   Simon Glass
• [U-Boot] [PATCH 08/11] arm: Remove ls1046ardb_sdcard_SECURE_BOOT board   Simon Glass
• [U-Boot] [PATCH 09/11] arm: Remove ls1043ardb_sdcard_SECURE_BOOT board   Simon Glass
• [U-Boot] [PATCH 10/11] evb-ast2500: Enable CONFIG_DM_MMC   Simon Glass
• [U-Boot] [PATCH 11/11] vf610twr/_nand: Enable CONFIG_DM_MMC   Simon Glass
• [U-Boot] [PATCH 00/11] dm: Removal of some boards due to DM_MMC deadline   Simon Glass
• [U-Boot] [PATCH 02/11] Add a simple script to remove boards   Simon Glass
• [U-Boot] [PATCH 00/11] dm: Removal of some boards due to DM_MMC deadline   Simon Glass
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Glass
• [U-Boot] [PATCH v3 2/2] fit: Support compat string property in configuration node   Simon Glass
• [U-Boot] [PATCH v3 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs   Simon Glass
• [U-Boot] [PATCH v4 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs   Simon Glass
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Glass
• [U-Boot] [PATCH v3 2/2] fit: Support compat string property in configuration node   Simon Glass
• [U-Boot] [PATCH 00/21] patman: Update to support Python 3   Simon Glass
• [U-Boot] [PATCH 01/21] patman: Update cros_subprocess to use bytearray   Simon Glass
• [U-Boot] [PATCH 02/21] patman: Convert print statements to Python 3   Simon Glass
• [U-Boot] [PATCH 03/21] binman: Convert print statements to Python 3   Simon Glass
• [U-Boot] [PATCH 04/21] binman: Don't show errors for failed tests   Simon Glass
• [U-Boot] [PATCH 05/21] binman: Remove use of Set()   Simon Glass
• [U-Boot] [PATCH 06/21] patman: Use items() instead of iteritems()   Simon Glass
• [U-Boot] [PATCH 07/21] binman: Use items() instead of iteritems()   Simon Glass
• [U-Boot] [PATCH 08/21] tools: binman: Open all binary files in binary mode   Simon Glass
• [U-Boot] [PATCH 09/21] tools: dtoc: Open all binary files in binary mode   Simon Glass
• [U-Boot] [PATCH 10/21] patman: Provide a way to get program output in binary mode   Simon Glass
• [U-Boot] [PATCH 11/21] binman: Use binary mode when compressing data   Simon Glass
• [U-Boot] [PATCH 12/21] binman: Drop an unused input file   Simon Glass
• [U-Boot] [PATCH 13/21] binman: Handle repeated bytes for Python 3   Simon Glass
• [U-Boot] [PATCH 14/21] Add a simple script to remove boards   Simon Glass
• [U-Boot] [PATCH 15/21] patman: Support use of stringIO in Python 3   Simon Glass
• [U-Boot] [PATCH 16/21] patman: Move unicode helpers to tools   Simon Glass
• [U-Boot] [PATCH 17/21] patman: Sort series output for repeatabily   Simon Glass
• [U-Boot] [PATCH 18/21] patman: Avoid unicode type in settings unit tests   Simon Glass
• [U-Boot] [PATCH 19/21] patman: Adjust functional tests for Python 3   Simon Glass
• [U-Boot] [PATCH 20/21] patman: Tidy up a few more unicode conversions   Simon Glass
• [U-Boot] [PATCH 21/21] patman: Don't require Python 2   Simon Glass
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Glass
• [U-Boot] [PATCH v4 2/2] fit: Support compat string property in configuration node   Simon Glass
• [U-Boot] [PATCH v4 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Glass
• [U-Boot] [PATCH 00/24] binman: dtoc: Convert to Python 3   Simon Glass
• [U-Boot] [PATCH 01/24] dtoc: Adjust code for Python 3   Simon Glass
• [U-Boot] [PATCH 02/24] dtoc: Sort platdata output from dtoc   Simon Glass
• [U-Boot] [PATCH 03/24] dtoc: Use GetBytes() to obtain repeating bytes   Simon Glass
• [U-Boot] [PATCH 04/24] dtoc: Move BytesToValue() out of the Prop class   Simon Glass
• [U-Boot] [PATCH 05/24] dtoc: Updates BytesToValue() for Python 3   Simon Glass
• [U-Boot] [PATCH 06/24] dtoc: Use byte type instead of str in fdt   Simon Glass
• [U-Boot] [PATCH 07/24] dtoc: Convert the Fdt.Prop class to Python 3   Simon Glass
• [U-Boot] [PATCH 08/24] dtoc: Convert the Fdt.Node class to Python 3   Simon Glass
• [U-Boot] [PATCH 09/24] dtoc: Use binary mode for reading files   Simon Glass
• [U-Boot] [PATCH 10/24] dtoc: Test full 64-bit properties with FdtCellsToCpu()   Simon Glass
• [U-Boot] [PATCH 11/24] dtoc: Add a unit test for BytesToValue()   Simon Glass
• [U-Boot] [PATCH 12/24] dtoc: Update fdt_util for Python 3   Simon Glass
• [U-Boot] [PATCH 13/24] dtoc: Update dtb_platdata to support Python 3   Simon Glass
• [U-Boot] [PATCH 14/24] patman: Allow reading files in text mode   Simon Glass
• [U-Boot] [PATCH 15/24] binman: Avoid changing a dict during iteration   Simon Glass
• [U-Boot] [PATCH 16/24] binman: Convert to use bytes type   Simon Glass
• [U-Boot] [PATCH 17/24] binman: Update entry_test to support Python 3   Simon Glass
• [U-Boot] [PATCH 18/24] patman: Update fmap code for Python 3   Simon Glass
• [U-Boot] [PATCH 19/24] binman: Update 'text' entry for Python 3   Simon Glass
• [U-Boot] [PATCH 20/24] binman: Fix up a format string in AssertInList()   Simon Glass
• [U-Boot] [PATCH 21/24] binman: Read map files as text   Simon Glass
• [U-Boot] [PATCH 22/24] binman: Document parallel tests   Simon Glass
• [U-Boot] [PATCH 23/24] binman: Update the README.entries file   Simon Glass
• [U-Boot] [PATCH 24/24] patman: Update cover-coverage tests for Python 3   Simon Glass
• [U-Boot] [PATCH 14/21] Add a simple script to remove boards   Simon Glass
• [U-Boot] [PATCH v3] Add a simple script to remove boards   Simon Glass
• [U-Boot] U-Boot, efi-x86_app and gcc-8.1?   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3399-puma: Reduce SPL size.   Simon Glass
• [U-Boot] [PATCH] rockchip: rk3399-puma: Move ENV_OFFSET to end of SPI NOR.   Simon Glass
• [U-Boot] [PATCH 2/2] rk3399: gru: Fix DTS compilation issues.   Simon Glass
• [U-Boot] [PATCH 2/3] rockchip: rk3399: Add option to print on UART3.   Simon Glass
• [U-Boot] [PATCH 1/3] rockchip: pinctrl: rk3399: Add support for UART3.   Simon Glass
• [U-Boot] [PATCH 3/3] rockchip: clk: rk3399: allow requests for all UART clocks   Simon Glass
• [U-Boot] [PATCH 2/2] rockchip: rk3399-puma: Enable SPL_BOUNCE_BUFFER_STATIC.   Simon Glass
• [U-Boot] [PATCH v4 08/13] dm: clk: Define clk_get_parent_rate() for clk operations   Simon Glass
• [U-Boot] [PATCH v4 09/13] dm: clk: Define clk_get_by_id() for clk operations   Simon Glass
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Simon Glass
• [U-Boot] [PATCH 10/13] configs: am65x_hs_evm_r5: All sysfw to be loaded via MMC   Simon Glass
• [U-Boot] [PATCH 1/5] rockchip: rk3328: add spl board file support   Simon Glass
• [U-Boot] [PATCH 2/5] rockchip: rk3328: add config option for SPL   Simon Glass
• [U-Boot] [PATCH 3/5] rockchip: Kconfig: enable SPL support for rk3328   Simon Glass
• [U-Boot] [PATCH 1/6] timer: dw-apb: remove unused DECLARE_GLOBAL_DATA_PTR   Simon Glass
• [U-Boot] [PATCH 4/6] serial: altera_uart: convert to livetree   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v3] dw_mmc: turn on the IO supply   Simon Glass
• [U-Boot] [PATCH 3/3] rk8xx: add a sysreset driver for poweroff   Simon Glass
• [U-Boot] [PATCH v2 04/18] usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glue   Simon Glass
• [U-Boot] [PATCH v2 03/18] dm: Add a No-op uclass   Simon Glass
• [U-Boot] [PATCH v2 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Simon Glass
• [U-Boot] [PATCH v4 00/13] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Simon Glass
• [U-Boot] [PATCH] ata: ahci: drop read-only ahci_ioports members   Simon Glass
• [U-Boot] [PATCH v2 1/3] board_f: Add mach specific DMA address check function.   Simon Glass
• [U-Boot] [PATCH] rockchip: Cleanup of make_fit_atf.py.   Simon Glass
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Simon Glass
• [U-Boot] [PATCH 1/2] fdt: Allow indicating a node is for U-Boot proper only   Simon Glass
• [U-Boot] [PATCH v2 2/3] spl: add relocation support   Simon Glass
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Simon Glass
• [U-Boot] [PATCH] x86: qemu-x86_64: Enable NVMe   Simon Glass
• [U-Boot] [PATCH v4 11/13] clk: test: Provide unit test for clk_get_parent_rate() method   Simon Glass
• [U-Boot] [PATCH 00/17] sandbox: Various bug fixes   Simon Glass
• [U-Boot] [PATCH 01/17] spl: misc: Allow misc drivers in SPL and TPL   Simon Glass
• [U-Boot] [PATCH 02/17] Add an empty stdint.h file   Simon Glass
• [U-Boot] [PATCH 03/17] sandbox: Sync up sandbox64.dts with main DT   Simon Glass
• [U-Boot] [PATCH 04/17] sandbox: Create a common sandbox DT   Simon Glass
• [U-Boot] [PATCH 05/17] sandbox: Add an alias for SPI   Simon Glass
• [U-Boot] [PATCH 06/17] sandbox: Exit when SYSRESET_POWER_OFF is requested   Simon Glass
• [U-Boot] [PATCH 07/17] sandbox: Quit when hang() is called   Simon Glass
• [U-Boot] [PATCH 08/17] sandbox: spl: Lower priority of standard loader   Simon Glass
• [U-Boot] [PATCH 09/17] sandbox: Add a comment to board_init_f()   Simon Glass
• [U-Boot] [PATCH 10/17] sandbox: Allo sdl-config to be overridden   Simon Glass
• [U-Boot] [PATCH 11/17] sandbox: Add a memory {} node   Simon Glass
• [U-Boot] [PATCH 12/17] sandbox: Correct spi flash operation   Simon Glass
• [U-Boot] [PATCH 13/17] sandbox: Add documentation on how to run valgrind   Simon Glass
• [U-Boot] [PATCH 14/17] x86: Add a forward struct declaration in coreboot_tables.h   Simon Glass
• [U-Boot] [PATCH 15/17] bootstage: Add support for TPL record count   Simon Glass
• [U-Boot] [PATCH 16/17] blk: Allow control of the block cache in TPL   Simon Glass
• [U-Boot] [PATCH 17/17] spi: Avoid using malloc() in a critical function   Simon Glass
• [U-Boot] [PATCH v4 00/13] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Simon Glass
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH] drivers: core: use strcmp when find device by name   Simon Glass
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Simon Glass
• [U-Boot] [PATCH v4 00/13] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH v2 3/8] sandbox: add option show_of_embedded for spl test   Simon Glass
• [U-Boot] [PATCH v2 1/8] sandbox: add config for SPL boot with devicetree   Simon Glass
• [U-Boot] [PATCH v2 2/8] fdt: Allow to use EMBEDDED device tree for SPL   Simon Glass
• [U-Boot] [PATCH v2 5/8] test: move SPL test nodes in test device tree   Simon Glass
• [U-Boot] [PATCH v2 6/8] test: check u-boot properties in SPL device tree   Simon Glass
• [U-Boot] [PATCH v2 0/8] fdt: Allow indicating a node is for U-Boot proper only   Simon Glass
• [U-Boot] [PATCH v2 8/8] dm: doc: add documentation for pre-reloc properties in SPL and TPL   Simon Glass
• [U-Boot] [PATCH v1 06/10] kconfig: mmc: move pxa_mmc_generic to kconfig   Simon Glass
• [U-Boot] [PATCH 17/17] spi: Avoid using malloc() in a critical function   Simon Glass
• [U-Boot] [PATCH v1 05/10] dm: core: gracefully handle alias seq without of   Simon Glass
• [U-Boot] [PATCH v1 04/10] Makefile: allow dm_mmc without of_control   Simon Glass
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH 1/2] fdtdec: test: Fix memory leak   Simon Glass
• [U-Boot] [PATCH 17/17] spi: Avoid using malloc() in a critical function   Simon Glass
• [U-Boot] [PATCH 1/2] fdtdec: test: Fix memory leak   Simon Glass
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Simon Glass
• [U-Boot] U-Boot PXA support   Simon Glass
• [U-Boot] Making U-Boot smaller   Simon Glass
• [U-Boot] [PATCH 1/1] cmd: remove unused `display` command   Simon Glass
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Simon Glass
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Simon Glass
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Simon Glass
• [U-Boot] [PATCH v2 0/8] fdt: Allow indicating a node is for U-Boot proper only   Simon Glass
• [U-Boot] [PATCH v3 1/3] test: check u-boot properties in SPL device tree   Simon Glass
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] Please pull u-boot-dm   Simon Glass
• [U-Boot] [PATCH v2 02/10] spl: misc: Allow misc drivers in SPL and TPL   Simon Glass
• [U-Boot] [PATCH 02/17] Add an empty stdint.h file   Simon Glass
• [U-Boot] [PATCH 2/2] fdtdec: Remove fdt_{addr,size}_unpack()   Simon Glass
• [U-Boot] [PATCH v2 1/1] common: fdt_support: Check mtdparts cell size   Simon Glass
• [U-Boot] [RESEND PATCH] core: ofnode: Add ofnode_get_addr_size_index   Simon Glass
• [U-Boot] [PATCH] buildman: Deal more nicely with invalid build-status file   Simon Glass
• [U-Boot] [PATCH] core: ofnode: Have ofnode_read_u32_default return a u32   Simon Glass
• [U-Boot] [PATCH] dm: core: Fix dm_extended_scan_fdt()   Simon Glass
• [U-Boot] [PATCH v2 0/7] sound: Add sound support for Nyan   Simon Glass
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Simon Glass
• [U-Boot] [PATCH] ata: ahci: enable bus mastering   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Simon Glass
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Simon Glass
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Glass
• [U-Boot] [PATCH v2 1/3] board_f: Add mach specific DMA address check function.   Simon Glass
• [U-Boot] [PATCH 1/7] fdt: Introduce fdt_translate_dma_address()   Simon Glass
• [U-Boot] [PATCH 2/7] dm: core: Introduce xxx_translate_dma_address()   Simon Glass
• [U-Boot] [PATCH 3/7] remoteproc: add da_to_pa ops   Simon Glass
• [U-Boot] [PATCH 4/7] remoteproc: add elf file load support   Simon Glass
• [U-Boot] x86 FSP 2   Simon Glass
• [U-Boot] [RFC] Codepages for console, video, FAT file system   Simon Glass
• [U-Boot] [PATCH] ata: ahci: fix memory leak   Christian Gmeiner
• [U-Boot] [PATCH] ata: ahci: drop read-only ahci_ioports members   Christian Gmeiner
• [U-Boot] [PATCH] ata: ahci: enable bus mastering   Christian Gmeiner
• [U-Boot] [PATCH] ata: ahci: enable bus mastering   Christian Gmeiner
• [U-Boot] [PATCH] ata: ahci: enable bus mastering   Christian Gmeiner
• [U-Boot] [PATCH] net: davinci_emac: use driver model (CONFIG_DM_ETH)   Bartosz Golaszewski
• [U-Boot] [PATCH] net: davinci_emac: use driver model (CONFIG_DM_ETH)   Bartosz Golaszewski
• [U-Boot] [PATCH] net: davinci_emac: use driver model (CONFIG_DM_ETH)   Bartosz Golaszewski
• [U-Boot] [PATCH 0/8] davinci: remove older unmaintained boards   Bartosz Golaszewski
• [U-Boot] [PATCH 1/8] calimain: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 2/8] ea20: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 3/8] eco5pk: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 4/8] ipam390: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 5/8] cm_t3517: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 6/8] mt_ventoux: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 7/8] twister: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH 8/8] mcx: remove board   Bartosz Golaszewski
• [U-Boot] [PATCH] cmd: define CMD_DATA_SIZE when CONFIG_CMD_SETEXPR is selected   Bartosz Golaszewski
• [U-Boot] [PATCH 0/5] arm: remove leftover code for dm* SoCs   Bartosz Golaszewski
• [U-Boot] [PATCH] arm: davinci: remove leftover assembly   Bartosz Golaszewski
• [U-Boot] [PATCH 0/4] davinci: fix build warnings   Bartosz Golaszewski
• [U-Boot] [PATCH 1/4] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs   Bartosz Golaszewski
• [U-Boot] [PATCH 2/4] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs   Bartosz Golaszewski
• [U-Boot] [PATCH 3/4] i2c: remove i2c driver-model compatibility layer   Bartosz Golaszewski
• [U-Boot] [PATCH 4/4] omapl138_lcdk_defconfig: don't build support for SPI   Bartosz Golaszewski
• [U-Boot] [PATCH 0/4] davinci: omapl138-lcdk: enable CONFIG_SPL_DM   Bartosz Golaszewski
• [U-Boot] [PATCH 1/4] davinci: omapl138-lcdk: enable SPL_SYS_MALLOC_SIMPLE   Bartosz Golaszewski
• [U-Boot] [PATCH 2/4] davinci: omapl138-lcdk: enable CONFIG_USE_TINY_PRINTF   Bartosz Golaszewski
• [U-Boot] [PATCH 3/4] davinci: omapl138-lcdk: remove unneeded includes   Bartosz Golaszewski
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH] configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT   Bartosz Golaszewski
• [U-Boot] [PATCH v2 0/2] davinci: remove leftover low-level routines   Bartosz Golaszewski
• [U-Boot] [PATCH v2 1/2] configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT   Bartosz Golaszewski
• [U-Boot] [PATCH v2 2/2] arm: davinci: remove leftover assembly   Bartosz Golaszewski
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH 4/4] davinci: omapl138-lcdk: enable driver-model in SPL   Bartosz Golaszewski
• [U-Boot] [PATCH] arm: davinci: remove leftover assembly   Bartosz Golaszewski
• [U-Boot] [PATCH] ARM: davinci: Remove ipam390 linker script from Kconfig   Bartosz Golaszewski
• [U-Boot] [PATCH] net: davinci_emac: convert to using the driver model   Bartosz Golaszewski
• [U-Boot] cyclone5 reboot: warm or cold reset?   Simon Goldschmidt
• [U-Boot] [PATCH 1/2 v2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Goldschmidt
• [U-Boot] [PATCH v12 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Simon Goldschmidt
• [U-Boot] [PATCH v12 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   Simon Goldschmidt
• [U-Boot] [PATCH] board_f: Do not mark pre-relocated fdt space as reserved   Simon Goldschmidt
• [U-Boot] [PATCH] fdt_shrink_to_minimum: do not mark fdt space reserved unconditionally   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH] sysreset: add support for socfpga sysreset   Simon Goldschmidt
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Simon Goldschmidt
• [U-Boot] [PATCH] sysreset: add support for socfpga sysreset   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH v5 2/2] dlmalloc: fix malloc range at end of ram   Simon Goldschmidt
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Simon Goldschmidt
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH v5 2/2] dlmalloc: fix malloc range at end of ram   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH v12 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Simon Goldschmidt
• [U-Boot] [PATCH v2 1/2] arm: socfpga: rst: add register definition for cold reset   Simon Goldschmidt
• [U-Boot] [PATCH v2 2/2] sysreset: add support for socfpga sysreset   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Simon Goldschmidt
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Simon Goldschmidt
• [U-Boot] [PATCH v13 0/9] Add support for loading FPGA bitstream   Simon Goldschmidt
• [U-Boot] [PATCH v13 0/9] Add support for loading FPGA bitstream   Simon Goldschmidt
• [U-Boot] [PATCH] bouncebuf: add feature to support buffer only available in DRAM   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Simon Goldschmidt
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Simon Goldschmidt
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] ARM: socfpga: Pull PL310 clearing into common code   Simon Goldschmidt
• [U-Boot] [PATCH 2/2] ARM: socfpga: Clear PL310 early in SPL   Simon Goldschmidt
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Simon Goldschmidt
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Simon Goldschmidt
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Simon Goldschmidt
• [U-Boot] [PATCH v2] spl: kconfig: separate sysreset and firmware drivers from misc   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/4] arm: socfpga: rst: add register definition for cold reset   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver   Simon Goldschmidt
• [U-Boot] [PATCH v3 3/4] sysreset: socfpga: stratix10: add sysreset driver   Simon Goldschmidt
• [U-Boot] [PATCH v3 4/4] sysreset: add support for socfpga sysreset   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"   Simon Goldschmidt
• [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver   Simon Goldschmidt
• [U-Boot] [PATCH] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"   Simon Goldschmidt
• [U-Boot] [PATCH 0/6] arm: socfpga: convert drivers to dm livetree   Simon Goldschmidt
• [U-Boot] [PATCH 1/6] timer: dw-apb: remove unused DECLARE_GLOBAL_DATA_PTR   Simon Goldschmidt
• [U-Boot] [PATCH 2/6] spi: cadence_qspi: convert to livetree   Simon Goldschmidt
• [U-Boot] [PATCH 3/6] spi: designware: convert to livetree   Simon Goldschmidt
• [U-Boot] [PATCH 4/6] serial: altera_uart: convert to livetree   Simon Goldschmidt
• [U-Boot] [PATCH 5/6] reset: socfpga: convert to livetree   Simon Goldschmidt
• [U-Boot] [PATCH 6/6] gpio: dwapb_gpio: convert to livetree   Simon Goldschmidt
• [U-Boot] [PATCH 01/14] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Simon Goldschmidt
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Simon Goldschmidt
• [U-Boot] [PATCH 08/14] arm: socfpga: agilex: Add CCU support for Agilex   Simon Goldschmidt
• [U-Boot] [PATCH v2] arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board   Simon Goldschmidt
• [U-Boot] [PATCH v2] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] arm: socfpga: remove re-added ad-hoc reset code   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] arm: socfpga: remove re-added ad-hoc reset code   Simon Goldschmidt
• [U-Boot] [PATCH 1/2] arm: socfpga: remove re-added ad-hoc reset code   Simon Goldschmidt
• [U-Boot] [PATCH 2/2] arm: sofcpga: s10: remove unused ad-hoc reset code   Simon Goldschmidt
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Simon Goldschmidt
• [U-Boot] [PATCH 01/14] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Simon Goldschmidt
• [U-Boot] [PATCH 07/14] arm: socfpga: agilex: Add clock manager support   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Simon Goldschmidt
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Simon Goldschmidt
• [U-Boot] AM3517 SPL fails with CONFIG_DM enabled   Simon Goldschmidt
• [U-Boot] AM3517 SPL fails with CONFIG_DM enabled   Simon Goldschmidt
• [U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node   Simon Goldschmidt
• [U-Boot] [PATCH v3 1/6] spl: add Kconfig option to clear bss early   Simon Goldschmidt
• [U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node   Simon Goldschmidt
• [U-Boot] [PATCH v2] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset   Simon Goldschmidt
• [U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset   Simon Goldschmidt
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Simon Goldschmidt
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [PATCH v2] spl: add overall SPL size check   Simon Goldschmidt
• [U-Boot] [MMC] RPMB: Transfer data timeout error   Bharat Gooty
• [U-Boot] [PATCH 1/2] smbios: add parsing API   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: allowable event types in CreateEventEx()   Alexander Graf
• [U-Boot] [PATCH v2 1/1] efi_loader: LoadImage() parameter checks   Graf, Alexander
• [U-Boot] [PATCH v2 1/1] efi_loader: LoadImage() parameter checks   Graf, Alexander
• [U-Boot] [PATCH v2 1/1] efi_loader: LoadImage() parameter checks   Graf, Alexander
• [U-Boot] [PATCH 1/1] efi_loader: signature of ExitBootServices()   Graf, Alexander
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Graf, Alexander
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Graf, Alexander
• [U-Boot] [PATCH 1/1] efi_loader: bootmgr: print a message when loading from BootNext failed   Alexander Graf
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   Alexander Graf
• [U-Boot] efi_loader: efi_runtime_detach()?   Alexander Graf
• [U-Boot] [PATCH 1/1] efi_loader: bootmgr: print a message when loading from BootNext failed   Alexander Graf
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Wolfgang Grandegger
• [U-Boot] [PATCH] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"   Wolfgang Grandegger
• [U-Boot] [PATCH v2] arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board   Wolfgang Grandegger
• [U-Boot] Support for i.MX8QM Boards with SCFW and ATF   Oliver Graute
• [U-Boot] u-boot error undefined instruction   Pierluigi Greto
• [U-Boot] [PATCH] i2c: mxc: Hide kconfig based control in DM_I2C mode   Anatolij Gustschin
• [U-Boot] [PATCH v2 1/2] wandboard: Don't use I2C speed Kconfig settings with DM_I2C   Anatolij Gustschin
• [U-Boot] [PATCH] video: Factor out vidconsole_put_string()   Anatolij Gustschin
• [U-Boot] [PATCH v1 0/6] arm: imx: cx9020: Migrate to DM_VIDEO and DM_GPIO   Anatolij Gustschin
• [U-Boot] [PATCH] imx: mx6sabresd: fix boot hang with video   Anatolij Gustschin
• [U-Boot] [PATCH] video: ipuv3: Set max display bpp to 32   Anatolij Gustschin
• [U-Boot] [PATCH] video: Factor out vidconsole_put_string()   Anatolij Gustschin
• [U-Boot] Please pull u-boot-video   Anatolij Gustschin
• [U-Boot] cfb_console.c: DM_VIDEO conversion questions/suggestions   Anatolij Gustschin
• [U-Boot] DM_VIDEO and splash screen functionality   Anatolij Gustschin
• [U-Boot] [PATCH 8/8] mcx: remove board   Anatolij Gustschin
• [U-Boot] [RESEND, RFC 1/1] splash: display splash in DM_VIDEO configurations   Anatolij Gustschin
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] The CONFIG_DM_I2C_COMPAT option is not available   Chuanhua Han
• [U-Boot] [EXT] Re: The CONFIG_DM_I2C_COMPAT option is not available   Chuanhua Han
• [U-Boot] [PATCH] i2c: pcf2127: fix bug that read wrong time   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [PATCH 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model.   Chuanhua Han
• [U-Boot] [PATCH 2/7] configs: lx2160a: enable DM support for pcf2127 rtc   Chuanhua Han
• [U-Boot] [PATCH 3/7] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes   Chuanhua Han
• [U-Boot] [PATCH 4/7] armv8: lx2160ardb : Add pcf2127 node   Chuanhua Han
• [U-Boot] [PATCH 5/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode   Chuanhua Han
• [U-Boot] [PATCH 6/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A   Chuanhua Han
• [U-Boot] [PATCH 7/7] armv8: lx2160ardb : Add slave nodes under the i2c0 controller   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Chuanhua Han
• [U-Boot] [PATCH v2 1/3] dm: i2c: Add a flag that needs to generate a stop bit   Chuanhua Han
• [U-Boot] [PATCH v2 2/3] i2c: mxc_i2c: The i2c controller generates a stop signal before reading the register data   Chuanhua Han
• [U-Boot] [PATCH v2 3/3] rtc: pcf2127: Fixed bug with rtc settings and getting error time   Chuanhua Han
• [U-Boot] [PATCH v2 1/5] spl: dm: disable SPI DM flash for non-DM SPL   Chuanhua Han
• [U-Boot] [PATCH v2 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [PATCH v2 3/5] powerpc: dts: t2080: add espi controller node support   Chuanhua Han
• [U-Boot] [PATCH v2 4/5] powerpc: dts: t2080qds: add espi slave nodes support   Chuanhua Han
• [U-Boot] [PATCH v2 5/5] configs: enable espi device module in T2080QDS   Chuanhua Han
• [U-Boot] [PATCH v3 0/5] dm: spi: Convert Freescale ESPI driver to driver   Chuanhua Han
• [U-Boot] [PATCH v3 1/5] spl: dm: disable SPI DM flash for non-DM SPL   Chuanhua Han
• [U-Boot] [PATCH v3 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Chuanhua Han
• [U-Boot] [PATCH v3 3/5] powerpc: dts: t2080: add espi controller node support   Chuanhua Han
• [U-Boot] [PATCH v3 4/5] powerpc: dts: t2080qds: add espi slave nodes support   Chuanhua Han
• [U-Boot] [PATCH v3 5/5] configs: enable espi device module in T2080QDS   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 7/7] armv8: lx2160ardb : Add slave nodes under the i2c0 controller   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 6/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 5/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model.   Chuanhua Han
• [U-Boot] [PATCH 1/4] armv8: ls1028a: The ls1028a platform supports the I2C driver model.   Chuanhua Han
• [U-Boot] [PATCH 2/4] gpio: do not include <asm/arch/gpio.h> on ARCH_LS1028A   Chuanhua Han
• [U-Boot] [PATCH 3/4] configs: ls1028a: enable DM support for pcf2127 rtc   Chuanhua Han
• [U-Boot] [PATCH 4/4] armv8: dts: ls1028ardb: Add slave nodes under the i2c0 controller   Chuanhua Han
• [U-Boot] [PATCH 1/2] dm: i2c: Add a flag that not call i2c_setup_offset   Chuanhua Han
• [U-Boot] [PATCH 2/2] rtc: pcf2127: Fixed bug with rtc settings and getting error time   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH v2 1/5] spl: dm: disable SPI DM flash for non-DM SPL   Chuanhua Han
• [U-Boot] [EXT] Re: [PATCH v2 1/5] spl: dm: disable SPI DM flash for non-DM SPL   Chuanhua Han
• [U-Boot] [RFC/RESEND 01/22] arm: introduce ARCH_THUNDERX   Tim Harvey
• [U-Boot] [v1] ls1028a: hdp: Add support for HDP firmware loading   Wen He
• [U-Boot] [v1] ls1028a: hdp: Add support for HDP firmware loading   Wen He
• [U-Boot] [v1] ls1028a: video: Add a empty video hw init for LS1028A   Wen He
• [U-Boot] [v2] board: ls1028a: Add an empty video hw init function   Wen He
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] [PATCH] Convert CONFIG_IP_DEFRAG to Kconfig   Joe Hershberger
• [U-Boot] [PATCH] eth: mtk-eth: fix incorrect read of phy-handle   Joe Hershberger
• [U-Boot] [PATCH] net: davinci_emac: use driver model (CONFIG_DM_ETH)   Joe Hershberger
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Joe Hershberger
• [U-Boot] [PATCH v1] net: use block layer in net driver   Joe Hershberger
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Joe Hershberger
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Joe Hershberger
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Joe Hershberger
• [U-Boot] [PATCH 5/9] net: sh_eth: Add RZ/A1 support   Joe Hershberger
• [U-Boot] [PATCH 6/9] net: sh_eth: Add support for operation without clock framework   Joe Hershberger
• [U-Boot] [PATCH 1/3] net: mscc: luton: Update network driver for pcb90   Joe Hershberger
• [U-Boot] [PATCH 2/5] net: dwc_eth_qos: add Ethernet stm32mp1 support   Joe Hershberger
• [U-Boot] [RESEND PATCH 1/2] net: rtl8169: Implement ->hwaddr_write() callback   Joe Hershberger
• [U-Boot] [PATCH 1/3] net: mscc: luton: Update network driver for pcb90   Joe Hershberger
• [U-Boot] [PATCH 2/5] net: dwc_eth_qos: add Ethernet stm32mp1 support   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] Pull request: u-boot-net.git master   Joe Hershberger
• [U-Boot] net: phy: micrel: Allow KSZ8xxx and KSZ90x1 to be used together   Joe Hershberger
• [U-Boot] phy: ti: Init node before reading   Joe Hershberger
• [U-Boot] net: rtl8169: Implement ->hwaddr_write() callback   Joe Hershberger
• [U-Boot] net: rtl8169: Support RTL-8168h/8111h   Joe Hershberger
• [U-Boot] eth: mtk-eth: fix incorrect read of phy-handle   Joe Hershberger
• [U-Boot] [PATCH v3 2/2] net: eth-uclass: Support device tree MAC addresses   Joe Hershberger
• [U-Boot] [PATCH v1 05/18] usb: dwc3: switch to peripheral mode when exiting   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 03/18] dm: Add a No-op uclass   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 12/18] usb: dwc3: Add dwc3_of_parse() to get quirks information from DT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Jean-Jacques Hiblot
• [U-Boot] DM for ci_udc   Jean-Jacques Hiblot
• [U-Boot] [PATCH v1 03/18] dm: Add a No-op uclass   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 01/18] usb: dwc3-generic: remove dm_scan_fdt_dev() from the remove() callback   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 02/18] usb: host: remove the xhci-zynqmp driver   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 03/18] dm: Add a No-op uclass   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 04/18] usb: dwc3: Use UCLASS_NOP instead of UCLASS_MISC for the DWC3 generic glue   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 05/18] usb: dwc3: switch to peripheral mode when exiting   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 06/18] usb: xhci: move xhci.h to include usb   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 07/18] usb: dwc3: always use the inlined version of dwc3_host_init/dwc3_host_exit   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 08/18] usb: dwc3-generic: use platdata   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 09/18] usb: dwc3-generic: factorize code   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 10/18] usb: dwc3-generic: add a new host driver that uses the dwc3 core   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 11/18] usb: dwc3-generic: if no max speed is specified in DT, assume super speed   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 12/18] usb: dwc3: Add dwc3_of_parse() to get quirks information from DT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 13/18] usb: dwc3: Kconfig: get rid of obsolete mode selection   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 14/18] ARM: keystone: increase PSC timeout   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 15/18] ARM: keystone: Do not enable the USB power domains at the board level   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 16/18] phy: keystone-usb: handle the transition of the USB power domain   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 17/18] configs: k2g_evm_defconfig: disable XHCI_DWC3 and enable KEYSTONE_USB_PHY   Jean-Jacques Hiblot
• [U-Boot] [PATCH v2 18/18] ARM: DTS: keystone: complete the description of the USB PHY devices   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 00/12] Add support for applications of overlays in SPL   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 01/12] spl: fit: Add support for applying DT overlay   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 02/12] spl: fit: Make room in the FDT before applying overlays   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 03/12] spl: fit: allocate a temporary buffer to load the overlays   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 04/12] spl: fit: Do not fail immediately if an overlay is not available   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 05/12] spl: fit: be more verbose when an error occurs when applying the overlays   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 06/12] Makefile.lib: include /__symbols__ in dtb if SPL_LOAD_FIT_APPLY_OVERLAY is enabled   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 07/12] Makefile: Fix tests for CONFIG_SPL_LOAD_FIT and CONFIG_SPL_FIT_GENERATOR   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 08/12] Makefile: Fix u-boot.itb generation when building outside the source tree   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 09/12] Makefile: Pass the board name to the FIT generator scripts   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 10/12] Makefile: Query the SPL Fit Generator for its dependencies   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 11/12] spl: fit: constify the output parameter of spl_fit_get_image_name()   Jean-Jacques Hiblot
• [U-Boot] [PATCH PATCH v3 12/12] spl: fit: Allow the board to tell if more images must be loaded from FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH] board: am335x/mux: configure the pins for 8-bit data transfer on MMC1   Jean-Jacques Hiblot
• [U-Boot] [PATCHv2 2/2] SPL: Default to disabling legacy image support when using FIT   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Jean-Jacques Hiblot
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Jean-Jacques Hiblot
• [U-Boot] [PATCH 0/6] dm: pci: add Freescale PowerPC PCIe driver   Z.q. Hou
• [U-Boot] [PATCH 1/6] powerpc: mpc85xx: Update the condition to compile PCI routines   Z.q. Hou
• [U-Boot] [PATCH 2/6] powerpc: T208xQDS: Compile the legacy PCIe routines conditionally   Z.q. Hou
• [U-Boot] [PATCH 3/6] t2080: dts: Added PCIe DT nodes   Z.q. Hou
• [U-Boot] [PATCH 4/6] dm: pci: add Freescale PowerPC PCIe driver   Z.q. Hou
• [U-Boot] [PATCH 5/6] powerpc: T208xQDS: Disable legacy PCIe driver   Z.q. Hou
• [U-Boot] [PATCH 6/6] configs: T2080QDS: Enable PCIe driver   Z.q. Hou
• [U-Boot] [PATCHv5 0/8] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Z.q. Hou
• [U-Boot] [PATCHv2 0/8] dm: pci: add Freescale PowerPC PCIe driver   Z.q. Hou
• [U-Boot] [PATCHv2 1/8] powerpc: mpc85xx: Move CONFIG_FSL_PCIE_DISABLE_ASPM to Kconfig   Z.q. Hou
• [U-Boot] [PATCHv2 2/8] powerpc: mpc85xx: Move CONFIG_FSL_PCIE_RESET to Kconfig   Z.q. Hou
• [U-Boot] [PATCHv2 3/8] powerpc: mpc85xx: Update the condition to compile PCI routines   Z.q. Hou
• [U-Boot] [PATCHv2 4/8] powerpc: T208xQDS: Compile the legacy PCIe routines conditionally   Z.q. Hou
• [U-Boot] [PATCHv2 5/8] t2080: dts: Added PCIe DT nodes   Z.q. Hou
• [U-Boot] [PATCHv2 6/8] dm: pci: add Freescale PowerPC PCIe driver   Z.q. Hou
• [U-Boot] [PATCHv2 7/8] powerpc: T208xQDS: Disable legacy PCIe driver   Z.q. Hou
• [U-Boot] [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Z.q. Hou
• [U-Boot] [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Z.q. Hou
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Z.q. Hou
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Z.q. Hou
• [U-Boot] [PATCH 0/2] ARM: davinci: omapl138_lcdk: fix MMC/SD boot breakage.   Peter Howard
• [U-Boot] [PATCH 1/2] ARM: davinci: omal138_lcdk: fix MMC boot breakage due to driver model conversion   Peter Howard
• [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization   Peter Howard
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Greentime Hu
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Greentime Hu
• [U-Boot] [u-boot 1/2] drivers/fsl-mc: Create Kconfig file to manage driver specific configs better   Florinel Iordache
• [U-Boot] [u-boot 2/2] drivers/fsl-mc: Support DPSPARSER object and apply spb command   Florinel Iordache
• [U-Boot] [PATCH] cmd: nvedit: Add sub-command 'env info'   Mark Jonas
• [U-Boot] EFIBootGuard for CIP and SecureBoot   Peter Jones
• [U-Boot] [PATCH v2 0/2] Fix compilation error if CONFIG_USB is disabled   Ajay Kaher
• [U-Boot] [PATCH 1/2] arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT   Minkyu Kang
• [U-Boot] [PATCH v2 2/3] arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT   Minkyu Kang
• [U-Boot] [PATCH v2 1/3] arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C   Minkyu Kang
• [U-Boot] [PATCH v2 3/3] configs: arndale: Use appropriate driver for Asix AX88760   Minkyu Kang
• [U-Boot] please pull u-boot-samsung master   Minkyu Kang
• [U-Boot] [PATCH] tpm: wait for valid status   Roman Kapl
• [U-Boot] [PATCH 1/2] board: lx2160a: fix fsl-mc status in fdt with bootefi   Mian Yousaf Kaukab
• [U-Boot] [PATCH 2/2] board: lx2160a: use default scan_dev_for_boot   Mian Yousaf Kaukab
• [U-Boot] [PATCH] cmd: fat: fatload: pass device path for efi payload   Mian Yousaf Kaukab
• [U-Boot] [PATCH v4 0/5] net: ethernet: ti: Introduce am654 gigabit eth switch subsystem driver   Keerthy
• [U-Boot] [PATCH] dma: ti: k3-udma: Do not touch RT registers before channel configuration   Keerthy
• [U-Boot] [PATCH v2 1/2] power: pmic: palmas/lp87565/lp873x: Remove $SPL from Makefile   Keerthy
• [U-Boot] [PATCH v2 2/2] power: regulator: palmas/lp87565/lp873x: Remove $SPL from Makefile   Keerthy
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Jeremy Kerr
• [U-Boot] [PATCH] rockchip: rk3399-puma: Re-disable SPL_ATF_NO_PLATFORM_PARAM   Mark Kettenis
• [U-Boot] [PATCH 1/2] rk3399: Restore broken USB3 DTS description.   Mark Kettenis
• [U-Boot] U-Boot PXA support   Vasily Khoruzhick
• [U-Boot] [linux-sunxi] [PATCH 0/2] sunxi: A64: enable first USB port on Pine64 boards   Vasily Khoruzhick
• [U-Boot] [PATCHv3 01/10] arm: Remove zipitz2 board   Vasily Khoruzhick
• [U-Boot] [PATCH v3] Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig   Alex Kiernan
• [U-Boot] [PATCH v3] Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig   Alex Kiernan
• [U-Boot] AM3517 SPL fails with CONFIG_DM enabled   Alex Kiernan
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Alex Kiernan
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Alex Kiernan
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Alex Kiernan
• [U-Boot] [linux-sunxi] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB   Code Kipper
• [U-Boot] [linux-sunxi] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB   Code Kipper
• [U-Boot] [linux-sunxi] [PATCH v5] sun8i: h3: Add support for the Beelink-x2 STB   Code Kipper
• [U-Boot] [PATCH v6] sun8i: h3: Add support for the Beelink-x2 STB   Code Kipper
• [U-Boot] [linux-sunxi] [PATCH v6] sun8i: h3: Add support for the Beelink-x2 STB   Code Kipper
• [U-Boot] [PATCH 1/5] nitrogen6x: migrate to using device tree   Troy Kisky
• [U-Boot] [PATCH 2/5] configs: nitrogen6x: Add DM_MMC/DM_USB/AHCI support   Troy Kisky
• [U-Boot] [PATCH 3/5] nitrogen6x: reserve used gpios   Troy Kisky
• [U-Boot] [PATCH 4/5] configs: nitrogen6x: Add DM_GPIO support   Troy Kisky
• [U-Boot] [PATCH 5/5] configs: nitrogen6x: Add DM_SPI/DM_SPI_FLASH support   Troy Kisky
• [U-Boot] [PATCH 5/5] configs: nitrogen6x: Add DM_SPI/DM_SPI_FLASH support   Troy Kisky
• [U-Boot] [PATCH 1/6] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND   Markus Klotzbuecher
• [U-Boot] [PATCH 1/6] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND   Markus Klotzbuecher
• [U-Boot] [PATCH 1/6] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND   Markus Klotzbuecher
• [U-Boot] [PATCH v2 0/9] miscellaneous ubispl and ubi improvements   Markus Klotzbuecher
• [U-Boot] [PATCH v2 1/9] moveconfig: expand simple expressions   Markus Klotzbuecher
• [U-Boot] [PATCH v2 2/9] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND   Markus Klotzbuecher
• [U-Boot] [PATCH v2 3/9] at91, omap2plus: configs: migrate CONFIG_ENV_ to defconfigs   Markus Klotzbuecher
• [U-Boot] [PATCH v2 4/9] env: ubi: support configurable VID offset   Markus Klotzbuecher
• [U-Boot] [PATCH v2 5/9] ubi: fix UBI_SILENCE_MSG   Markus Klotzbuecher
• [U-Boot] [PATCH v2 6/9] ubispl: migrate configuration to Kconfig   Markus Klotzbuecher
• [U-Boot] [PATCH v2 7/9] configs: migrate ubispl boards to KConfig   Markus Klotzbuecher
• [U-Boot] [PATCH v2 8/9] ubispl: add support for loading volumes by name   Markus Klotzbuecher
• [U-Boot] [PATCH v2 9/9] ubispl: introduce separate CONFIG_UBI_SPL_SILENCE_MSG   Markus Klotzbuecher
• [U-Boot] [PATCH v6 0/3] arm64: rockchip: dts: Add rk3399 -u-boot.dtsi files   Paul Kocialkowski
• [U-Boot] [PATCH v6 09/13] rockchip: rk3399: Add Nanopc T4 board support   Paul Kocialkowski
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Paul Kocialkowski
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Paul Kocialkowski
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Paul Kocialkowski
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Paul Kocialkowski
• [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB   Paul Kocialkowski
• [U-Boot] [PATCH 0/5] Add initial support for Pine64 Rock64 board.   Matwey V. Kornilov
• [U-Boot] [PATCH 1/5] rockchip: rk3328: add spl board file support   Matwey V. Kornilov
• [U-Boot] [PATCH 2/5] rockchip: rk3328: add config option for SPL   Matwey V. Kornilov
• [U-Boot] [PATCH 3/5] rockchip: Kconfig: enable SPL support for rk3328   Matwey V. Kornilov
• [U-Boot] [PATCH 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts   Matwey V. Kornilov
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Matwey V. Kornilov
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Matwey V. Kornilov
• [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board   Matwey V. Kornilov
• [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support   Matwey V. Kornilov
• [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support   Matwey V. Kornilov
• [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328   Matwey V. Kornilov
• [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts   Matwey V. Kornilov
• [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Matwey V. Kornilov
• [U-Boot] [PATCH 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts   Matwey V. Kornilov
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Matwey V. Kornilov
• [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Matwey V. Kornilov
• [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Matwey V. Kornilov
• [U-Boot] [PATCH 0/1] Add MikroTik CRS305-1G-4S+IN board support   Luka Kovacic
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Luka Kovacic
• [U-Boot] [PATCH 0/1] [RESEND] Add MikroTik CRS305-1G-4S+IN board support   Luka Kovacic
• [U-Boot] [PATCH 1/1] [RESEND] arm: mvebu: Add CRS305-1G-4S board   Luka Kovacic
• [U-Boot] [PATCH 0/1] Add MikroTik CRS305-1G-4S+IN board support   Luka Kovacic
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Luka Kovacic
• [U-Boot] [PATCH 0/1] Add MikroTik CRS305-1G-4S+IN board support   Luka Kovacic
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Luka Kovacic
• [U-Boot] [PATCH 1/1 v3] arm: mvebu: Add CRS305-1G-4S board   Luka Kovacic
• [U-Boot] [PATCH 1/1 v4] arm: mvebu: Add CRS305-1G-4S board   Luka Kovacic
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Luka Kovačič
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Luka Kovačič
• [U-Boot] [PATCH v2 1/3] arm: exynos: arndale: Remove unused CONFIG_POWER and CONFIG_POWER_I2C   Krzysztof Kozlowski
• [U-Boot] [PATCH v2 2/3] arm: exynos: arndale: Remove unused CONFIG_DM_I2C_COMPAT   Krzysztof Kozlowski
• [U-Boot] [PATCH v2 3/3] configs: arndale: Use appropriate driver for Asix AX88760   Krzysztof Kozlowski
• [U-Boot] [PATCH] arm: exynos: odroid: Fix the confict scripaddr extra env setting   Krzysztof Kozlowski
• [U-Boot] [PATCH 1/6] arm: dts: imx8qm: add lpuart1, lpuart2, lpuart3, lpuart4   Max Krummenacher
• [U-Boot] [PATCH 2/6] arm: dts: imx8qm: add support for i2c0, i2c1, i2c2, i2c3 and i2c4   Max Krummenacher
• [U-Boot] [PATCH 3/6] clk: imx8qm: fix usdhc2 clocks   Max Krummenacher
• [U-Boot] [PATCH 4/6] imx8qm: fix cpu frequency reporting   Max Krummenacher
• [U-Boot] [PATCH 5/6] imx8: fuse: fix fuse driver   Max Krummenacher
• [U-Boot] [PATCH 6/6] board: toradex: add apalis imx8qm 4gb wb it v1.0b module support   Max Krummenacher
• [U-Boot] [EXT] Re: [PATCH 2/2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands   Ashish Kumar
• [U-Boot] [EXT] Re: [PATCH v2] mtd: spi: Improve spi_nor_write_data() implementation   Ashish Kumar
• [U-Boot] [EXT] Re: [PATCH 2/2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands   Ashish Kumar
• [U-Boot] [PATCH] configs: Unset CONFIG_SPI_FLASH_BAR, move CONFIG_FSL_QSPI to defconfig   Ashish Kumar
• [U-Boot] [PATCH] drivers: net: mc: Report extra memory to Linux   Prabhakar Kushwaha
• [U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: ls1046afrwy: Add support for LS1046AFRWY platform   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] drivers: net: mc: Report extra memory to Linux   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] cover letter for drivers: net: mc: Report extra memory to linux   Prabhakar Kushwaha
• [U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106   Prabhakar Kushwaha
• [U-Boot] [PATCHv2 11/11] configs: Disable now unbuildable SPI options for boards   Prabhakar Kushwaha
• [U-Boot] Please pull u-boot-fsl-qoriq master   Prabhakar Kushwaha
• [U-Boot] [PATCH v4] configs: ls1046: Update mtd-id for QSPI nor in mtdparts variable   Prabhakar Kushwaha
• [U-Boot] [PATCHv5 0/8] pci: Add PCIe Gen4 controller driver for NXP Layerscape SoCs   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3 v3] armv8: ls1028ardb: Add support for LS1028ARDB platform   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3 v3] armv8: ls1028aqds: Add support of LS1028AQDS   Prabhakar Kushwaha
• [U-Boot] [PATCH] Enable CONFIG_SPI_FLASH to Kconfig for non-TFA   Prabhakar Kushwaha
• [U-Boot] [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node   Prabhakar Kushwaha
• [U-Boot] [v2 2/2] scsi: ceva: Clean up the driver code   Prabhakar Kushwaha
• [U-Boot] [EXT] [PATCH] armv8: lx2160ardb: invert AQR107 pins polarity   Prabhakar Kushwaha
• [U-Boot] [Patch v2] armv8: Secure Boot: Modify boot_a_script definition   Prabhakar Kushwaha
• [U-Boot] [Patch v3] armv8: fsl-layerscape: Set env_loc to ENVL_NOWHERE with CONFIG_ENV_IS_NOWHERE.   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/3] configs: Unset CONFIG_SPI_BAR for all LS1088A defconfigs   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3] configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigs   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/3] configs: Unset CONFIG_SPI_BAR for all LS1046A defconfigs   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/3] configs: Unset CONFIG_SPI_BAR for all LS2080A/LS2081A defconfigs   Prabhakar Kushwaha
• [U-Boot] [PATCH 0/3] add new wdt driver for sp805   Prabhakar Kushwaha
• [U-Boot] [PATCH v1] armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.h   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: ls1028ardb: Add sd and emmc related environments   Prabhakar Kushwaha
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Prabhakar Kushwaha
• [U-Boot] [PATCH] board: fsl: lx2160a: implement board_fix_fdt   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/1] configs:ls1046afrwy: Add tfa secure boot defonfig.   Prabhakar Kushwaha
• [U-Boot] [v1] ls1028a: hdp: Add support for HDP firmware loading   Prabhakar Kushwaha
• [U-Boot] [PATCH v4 1/2] armv8: fsl-lsch3: add clock support for the second eSDHC   Prabhakar Kushwaha
• [U-Boot] [PATCH v4 2/2] mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled   Prabhakar Kushwaha
• [U-Boot] [PATCH v5] board/fsl/lx2160a: Fix MC firmware loading during SD boot   Prabhakar Kushwaha
• [U-Boot] [PATCH] armv8: ls1028ardb: Add sd and emmc related environments   Prabhakar Kushwaha
• [U-Boot] [PATCH v2] armv8: ls1028ardb: Add sd and emmc related environments   Prabhakar Kushwaha
• [U-Boot] [PATCH v3] drivers: net: mc: Report extra memory to Linux   Prabhakar Kushwaha
• [U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106   Prabhakar Kushwaha
• [U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106   Prabhakar Kushwaha
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Prabhakar Kushwaha
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Prabhakar Kushwaha
• [U-Boot] Please pull u-boot-fsl-qoriq master   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 1/8] ppc: t2080qds: add eSDHC node   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 2/8] mmc: fsl_esdhc: ppc: set sdhc clock   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 3/8] mmc: fsl_esdhc: ppc: adopt 32 bit address   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 4/8] configs: enable device tree support for T2080QDS   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 5/8] configs: enable eSDHC device module in T2080QDS   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 6/8] ppc: t2080qds: add usb node   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 7/8] usb: ehci: ppc: adopt 32 bit address   Prabhakar Kushwaha
• [U-Boot] [PATCH v3 8/8] configs: enable usb device module in T2080QDS   Prabhakar Kushwaha
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Prabhakar Kushwaha
• [U-Boot] [PATCH 2/4] ppc: t2080qds: add sata node   Prabhakar Kushwaha
• [U-Boot] [PATCH 3/4] powerpc: mpc85xx: delete FSL_SATA for T2080QDS board.   Prabhakar Kushwaha
• [U-Boot] [PATCH 4/4] configs: enable sata device module in T2080QDS   Prabhakar Kushwaha
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Prabhakar Kushwaha
• [U-Boot] [PATCH] configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT   David Lechner
• [U-Boot] [PATCH] configs/legoev3: define CONFIG_SKIP_LOWLEVEL_INIT   David Lechner
• [U-Boot] [PATCH] ARM: legoev3: convert to driver model   David Lechner
• [U-Boot] [PATCH 8/8] spi: Kconfig: Mark LPC32XX_SSP has BROKEN   Sylvain Lemieux
• [U-Boot] [EXT] Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file   Ye Li
• [U-Boot] [EXT] Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file   Ye Li
• [U-Boot] [PATCH] mx6sl: hab: Fix pu_irom_mmu_enabled address   Breno Matheus Lima
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Eric Lin
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Eric Lin
• [U-Boot] Fwd: [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Eric Lin
• [U-Boot] Fwd: [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Eric Lin
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   Leif Lindholm
• [U-Boot] [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig   Jason Liu
• [U-Boot] [v3, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms   Jason Liu
• [U-Boot] [v2, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig   Y.b. Lu
• [U-Boot] [v3, 2/5] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms   Y.b. Lu
• [U-Boot] [v3, 4/5] mmc: fsl_esdhc: drop i.MX code   Y.b. Lu
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Y.b. Lu
• [U-Boot] [v2, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Y.b. Lu
• [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 2/5] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 4/5] mmc: fsl_esdhc: drop i.MX code   Y.b. Lu
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Y.b. Lu
• [U-Boot] [v4, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v4, 1/5] Move CONFIG_FSL_ESDHC to defconfig   Y.b. Lu
• [U-Boot] [v4, 2/5] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v4, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms   Y.b. Lu
• [U-Boot] [v4, 4/5] mmc: fsl_esdhc: drop i.MX code   Y.b. Lu
• [U-Boot] [v4, 5/5] mmc: fsl_esdhc_imx: drop useless code   Y.b. Lu
• [U-Boot] [v3, 2/5] mmc: split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v4, 0/5] Split fsl_esdhc driver for i.MX   Y.b. Lu
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Y.b. Lu
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [PATCH] armv8: lx2160aqds: Enable sata   Peng Ma
• [U-Boot] [PATCH] armv8: ls1028a: Add ecc address node for sata.   Peng Ma
• [U-Boot] [v2 1/2] ARM: dts: Freescale: Add ecc addr for sata node   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [EXT] Re: [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Peng Ma
• [U-Boot] [PATCH] ARM: dts: ls1021a: Fixed reg for sata node   Peng Ma
• [U-Boot] [PATCH 00/18] autoboot: Tidy up autoboot code   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF   Lukasz Majewski
• [U-Boot] DM for ci_udc   Lukasz Majewski
• [U-Boot] [PATCH v2 3/3] mach-meson: g12a: add DWC2 peripheral mode support   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 00/41] i.MX8MM + CCF   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 01/41] clk: correct get clk_x pointer   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 02/41] clk: fixed-factor: fix get clk_fixed_factor   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 03/41] clk: introduce clk_dev_binded   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 04/41] clk: use clk_dev_binded   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 05/41] clk-provider: sync more clk flags from Linux Kernel   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 06/41] cmd: clk: print err value when clk_get_rate failed   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 07/41] clk: mux: add set parent support   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 08/41] clk: export mux/divider ops   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 10/41] divider set rate supporrt   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 13/41] clk: imx: import clk heplers   Lukasz Majewski
• [U-Boot] [PATCH v2 3/4] cmd: gpt: fix and tidy up help message   Lukasz Majewski
• [U-Boot] [PATCH v2 2/4] disk: efi: Fix memory leak on 'gpt verify'   Lukasz Majewski
• [U-Boot] [PATCH v2 1/4] disk: efi: Fix memory leak on 'gpt guid'   Lukasz Majewski
• [U-Boot] [PATCH v2 4/4] lib: uuid: Fix unseeded PRNG on RANDOM_UUID=y   Lukasz Majewski
• [U-Boot] [PATCH v2 1/4] disk: efi: Fix memory leak on 'gpt guid'   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 08/41] clk: export mux/divider ops   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag   Lukasz Majewski
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 04/41] clk: use clk_dev_binded   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 03/41] clk: introduce clk_dev_binded   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [PATCH v1] config: Update KP's imx53 HSC config to pass key pressed information   Lukasz Majewski
• [U-Boot] [PATCH v1 1/2] config: Update KP's imx53 HSC config to support SWUpdate   Lukasz Majewski
• [U-Boot] [PATCH v1 2/2] config: Update KP's imx53 HSC config to pass key pressed information   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [PATCH v1] config: Update KP's imx53 HSC config to pass key pressed information   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 03/41] clk: introduce clk_dev_binded   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Lukasz Majewski
• [U-Boot] [PATCH v1 0/3] imx: Cleanup i.MX6Q mccmon6 board configuration   Lukasz Majewski
• [U-Boot] [PATCH v1 1/3] ARM: imx: cosmetic: Remove not needed comment from the mccmon6.h file   Lukasz Majewski
• [U-Boot] [PATCH v1 2/3] ARM: imx: config: Disable support for USB on MCCMON6   Lukasz Majewski
• [U-Boot] [PATCH v1 3/3] ARM: imx: Disable 1Gbps support on MCCMON6's KSZ9031 PHY   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Lukasz Majewski
• [U-Boot] [i.MX8MM+CCF 11/41] clk: fixed_rate: export clk_fixed_rate   Lukasz Majewski
• [U-Boot] [PATCH v1 1/4] Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is used   Lukasz Majewski
• [U-Boot] [PATCH v1 2/4] Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFS   Lukasz Majewski
• [U-Boot] [PATCH v1 3/4] Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offset   Lukasz Majewski
• [U-Boot] [PATCH v1 4/4] doc: Update parallel NOR flash related information in README.falcon   Lukasz Majewski
• [U-Boot] [PATCH v2 1/4] Kconfig: Make CMD_SPL_NAND_OFS only available when proper memory is used   Lukasz Majewski
• [U-Boot] [PATCH v2 2/4] Kconfig: cosmetic: Update description of CMD_SPL_NAND_OFS   Lukasz Majewski
• [U-Boot] [PATCH v2 3/4] Kconfig: Add CMD_SPL_NOR_OFS config for falcon boot argument offset   Lukasz Majewski
• [U-Boot] [PATCH v2 4/4] doc: Update parallel NOR flash related information in README.falcon   Lukasz Majewski
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Lukasz Majewski
• [U-Boot] [PATCH v4 00/13] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v4 01/13] clk: doc: Add documentation entry for Common Clock Framework [CCF] (i.MX)   Lukasz Majewski
• [U-Boot] [PATCH v4 02/13] dm: Fix documentation entry as there is no UCLASS_CLOCK uclass   Lukasz Majewski
• [U-Boot] [PATCH v4 03/13] clk: Remove clock ID check in .get_rate() of clk_fixed_*   Lukasz Majewski
• [U-Boot] [PATCH v4 04/13] clk: Extend struct clk to provide information regarding clock rate   Lukasz Majewski
• [U-Boot] [PATCH v4 05/13] clk: Extend struct clk to provide clock type agnostic flags   Lukasz Majewski
• [U-Boot] [PATCH v4 06/13] clk: Provide struct clk for fixed rate clock (clk_fixed_rate.c)   Lukasz Majewski
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Lukasz Majewski
• [U-Boot] [PATCH v4 08/13] dm: clk: Define clk_get_parent_rate() for clk operations   Lukasz Majewski
• [U-Boot] [PATCH v4 09/13] dm: clk: Define clk_get_by_id() for clk operations   Lukasz Majewski
• [U-Boot] [PATCH v4 10/13] clk: test: Provide unit test for clk_get_by_id() method   Lukasz Majewski
• [U-Boot] [PATCH v4 11/13] clk: test: Provide unit test for clk_get_parent_rate() method   Lukasz Majewski
• [U-Boot] [PATCH v4 12/13] clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v4 13/13] dm: clk: Extend clk_get_parent_rate() to support CLK_GET_RATE_NOCACHE flag   Lukasz Majewski
• [U-Boot] [PATCH v4 04/13] clk: Extend struct clk to provide information regarding clock rate   Lukasz Majewski
• [U-Boot] [PATCH v2 2/3] spl: add relocation support   Lukasz Majewski
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Lukasz Majewski
• [U-Boot] [PATCH v4 12/13] clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v4 09/13] dm: clk: Define clk_get_by_id() for clk operations   Lukasz Majewski
• [U-Boot] [PATCH v4 08/13] dm: clk: Define clk_get_parent_rate() for clk operations   Lukasz Majewski
• [U-Boot] [PATCH v4 00/13] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v4 07/13] dm: clk: Define clk_get_parent() for clk operations   Lukasz Majewski
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v4 00/13] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [PATCH] Revert "mmc: fsl_esdhc: fix sd/mmc ddr mode clock setting issue"   Lukasz Majewski
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Lukasz Majewski
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Lukasz Majewski
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Lukasz Majewski
• [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Lukasz Majewski
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Lukasz Majewski
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Lukasz Majewski
• [U-Boot] [PATCH v1 0/5] imx: dm: Update mccmon6 board to only use DM/DTS in U-Boot proper   Lukasz Majewski
• [U-Boot] [PATCH v1 1/5] ARM: imx: Covnert mccmon6 to use DM/DTS in the u-boot proper   Lukasz Majewski
• [U-Boot] [PATCH v1 2/5] ARM: imx: Decouple mccmon6's SPL and u-boot proper code   Lukasz Majewski
• [U-Boot] [PATCH v1 3/5] spl: nor: Provide falcon boot support for NOR memories   Lukasz Majewski
• [U-Boot] [PATCH v1 4/5] ARM: imx: Convert mccmon6 to use fitImage instead of uImage+DTB   Lukasz Majewski
• [U-Boot] [PATCH v1 5/5] mccmon6: defconfig: nor: Enable usage of *_TINY_* drivers in SPL   Lukasz Majewski
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Lukasz Majewski
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Lukasz Majewski
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Lukasz Majewski
• [U-Boot] [PATCH] i2c: pcf2127: fix bug that read wrong time   Lukasz Majewski
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Lukasz Majewski
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Lukasz Majewski
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Lukasz Majewski
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Lukasz Majewski
• [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX   Lukasz Majewski
• [U-Boot] [PATCH v2 2/3] i2c: mxc_i2c: The i2c controller generates a stop signal before reading the register data   Lukasz Majewski
• [U-Boot] [PATCH] imx: Select the pinctrl drivers when DM is used   Lukasz Majewski
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Lukasz Majewski
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Lukasz Majewski
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Lukasz Majewski
• [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX   Lukasz Majewski
• [U-Boot] [v3, 1/5] Move CONFIG_FSL_ESDHC to defconfig   Lukasz Majewski
• [U-Boot] [v3, 2/5] mmc: split fsl_esdhc driver for i.MX   Lukasz Majewski
• [U-Boot] [v3, 3/5] Convert to use fsl_esdhc_imx for i.MX platforms   Lukasz Majewski
• [U-Boot] [v3, 4/5] mmc: fsl_esdhc: drop i.MX code   Lukasz Majewski
• [U-Boot] [v3, 5/5] mmc: fsl_esdhc_imx: drop useless code   Lukasz Majewski
• [U-Boot] [v4, 0/5] Split fsl_esdhc driver for i.MX   Lukasz Majewski
• [U-Boot] Reading from an arbitrary address over MDIO no longer works   Alex Marginean
• [U-Boot] Reading from an arbitrary address over MDIO no longer works   Alex Marginean
• [U-Boot] [PATCH] armv8: fsl-layerscape: fix config dependency for layerscape pci code   Alex Marginean
• [U-Boot] [PATCH] cmd: mdio: Fix access to arbitrary PHY addresses   Alex Marginean
• [U-Boot] [PATCH] arm: ls1028a: define the integrated PCI bus (ECAM)   Alex Marginean
• [U-Boot] [PATCH v2] armv8: fsl-layerscape: fix config dependency for layerscape pci code   Alex Marginean
• [U-Boot] [PATCH 1/2] drivers: pci: add map_bar support for Enhanced Allocation   Alex Marginean
• [U-Boot] [PATCH 2/2] drivers: pci: add API to issue FLR on a PCI function, if supported   Alex Marginean
• [U-Boot] [PATCH] net: introduce MDIO DM class for MDIO devices   Alex Marginean
• [U-Boot] [PATCH 1/2] drivers: net: add NXP ENETC ethernet driver   Alex Marginean
• [U-Boot] [PATCH 2/2] drivers: net: add NXP ENETC MDIO driver   Alex Marginean
• [U-Boot] [RFC PATCH] net: implement NC-SI network support   Samuel Mendoza-Jonas
• [U-Boot] [PATCH v2 02/50] binman: Don't show image-skip message by default   Bin Meng
• [U-Boot] [PATCH v2 05/50] cros_ec: Use a hyphen in the uclass name   Bin Meng
• [U-Boot] [PATCH v2 06/50] spl: Allow sandbox to build a device-tree file   Bin Meng
• [U-Boot] [PATCH v2 07/50] binman: Allow sections to have an offset   Bin Meng
• [U-Boot] [PATCH v2 17/50] x86: broadwell: Allow SDRAM init from SPL   Bin Meng
• [U-Boot] [PATCH v2 20/50] x86: Add support for starting from SPL/TPL   Bin Meng
• [U-Boot] [PATCH v2 28/50] x86: sysreset: Separate out the EFI code   Bin Meng
• [U-Boot] [PATCH v2 29/50] x86: pch: Add an ioctl to read power-management info   Bin Meng
• [U-Boot] [PATCH v2 30/50] x86: ivybridge: Implement PCH_REQ_PMBASE_INFO   Bin Meng
• [U-Boot] [PATCH v2 31/50] x86: broadwell: Implement PCH_REQ_PMBASE_INFO   Bin Meng
• [U-Boot] [PATCH v2 32/50] x86: sysreset: Implement power-off if available   Bin Meng
• [U-Boot] [PATCH v2 01/50] binman: Don't generate an error in 'text' entry constructor   Bin Meng
• [U-Boot] [PATCH v2 02/50] binman: Don't show image-skip message by default   Bin Meng
• [U-Boot] [PATCH v2 03/50] binman: Add a missing comment in Entry_vblock   Bin Meng
• [U-Boot] [PATCH v2 04/50] dm: core: Fix translate condition in ofnode_get_addr_size()   Bin Meng
• [U-Boot] [PATCH v2 06/50] spl: Allow sandbox to build a device-tree file   Bin Meng
• [U-Boot] [PATCH v2 07/50] binman: Allow sections to have an offset   Bin Meng
• [U-Boot] [PATCH v2 08/50] x86: start64: Fix copyright message   Bin Meng
• [U-Boot] [PATCH v2 09/50] x86: mp_init: Use proper error numbers   Bin Meng
• [U-Boot] [PATCH v2 10/50] x86: Add a way to reinit the cpu   Bin Meng
• [U-Boot] [PATCH v2 11/50] x86: dts: Add device-tree labels for rtc and reset   Bin Meng
• [U-Boot] [PATCH v2 12/50] x86: Update a stale comment about ifdtool   Bin Meng
• [U-Boot] [PATCH v2 13/50] x86: Support SPL and TPL   Bin Meng
• [U-Boot] [PATCH v2 14/50] x86: Support booting with TPL   Bin Meng
• [U-Boot] [PATCH v2 15/50] x86: Add a handoff header file   Bin Meng
• [U-Boot] [PATCH v2 16/50] x86: broadwell: Improve SDRAM debugging output   Bin Meng
• [U-Boot] [PATCH v2 17/50] x86: broadwell: Allow SDRAM init from SPL   Bin Meng
• [U-Boot] [PATCH v2 18/50] x86: Move init of debug UART to cpu.c   Bin Meng
• [U-Boot] [PATCH v2 19/50] x86: broadwell: Split CPU init   Bin Meng
• [U-Boot] [PATCH v2 20/50] x86: Add support for starting from SPL/TPL   Bin Meng
• [U-Boot] [PATCH v2 21/50] x86: Allow 16-bit init to be in TPL   Bin Meng
• [U-Boot] [PATCH v2 22/50] x86: broadwell: Allow booting from SPL   Bin Meng
• [U-Boot] [PATCH v2 23/50] x86: broadwell: Select refcode and CPU code for SPL   Bin Meng
• [U-Boot] [PATCH v2 24/50] x86: Add common Intel code for SPL   Bin Meng
• [U-Boot] [PATCH v2 25/50] x86: Support saving MRC data from SPL   Bin Meng
• [U-Boot] [PATCH v2 26/50] x86: Add a simple TPL implementation   Bin Meng
• [U-Boot] [PATCH v2 27/50] x86: mrccache: Add more debugging   Bin Meng
• [U-Boot] [PATCH v2 29/50] x86: pch: Add an ioctl to read power-management info   Bin Meng
• [U-Boot] [PATCH v2 30/50] x86: ivybridge: Implement PCH_REQ_PMBASE_INFO   Bin Meng
• [U-Boot] [PATCH v2 31/50] x86: broadwell: Implement PCH_REQ_PMBASE_INFO   Bin Meng
• [U-Boot] [PATCH v2 33/50] x86: Support TPL in Intel common code   Bin Meng
• [U-Boot] [PATCH v2 34/50] x86: Don't set up MTRRs in SPL   Bin Meng
• [U-Boot] [PATCH v2 35/50] x86: Don't generate a bootstage report in SPL   Bin Meng
• [U-Boot] [PATCH v2 36/50] x86: Support PCI VGA ROM when TPL is used   Bin Meng
• [U-Boot] [PATCH v2 37/50] x86: sysreset: Implement the get_last() method   Bin Meng
• [U-Boot] [PATCH v2 39/50] x86: samus: Update device tree for SPL   Bin Meng
• [U-Boot] [PATCH v2 41/50] x86: Update device tree for TPL   Bin Meng
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Bin Meng
• [U-Boot] [PATCH v2 46/50] x86: Enable the RTC on all boards   Bin Meng
• [U-Boot] [PATCH v2 47/50] x86: Update the memory map a little   Bin Meng
• [U-Boot] [PATCH v2 48/50] x86: broadwell: Update PCH to work in TPL   Bin Meng
• [U-Boot] [PATCH v2 49/50] x86: Add a way to jump from TPL to SPL   Bin Meng
• [U-Boot] [PATCH v2 00/50] x86: Add support for booting from TPL   Bin Meng
• [U-Boot] [PATCH v3 01/18] cros_ec: Use a hyphen in the uclass name   Bin Meng
• [U-Boot] [PATCH v3 07/18] x86: samus: Update device tree for SPL   Bin Meng
• [U-Boot] [PATCH v3 09/18] x86: Update device tree for TPL   Bin Meng
• [U-Boot] [PATCH v3 14/18] x86: Enable the RTC on all boards   Bin Meng
• [U-Boot] [PATCH v3 01/18] cros_ec: Use a hyphen in the uclass name   Bin Meng
• [U-Boot] [PATCH v3 02/18] x86: Add a simple TPL implementation   Bin Meng
• [U-Boot] [PATCH v3 03/18] x86: sysreset: Separate out the EFI code   Bin Meng
• [U-Boot] [PATCH v3 04/18] x86: sysreset: Implement power-off if available   Bin Meng
• [U-Boot] [PATCH v3 05/18] x86: sysreset: Implement the get_last() method   Bin Meng
• [U-Boot] [PATCH v3 06/18] x86: Add documention on the samus flashmap   Bin Meng
• [U-Boot] [PATCH v3 09/18] x86: Update device tree for TPL   Bin Meng
• [U-Boot] [PATCH v3 10/18] x86: Update device tree for Chromium OS verified boot   Bin Meng
• [U-Boot] [PATCH v3 11/18] x86: Fix device-tree indentation   Bin Meng
• [U-Boot] [PATCH v3 12/18] x86: samus: Increase the pre-reloc memory again   Bin Meng
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Bin Meng
• [U-Boot] [PATCH v3 14/18] x86: Enable the RTC on all boards   Bin Meng
• [U-Boot] [PATCH v3 15/18] x86: Update the memory map a little   Bin Meng
• [U-Boot] [PATCH v3 16/18] x86: broadwell: Update PCH to work in TPL   Bin Meng
• [U-Boot] [PATCH v3 17/18] x86: Add a way to jump from TPL to SPL   Bin Meng
• [U-Boot] [PATCH v3 15/18] x86: Update the memory map a little   Bin Meng
• [U-Boot] [PATCH v3 00/18] x86: Add support for booting from TPL   Bin Meng
• [U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag   Bin Meng
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Bin Meng
• [U-Boot] [PATCH v3 00/18] x86: Add support for booting from TPL   Bin Meng
• [U-Boot] [PATCH v4 1/4] x86: samus: Update device tree for SPL   Bin Meng
• [U-Boot] [PATCH v4 1/4] x86: samus: Update device tree for SPL   Bin Meng
• [U-Boot] [PATCH v4 2/4] x86: samus: Update device tree for verified boot   Bin Meng
• [U-Boot] [PATCH v4 3/4] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Bin Meng
• [U-Boot] [PATCH v4 4/4] x86: samus: Add a target to boot through TPL   Bin Meng
• [U-Boot] [PATCH v3 00/18] x86: Add support for booting from TPL   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [RFC PATCH 1/1] riscv: increase the environment size for the qemu-riscv platform to 128kB   Bin Meng
• [U-Boot] [PATCH v2] riscv:Add Microchip MPFS Icicle board support   Bin Meng
• [U-Boot] [PATCH 2/2] riscv: qemu-riscv.h: define CONFIG_PREBOOT (enables extlinux)   Bin Meng
• [U-Boot] [PATCH 1/2] riscv: set CONFIG_SYS_BOOTM_LEN to SZ_64M   Bin Meng
• [U-Boot] [PATCH 1/3] spi: atcspi200: Change include order   Bin Meng
• [U-Boot] [PATCH 2/3] clk: sifive: fu540-prci: Change include order   Bin Meng
• [U-Boot] [PATCH 3/3] serial: sifive: Change include order   Bin Meng
• [U-Boot] [PATCH v5 6/6] riscv: configs: add ae350_rv[32|64]_xip_defconfig to MAINTAINERS   Bin Meng
• [U-Boot] [PATCH v5 6/6] riscv: configs: add ae350_rv[32|64]_xip_defconfig to MAINTAINERS   Bin Meng
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   Bin Meng
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   Bin Meng
• [U-Boot] [PATCH] dm: core: Fix dm_extended_scan_fdt()   Bin Meng
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   Bin Meng
• [U-Boot] [PATCH] nvme: Fix warning of cast from pointer to integer of different size   Bin Meng
• [U-Boot] [PATCH 1/2] riscv: qemu: Enable PCI host ECAM generic driver   Bin Meng
• [U-Boot] [PATCH 2/2] riscv: qemu: Enable e1000 and nvme support   Bin Meng
• [U-Boot] [PATCH] x86: qemu-x86_64: Enable NVMe   Bin Meng
• [U-Boot] [PATCH v3] riscv: Add Microchip MPFS Icicle board support   Bin Meng
• [U-Boot] [PATCH 0/4] riscv: sifive: fu540: Make GEM 10/100 Mbps work   Bin Meng
• [U-Boot] [PATCH 1/4] clk: sifive: Add clock driver for GEMGXL MGMT   Bin Meng
• [U-Boot] [PATCH 2/4] dm: net: macb: Update macb_linkspd_cb() signature   Bin Meng
• [U-Boot] [PATCH 3/4] dm: net: macb: Implement link speed change callback   Bin Meng
• [U-Boot] [PATCH 4/4] sifive: fu540: Enable GEMGXL MGMT driver   Bin Meng
• [U-Boot] [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Bin Meng
• [U-Boot] [v1] ls1028a: video: Add a empty video hw init for LS1028A   Bin Meng
• [U-Boot] [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Bin Meng
• [U-Boot] [v2] board: ls1028a: Add an empty video hw init function   Bin Meng
• [U-Boot] [PATCH] x86: Avoid writing temporary asl files into the source tree   Bin Meng
• [U-Boot] [PATCH] x86: coreboot: make it possible to process unhandled tags   Bin Meng
• [U-Boot] [PATCH] x86: coreboot: make it possible to process unhandled tags   Bin Meng
• [U-Boot] [EXT] Re: [PATCHv2 1/2] PCI: layerscape: Add Support for ls2088 PCIe EP mode   Bin Meng
• [U-Boot] [PATCH v4 12/13] clk: Port Linux common clock framework [CCF] for imx6q to U-boot (tag: 5.0-rc3)   Bin Meng
• [U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Bin Meng
• [U-Boot] [PATCH 1/1] toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN   Bin Meng
• [U-Boot] [PATCH 1/5] ARM: imx: Call imx_pcie_remove() only for non-DM PCI driver   Bin Meng
• [U-Boot] [PATCH 2/5] pci: imx: Factor out hard-coded register base addresses   Bin Meng
• [U-Boot] [PATCH 3/5] pci: imx: Fix potential 64bit memory access clamping   Bin Meng
• [U-Boot] [PATCH 4/5] pci: imx: Pass driver private data around   Bin Meng
• [U-Boot] [PATCH 5/5] pci: imx: Add DM and DT support   Bin Meng
• [U-Boot] U-Boot, efi-x86_app and gcc-8.1?   Bin Meng
• [U-Boot] [PATCH 14/17] x86: Add a forward struct declaration in coreboot_tables.h   Bin Meng
• [U-Boot] [PATCH 1/2] pci: renesas: Add RCar Gen3 PCIe controller driver   Bin Meng
• [U-Boot] Please pull u-boot-x86   Bin Meng
• [U-Boot] [PATCH] nvme: Fix warning of cast from pointer to integer of different size   Bin Meng
• [U-Boot] [PATCH] x86: qemu-x86_64: Enable NVMe   Bin Meng
• [U-Boot] [PATCH V2 1/2] pci: renesas: Add RCar Gen3 PCIe controller driver   Bin Meng
• [U-Boot] [PATCH V2 2/2] ARM: rmobile: Enable PCIe driver on R-Car Gen3 Salvator-X   Bin Meng
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
• [U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Bin Meng
• [U-Boot] [PATCH u-boot] pci: ensure enumeration of all devices in pci_init   Bin Meng
• [U-Boot] [PATCH 1/4] clk: sifive: Add clock driver for GEMGXL MGMT   Bin Meng
• [U-Boot] [PATCH 3/4] dm: net: macb: Implement link speed change callback   Bin Meng
• [U-Boot] [PATCH v2 0/4] At present the GEM ethernet on SiFive Unleashed board can only work   Bin Meng
• [U-Boot] [PATCH v2 1/4] clk: sifive: Add clock driver for GEMGXL MGMT   Bin Meng
• [U-Boot] [PATCH v2 2/4] dm: net: macb: Update macb_linkspd_cb() signature   Bin Meng
• [U-Boot] [PATCH v2 3/4] dm: net: macb: Implement link speed change callback   Bin Meng
• [U-Boot] [PATCH v2 4/4] riscv: sifive: fu540: Enable GEMGXL MGMT driver   Bin Meng
• [U-Boot] [PATCH V2 1/3] test: dm: adc: use the real device name   Bin Meng
• [U-Boot] [PATCH V2 2/3] test: dm: usb: use the real device name   Bin Meng
• [U-Boot] [PATCH V2 3/3] drivers: core: use strcmp when find device by name   Bin Meng
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
• [U-Boot] [PATCH] ata: ahci: enable bus mastering   Bin Meng
• [U-Boot] x86 FSP 2   Bin Meng
• [U-Boot] [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Bin Meng
• [U-Boot] [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Bin Meng
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Bin Meng
• [U-Boot] [EXT] Re: [PATCHv2 8/8] configs: T2080QDS: Enable PCIe driver   Bin Meng
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
• [U-Boot] [PATCH v2 0/4] At present the GEM ethernet on SiFive Unleashed board can only work   Bin Meng
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   Bin Meng
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Bin Meng
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Bin Meng
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Karsten Merker
• [U-Boot] [RFC PATCH 0/1] riscv: qemu-riscv environment size   Karsten Merker
• [U-Boot] [RFC PATCH 1/1] riscv: increase the environment size for the qemu-riscv platform to 128kB   Karsten Merker
• [U-Boot] [v4 PATCH] RISCV: image: Add booti support   Karsten Merker
• [U-Boot] [PATCH 1/1] env: Exit tools when invalid CRC found   Molloy, Philip
• [U-Boot] [PATCH] arm: exynos: odroid: Fix the confict scripaddr extra env setting   Anand Moon
• [U-Boot] [PATCH] arm: exynos: odroid: Fix the confict scripaddr extra env setting   Anand Moon
• [U-Boot] [PATCH] rockchip: rk3399-puma: Move ENV_OFFSET to end of SPI NOR.   Christoph Muellner
• [U-Boot] [PATCH] rockchip: rk3399-puma: Re-disable SPL_ATF_NO_PLATFORM_PARAM   Christoph Muellner
• [U-Boot] [PATCH] rockchip: rk3399-puma: Reduce SPL size.   Christoph Muellner
• [U-Boot] [PATCH 1/2] rk3399: Restore broken USB3 DTS description.   Christoph Muellner
• [U-Boot] [PATCH 2/2] rk3399: gru: Fix DTS compilation issues.   Christoph Muellner
• [U-Boot] [PATCH 1/3] rockchip: pinctrl: rk3399: Add support for UART3.   Christoph Muellner
• [U-Boot] [PATCH 2/3] rockchip: rk3399: Add option to print on UART3.   Christoph Muellner
• [U-Boot] [PATCH 3/3] rockchip: clk: rk3399: allow requests for all UART clocks   Christoph Muellner
• [U-Boot] [PATCH 1/3] board_f: Add mach specific DMA address check function.   Christoph Muellner
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Muellner
• [U-Boot] [PATCH 3/3] rk3399: Add restriction for DMA-able addresses.   Christoph Muellner
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Christoph Muellner
• [U-Boot] [PATCH 2/2] rockchip: rk3399-puma: Enable SPL_BOUNCE_BUFFER_STATIC.   Christoph Muellner
• [U-Boot] [PATCH] rockchip: Cleanup of make_fit_atf.py.   Christoph Muellner
• [U-Boot] [PATCH v2 1/3] board_f: Add mach specific DMA address check function.   Christoph Muellner
• [U-Boot] [PATCH v2 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Muellner
• [U-Boot] [PATCH v2 3/3] rk3399: Add restriction for DMA-able addresses.   Christoph Muellner
• [U-Boot] [RESEND PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1   Robin Murphy
• [U-Boot] [RFC PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs   Uenal Mutlu
• [U-Boot] [PATCH] rockchip: rk3399-puma: Re-disable SPL_ATF_NO_PLATFORM_PARAM   Christoph Müllner
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Christoph Müllner
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Müllner
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Müllner
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Christoph Müllner
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Müllner
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Christoph Müllner
• [U-Boot] [PATCH] bouncebuf: add feature to support buffer only available in DRAM   Christoph Müllner
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Christoph Müllner
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Müllner
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Christoph Müllner
• [U-Boot] [PATCH] bouncebuf: add feature to support buffer only available in DRAM   Christoph Müllner
• [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().   Christoph Müllner
• [U-Boot] [PATCH v2 1/3] board_f: Add mach specific DMA address check function.   Christoph Müllner
• [U-Boot] [PATCH] rockchip: rk3399-puma: Re-disable SPL_ATF_NO_PLATFORM_PARAM   Christoph Müllner
• [U-Boot] [PATCH] rockchip: rk3399-puma: Reduce SPL size.   Christoph Müllner
• [U-Boot] RFC: config_distro_bootcmd aesthetic change   Jon Nettleton
• [U-Boot] [PATCH 01/14] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Dinh Nguyen
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Dinh Nguyen
• [U-Boot] [PATCH v4 0/8] pico-imx7d: Add support for BL33 case   Jun Nie
• [U-Boot] [PATCH v4 1/8] mx7_common: Share configs to skip low level init   Jun Nie
• [U-Boot] [PATCH v4 2/8] imx: mx7: Skip secure init in arch_cpu_init   Jun Nie
• [U-Boot] [PATCH v4 3/8] pico-imx7d: Correct uart clock root   Jun Nie
• [U-Boot] [PATCH v4 4/8] pico-imx7d: Reserve region of memory to OPTEE   Jun Nie
• [U-Boot] [PATCH v4 5/8] pico-imx7d: Add boot option for verified boot   Jun Nie
• [U-Boot] [PATCH v4 6/8] pico-imx7d: Add bl33 config   Jun Nie
• [U-Boot] [PATCH v4 7/8] pico-imx7d: README: Add BL33 usage case   Jun Nie
• [U-Boot] [PATCH v4 8/8] pico-imx7d: enable boot without PMIC   Jun Nie
• [U-Boot] [PATCH v4 0/8] pico-imx7d: Add support for BL33 case   Jun Nie
• [U-Boot] [PATCH v4 0/8] pico-imx7d: Add support for BL33 case   Jun Nie
• [U-Boot] [PATCH v4 3/8] pico-imx7d: Correct uart clock root   Jun Nie
• [U-Boot] [PATCH v4 8/8] pico-imx7d: enable boot without PMIC   Jun Nie
• [U-Boot] [PATCH 0/7] Add PCIe root complex support for AM654x SoC   Sekhar Nori
• [U-Boot] [PATCH 1/7] clk: add support for clk_is_match()   Sekhar Nori
• [U-Boot] [PATCH 2/7] dm: core: add support for getting register address and size   Sekhar Nori
• [U-Boot] [PATCH 3/7] pcie: ti: add driver for AM65x PCIe RC   Sekhar Nori
• [U-Boot] [PATCH 4/7] phy: add support for AM654x SERDES   Sekhar Nori
• [U-Boot] [PATCH 5/7] configs: am65x_evm_a53: enable PCIe support   Sekhar Nori
• [U-Boot] [PATCH 6/7] arm: dts: k3-am65: add support for PCIe and SERDES   Sekhar Nori
• [U-Boot] [PATCH 7/7] configs: am65x_evm_a53: enable support for PCIe ethernet cards   Sekhar Nori
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Sekhar Nori
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Sekhar Nori
• [U-Boot] MMC boot broken on OMAP-L138 LCDK   Sekhar Nori
• [U-Boot] [PATCH] davinci: spl: Create board_init_f for explicit initialization   Sekhar Nori
• [U-Boot] [PATCH 0/2] ARM: davinci: omapl138_lcdk: fix MMC/SD boot breakage.   Sekhar Nori
• [U-Boot] [PATCH 1/2] ARM: davinci: omal138_lcdk: fix MMC boot breakage due to driver model conversion   Sekhar Nori
• [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization   Sekhar Nori
• [U-Boot] [PATCH 0/2] ARM: davinci: omapl138_lcdk: fix MMC/SD boot breakage.   Sekhar Nori
• [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization   Sekhar Nori
• [U-Boot] [PATCH 2/2] ARM: davinci: SPL: fix BSS initialization   Sekhar Nori
• [U-Boot] [PATCH v2 0/2] ARM: davinci: omapl138_lcdk: fix MMC/SD boot breakage   Sekhar Nori
• [U-Boot] [PATCH v2 1/2] ARM: davinci: omal138_lcdk: fix MMC boot breakage due to driver model conversion   Sekhar Nori
• [U-Boot] [PATCH v2 2/2] ARM: davinci: SPL: fix BSS initialization   Sekhar Nori
• [U-Boot] [PATCH v2 2/2] ARM: davinci: SPL: fix BSS initialization   Sekhar Nori
• [U-Boot] [PATCH v3 0/2] ARM: davinci: omapl138_lcdk: fix MMC/SD boot breakage   Sekhar Nori
• [U-Boot] [PATCH v3 1/2] ARM: davinci: omal138_lcdk: fix MMC boot breakage due to driver model conversion   Sekhar Nori
• [U-Boot] [PATCH v3 2/2] ARM: davinci: SPL: fix BSS initialization   Sekhar Nori
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Bryan O'Donoghue
• [U-Boot] [PATCH v2 0/4] Tidy up some dangling OP-TEE gotchas   Bryan O'Donoghue
• [U-Boot] [PATCH v2 1/4] optee: Make TZDRAM config options contingent on CONFIG_OPTEE   Bryan O'Donoghue
• [U-Boot] [PATCH v2 2/4] warp7: include: configs: Skip low-level init if BOOTM_OPTEE false   Bryan O'Donoghue
• [U-Boot] [PATCH v2 3/4] warp7: configs: bl33: Tidy up OPTEE defines   Bryan O'Donoghue
• [U-Boot] [PATCH v2 4/4] MAINTAINERS: Update lib/optee with my details   Bryan O'Donoghue
• [U-Boot] [PATCH 0/7] Switch WaRP7 BL33 to mbed Linux specific bootflow   Bryan O'Donoghue
• [U-Boot] [PATCH 1/7] warp7_bl33: configs: Enable FIT as the boot.scr format   Bryan O'Donoghue
• [U-Boot] [PATCH 2/7] warp7: include: configs: Specify image name of bootscript in FIT   Bryan O'Donoghue
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Bryan O'Donoghue
• [U-Boot] [PATCH 4/7] warp7_bl33: configs: Enable CONFIG_OF_LIBFDT   Bryan O'Donoghue
• [U-Boot] [PATCH 5/7] warp7_bl33: configs: Enable CONFIG_OF_LIBFDT_OVERLAY   Bryan O'Donoghue
• [U-Boot] [PATCH 6/7] warp7: include: configs: Specify an fdtovaddr   Bryan O'Donoghue
• [U-Boot] [PATCH 7/7] warp7: Specify a default CONFIG_OPTEE_LOAD_ADDR if non provided   Bryan O'Donoghue
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Bryan O'Donoghue
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Bryan O'Donoghue
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Bryan O'Donoghue
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Bryan O'Donoghue
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Joris OFFOUGA
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Joris OFFOUGA
• [U-Boot] [PATCH] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Joris Offouga
• [U-Boot] [EXT] Re: Pull request: u-boot-net.git master   Vladimir Oltean
• [U-Boot] Pull request: u-boot-net.git master   Vladimir Oltean
• [U-Boot] Pull request: u-boot-net.git master   Vladimir Oltean
• [U-Boot] Pull request: u-boot-net.git master   Vladimir Oltean
• [U-Boot] Pull request: u-boot-net.git master   Vladimir Oltean
• [U-Boot] Reading from an arbitrary address over MDIO no longer works   Vladimir Oltean
• [U-Boot] Reading from an arbitrary address over MDIO no longer works   Vladimir Oltean
• [U-Boot] [PATCH] cmd: mdio: Fix access to arbitrary PHY addresses   Vladimir Oltean
• [U-Boot] [BUG] test_avb_persistent_values() fails   Igor Opaniuk
• [U-Boot] [PATCH 1/1] test/py: avb: fix test_avb_persistent_values fail   Igor Opaniuk
• [U-Boot] [BUG] test_avb_persistent_values() fails   Igor Opaniuk
• [U-Boot] [PATCH v3 1/1] colibri_imx7: migrate usb to driver model   Igor Opaniuk
• [U-Boot] [PATCH v3 1/1] colibri_imx7: migrate usb to driver model   Igor Opaniuk
• [U-Boot] [PATCH v4 1/1] colibri_imx7: migrate usb to driver model   Igor Opaniuk
• [U-Boot] [PATCH 1/5] colibri_imx7: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH 2/5] colibri-imx6ull: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH 3/5] colibri_vf: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH 4/5] apalis_imx6: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH 5/5] apalis-tk1: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH 1/1] imx8: cpu: fix warning for cpu_imx_get_temp   Igor Opaniuk
• [U-Boot] [PATCH v2 1/1] imx8: cpu: fix warning for cpu_imx_get_temp   Igor Opaniuk
• [U-Boot] [PATCH v2 1/1] imx8: cpu: fix warning for cpu_imx_get_temp   Igor Opaniuk
• [U-Boot] [PATCH 1/1] imx8: cpu: fix warning for cpu_imx_get_temp   Igor Opaniuk
• [U-Boot] [PATCH 1/1] toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN   Igor Opaniuk
• [U-Boot] [PATCH v3 1/7] cmd: part: Add 'number' sub-command   Igor Opaniuk
• [U-Boot] [PATCH v1 02/10] mmc: fsl_esdhc: annotate endifs   Igor Opaniuk
• [U-Boot] [PATCH v1 01/10] mmc: add missing space before comment delimiter   Igor Opaniuk
• [U-Boot] [PATCH v1 10/10] colibri_pxa270_defconfig: enable dm_mmc   Igor Opaniuk
• [U-Boot] [PATCH 1/1] apalis/colibri imx6: provide proper fdtfile value   Igor Opaniuk
• [U-Boot] cfb_console.c: DM_VIDEO conversion questions/suggestions   Igor Opaniuk
• [U-Boot] cfb_console.c: DM_VIDEO conversion questions/suggestions   Igor Opaniuk
• [U-Boot] DM_VIDEO and splash screen functionality   Igor Opaniuk
• [U-Boot] DM_VIDEO and splash screen functionality   Igor Opaniuk
• [U-Boot] [RFC 1/1] splash: display splash in DM_VIDEO configurations   Igor Opaniuk
• [U-Boot] [RESEND, RFC 1/1] splash: display splash in DM_VIDEO configurations   Igor Opaniuk
• [U-Boot] [PATCH 1/1] splash: display splash in DM_VIDEO configurations   Igor Opaniuk
• [U-Boot] [PATCH v2 1/5] colibri_imx7: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH v2 2/5] colibri-imx6ull: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH v2 3/5] colibri_vf: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH v2 4/5] apalis_imx6: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH v2 5/5] apalis-tk1: use UUID for rootfs   Igor Opaniuk
• [U-Boot] [PATCH 1/1] colibri imx6/t20: enable CONFIG_SYS_WHITE_ON_BLACK   Igor Opaniuk
• [U-Boot] [PATCH 1/1] colibri_imx7: fastboot support   Igor Opaniuk
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Chris Packham
• [U-Boot] [PATCH 3/3] arm: mvebu: db-88f6820-gp: Enabel BLK and DM support   Chris Packham
• [U-Boot] [PATCH 1/1 v4] arm: mvebu: Add CRS305-1G-4S board   Chris Packham
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Chris Packham
• [U-Boot] [PATCH u-boot-marvell 0/6] More fixes for Turris Omnia   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"   Chris Packham
• [U-Boot] [PATCH] arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"   Chris Packham
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Chris Packham
• [U-Boot] [PATCH 14/21] Add a simple script to remove boards   Chris Packham
• [U-Boot] [PATCH 00/21] patman: Update to support Python 3   Chris Packham
• [U-Boot] [PATCH 5/9] arm: mvebu: fix ahci mbus config in SPL   Chris Packham
• [U-Boot] [PATCH 6/9] arm: mvebu: add support for boot from SATA   Chris Packham
• [U-Boot] [PATCH 7/9] arm: mvebu: clearfog: enable SATA in SPL   Chris Packham
• [U-Boot] [PATCH 8/9] arm: mvebu: clearfog: set U-Boot offset for SATA boot   Chris Packham
• [U-Boot] [PATCH 9/9] arm: mvebu: clearfog: document boot from SATA   Chris Packham
• [U-Boot] [PATCH v3] Add a simple script to remove boards   Chris Packham
• [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] usb: dwc3: Handle case where setup_phy is not needed   Siva Durga Prasad Paladugu
• [U-Boot] [PATCH] ARM: mediatek: mt8516: use PSCI to reset the SoC   Fabien Parent
• [U-Boot] [PATCH] board: mediatek: Add pumpkin board support   Fabien Parent
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Anup Patel
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Anup Patel
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Anup Patel
• [U-Boot] [PATCH v2 2/2] RISCV: image: Parse Image.gz support in booti.   Atish Patra
• [U-Boot] [v3 PATCH] RISCV: image: Add booti support.   Atish Patra
• [U-Boot] [v4 PATCH] RISCV: image: Add booti support   Atish Patra
• [U-Boot] [v3 PATCH] RISCV: image: Add booti support.   Atish Patra
• [U-Boot] [v5 PATCH] RISCV: image: Add booti support   Atish Patra
• [U-Boot] [v4 PATCH] RISCV: image: Add booti support   Atish Patra
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Atish Patra
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Atish Patra
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Atish Patra
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Atish Patra
• [U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core   Matt Pelland
• [U-Boot] [PATCH] i2c: mxc: Hide kconfig based control in DM_I2C mode   Trent Piepho
• [U-Boot] [PATCH 2/2] i2c: mxc_i2c: Fix read and read->write xfers in DM mode   Trent Piepho
• [U-Boot] [PATCH v2 1/2] wandboard: Don't use I2C speed Kconfig settings with DM_I2C   Trent Piepho
• [U-Boot] [PATCH v2 2/2] i2c: mxc: Hide kconfig based control in DM_I2C mode   Trent Piepho
• [U-Boot] [PATCH v2 1/2] wandboard: Don't use I2C speed Kconfig settings with DM_I2C   Trent Piepho
• [U-Boot] [PATCH 1/2] cmd: mii: Refactor some of the MII reg dump code   Trent Piepho
• [U-Boot] [PATCH 2/2] cmd: mii: Add the standard 1000BASE-T registers   Trent Piepho
• [U-Boot] [PATCH] net: phy: ti: Use default values for tx/rx delay and fifo size   Trent Piepho
• [U-Boot] [PATCH] core: ofnode: Have ofnode_read_u32_default return a u32   Trent Piepho
• [U-Boot] [PATCH] net: phy: ti: Fix clock output DT property   Trent Piepho
• [U-Boot] [PATCH] fsl-layerscape/ls1046a_serdes.c: fix 0x3363 serdes1 setting   Maciej Pijanowski
• [U-Boot] [PATCH] fsl-layerscape/ls1046a_serdes.c: add 0x3040 serdes1 setting   Maciej Pijanowski
• [U-Boot] [PATCH] configs/ls1046ardb_*: disable CONFIG_SPI_FLASH_USE_4K_SECTORS   Maciej Pijanowski
• [U-Boot] SAMA5D2x and falcon boot mode   Andy Pont
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Sam Protsenko
• [U-Boot] [PATCH] Import include/android_bootloader_message.h from AOSP   Sam Protsenko
• [U-Boot] [PATCH] Import include/android_bootloader_message.h from AOSP   Sam Protsenko
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Sam Protsenko
• [U-Boot] [PATCH v2 1/2] include: android_bootloader_message.h: Minimize the diff to AOSP   Sam Protsenko
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Sam Protsenko
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Sam Protsenko
• [U-Boot] [PATCH v3 0/3] Add 'bcb' command to read/modify/write Android BCB   Sam Protsenko
• [U-Boot] [PATCH 0/2] sunxi: A64: enable first USB port on Pine64 boards   Andre Przywara
• [U-Boot] [PATCH 1/2] sunxi: USB PHY: Support shared PHY 0   Andre Przywara
• [U-Boot] [PATCH 2/2] sunxi: Pine64: DTS: enable USB PHY 0 for HCI0   Andre Przywara
• [U-Boot] [PATCH 0/6] sunxi: H6: Enable USB (2.0) support   Andre Przywara
• [U-Boot] [PATCH 1/6] sunxi: move SUNXI_GPIO to Kconfig   Andre Przywara
• [U-Boot] [PATCH 2/6] sunxi: gpio: Enable support for H6 pin controller   Andre Przywara
• [U-Boot] [PATCH 3/6] sunxi: clocks: Add H6 USB clock gates and resets   Andre Przywara
• [U-Boot] [PATCH 4/6] sunxi: phy: Add USB PHY support for Allwinner H6   Andre Przywara
• [U-Boot] [PATCH 5/6] sunxi: H6: Enable USB for existing boards   Andre Przywara
• [U-Boot] [PATCH 6/6] sunxi: Pine64: DTS: enable USB PHY 0 for HCI0   Andre Przywara
• [U-Boot] [PATCH 2/2] sunxi: Pine64: DTS: enable USB PHY 0 for HCI0   Andre Przywara
• [U-Boot] [linux-sunxi] [PATCH 2/6] sunxi: gpio: Enable support for H6 pin controller   Andre Przywara
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andre Przywara
• [U-Boot] [PATCH] sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig   Andre Przywara
• [U-Boot] [linux-sunxi] [PATCH 0/2] sunxi: A64: enable first USB port on Pine64 boards   André Przywara
• [U-Boot] [linux-sunxi] [PATCH 0/2] sunxi: A64: enable first USB port on Pine64 boards   André Przywara
• [U-Boot] [linux-sunxi] [PATCH] phy: sun4i-usb: Fix PHY0 routing and passby configuration for MUSB   André Przywara
• [U-Boot] [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Clément Péron
• [U-Boot] [linux-sunxi] Re: [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Clément Péron
• [U-Boot] [linux-sunxi] [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Clément Péron
• [U-Boot] sun50i: a64: Beelink GS1 box is likely broken   Clément Péron
• [U-Boot] [PATCH] sun50i: h6: Fix Beelink GS1 board config   Clément Péron
• [U-Boot] [PATCH] sun50i: h6: Fix Beelink GS1 board config   Clément Péron
• [U-Boot] [linux-sunxi] [PATCH v5] sun8i: h3: Add support for the Beelink-x2 STB   Clément Péron
• [U-Boot] [PATCH 3/3] dt: bcm63158: watchdog should use a 50Mhz clock   Philippe REYNES
• [U-Boot] [PATCH 3/3] dt: bcm63158: watchdog should use a 50Mhz clock   Philippe REYNES
• [U-Boot] [PATCH 2/5] net: dwc_eth_qos: add Ethernet stm32mp1 support   Christophe ROULLIER
• [U-Boot] [EXT] Re: [PATCH v2] mtd: spi: Improve spi_nor_write_data() implementation   Vignesh Raghavendra
• [U-Boot] [PATCH 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Urja Rannikko
• [U-Boot] [PATCH 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass   Urja Rannikko
• [U-Boot] [PATCH 3/3] rk8xx: add a sysreset driver for poweroff   Urja Rannikko
• [U-Boot] [PATCH v2] dw_mmc: turn on the IO supply   Urja Rannikko
• [U-Boot] [PATCH v3] dw_mmc: turn on the IO supply   Urja Rannikko
• [U-Boot] [PATCH v2 1/3] configs: Move CONFIG_SPI_FLASH_GIGADEVICE properly into Kconfig   Urja Rannikko
• [U-Boot] [PATCH v2 2/3] configs: Move CONFIG_CMD_USB_MASS_STORAGE properly into Kconfig   Urja Rannikko
• [U-Boot] [PATCH v2 3/3] configs: update rk3288 veyron defconfigs   Urja Rannikko
• [U-Boot] [PATCH 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Urja Rannikko
• [U-Boot] [PATCH 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass   Urja Rannikko
• [U-Boot] [PATCH v2 1/3] sysreset: switch to using SYSRESET_POWER_OFF for poweroff   Urja Rannikko
• [U-Boot] [PATCH v2 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass   Urja Rannikko
• [U-Boot] [PATCH v2 3/3] rk8xx: add a sysreset driver for poweroff   Urja Rannikko
• [U-Boot] [PATCH 17/17] spi: Avoid using malloc() in a critical function   Urja Rannikko
• [U-Boot] [PATCH 17/17] spi: Avoid using malloc() in a critical function   Urja Rannikko
• [U-Boot] [PATCH 00/12] Enable returning back to BootROM from spear SPL   Miquel Raynal
• [U-Boot] [PATCH 01/12] spl: Fix typo in kernel doc   Miquel Raynal
• [U-Boot] [PATCH 02/12] arm: spear: Drop useless board_init_r call   Miquel Raynal
• [U-Boot] [PATCH 03/12] arm: spear: Call the SPL 'SPL', not 'Xloader'   Miquel Raynal
• [U-Boot] [PATCH 04/12] arm: spear: Drop false comment   Miquel Raynal
• [U-Boot] [PATCH 05/12] arm: spear: Fix the main comment in start.S   Miquel Raynal
• [U-Boot] [PATCH 06/12] arm: spear: Purely cosmetic changes in start.S   Miquel Raynal
• [U-Boot] [PATCH 07/12] arm: spear: Use PUSH/POP mnemonics when relevant   Miquel Raynal
• [U-Boot] [PATCH 08/12] arm: spear: Reference the link register with LR instead of R14   Miquel Raynal
• [U-Boot] [PATCH 09/12] arm: spear: Simplify start.S organization   Miquel Raynal
• [U-Boot] [PATCH 10/12] arm: spear: Support returning to BootROM   Miquel Raynal
• [U-Boot] [PATCH 11/12] arm: spear: Do not link the _main branch   Miquel Raynal
• [U-Boot] [PATCH 12/12] arm: spear: Return to BootROM if failing to boot from the main device   Miquel Raynal
• [U-Boot] [PATCH 00/12] Enable returning back to BootROM from spear SPL   Miquel Raynal
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Thierry Reding
• [U-Boot] [PATCH 1/2] fdtdec: Use fdt_setprop_u32() for fdtdec_set_phandle()   Thierry Reding
• [U-Boot] [PATCH 2/2] fdtdec: Remove fdt_{addr,size}_unpack()   Thierry Reding
• [U-Boot] [PATCH v2 45/50] Revert "pci: Scale MAX_PCI_REGIONS based on CONFIG_NR_DRAM_BANKS"   Thierry Reding
• [U-Boot] [PATCH v4 1/2] net: eth-uclass: Write MAC address to hardware after probe   Thierry Reding
• [U-Boot] [PATCH v4 2/2] net: eth-uclass: Support device tree MAC addresses   Thierry Reding
• [U-Boot] [PATCH 1/2] fdtdec: test: Fix memory leak   Thierry Reding
• [U-Boot] [PATCH 2/2] fdtdec: Remove fdt_{addr,size}_unpack()   Thierry Reding
• [U-Boot] [PATCH 1/2] fdtdec: test: Fix memory leak   Thierry Reding
• [U-Boot] [PATCH v4 2/2] net: eth-uclass: Support device tree MAC addresses   Thierry Reding
• [U-Boot] [PATCH 0/3] fix bcm6345 watchdog on broadcom board   Philippe Reynes
• [U-Boot] [PATCH 1/3] watchdog: bcm6345: callback start use tick instead of ms   Philippe Reynes
• [U-Boot] [PATCH 2/3] dt: bcm6858: watchdog should use a 50Mhz clock   Philippe Reynes
• [U-Boot] [PATCH 3/3] dt: bcm63158: watchdog should use a 50Mhz clock   Philippe Reynes
• [U-Boot] [PATCH 1/3] bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT   Philippe Reynes
• [U-Boot] [PATCH 2/3] bcm963158: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT   Philippe Reynes
• [U-Boot] [PATCH 3/3] bcm968380gerg: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT   Philippe Reynes
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-imx u-boot-imx-20190426   Tom Rini
• [U-Boot] [PATCH 2/2] ti: Add am335x-pocketbeagle to am335x_evm_defconfig.   Tom Rini
• [U-Boot] [PATCH v3] Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig   Tom Rini
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Tom Rini
• [U-Boot] [v3 PATCH] RISCV: image: Add booti support.   Tom Rini
• [U-Boot] [PATCH] board/BuR/brsmarc1: initial commit   Tom Rini
• [U-Boot] [PATCH] board/BuR/zynq/brsmarc2: initial commit   Tom Rini
• [U-Boot] [PATCH] board/BuR/brppt2: initial commit   Tom Rini
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Tom Rini
• [U-Boot] [PATCH] arm: zimage: add other-bootloader image magic number   Tom Rini
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Tom Rini
• [U-Boot] [PATCH] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Tom Rini
• [U-Boot] [PATCH v4] ARM: am335x: Add phyCORE AM335x R2 support   Tom Rini
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Tom Rini
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Tom Rini
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2   Tom Rini
• [U-Boot] [PULL, RESEND] Please pull u-boot-rockchip/tags/rockchip-for-2019.07   Tom Rini
• [U-Boot] [PATCH] drivers: dma: ti: k3-udma: Extract packet data only when Meta data is not NULL   Tom Rini
• [U-Boot] [PATCH] MAINTAINERS, git-mailrc: Update the mmc maintainer   Tom Rini
• [U-Boot] [PATCH] firmware: ti_sci: Fix TISCI mailbox receive timeout handling   Tom Rini
• [U-Boot] [PATCH] dma: ti: k3-udma: Do not touch RT registers before channel configuration   Tom Rini
• [U-Boot] [PATCH] watchdog: Kconfig: update WDT help message   Tom Rini
• [U-Boot] [PATCH] board: am335x: Drop duplicate pinmux configuration   Tom Rini
• [U-Boot] [PATCH] armv7R: dts: k3: am654: Switch DMSC TX message thread ID   Tom Rini
• [U-Boot] [PATCH 1/1] fs: correct comments for fs_read() and write()   Tom Rini
• [U-Boot] [PATCH] fs: btrfs: Do not print mount fail message when not btrfs filesystem   Tom Rini
• [U-Boot] [PATCH 1/1] lib/vsprintf: remove #include <uuid.h> from vsprintf.c   Tom Rini
• [U-Boot] [PATCH] lib: Kconfig: fix help text for GZIP   Tom Rini
• [U-Boot] [PATCH] firmware: ti_sci: Always request response from firmware   Tom Rini
• [U-Boot] [PATCH v3 1/1] at91: cleanup taurus port   Tom Rini
• [U-Boot] [PATCH v2] arm: dts: k3-am654: Sync IOPAD macros with Linux   Tom Rini
• [U-Boot] [PATCH 1/2] ti: Add device-tree for am335x-pocketbeagle.   Tom Rini
• [U-Boot] [PATCH 2/2] ti: Add am335x-pocketbeagle to am335x_evm_defconfig.   Tom Rini
• [U-Boot] [PATCH] README: davinci: update the documentation for DaVinci   Tom Rini
• [U-Boot] [PATCH] ARM: dts: logicpd-som-lv: Fix MMC1 card detect   Tom Rini
• [U-Boot] [PATCH] tools/Makefile: fix HOSTCFLAGS with CROSS_BUILD_TOOLS   Tom Rini
• [U-Boot] [PATCH] fs: btrfs: fix btrfs methods return values on failure   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PULL] u-boot-usb/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PATCH] delete Kbuild "select" of long-dead SPL_DISABLE_OF_CONTROL   Tom Rini
• [U-Boot] [PATCH 1/5] net: davinci_emac: drop support for unused PHYs   Tom Rini
• [U-Boot] [PATCH 2/5] arm: davinci: remove dead code for PHYs used by DaVinci DM* boards   Tom Rini
• [U-Boot] [PATCH 3/5] nand: davinci: remove dead code for dm644x   Tom Rini
• [U-Boot] [PATCH 4/5] usb: musb_hcd: remove unnecessary ifdefs for dm* SoCs   Tom Rini
• [U-Boot] [PATCH 5/5] arm: davinci: remove leftover code for dm* SoCs   Tom Rini
• [U-Boot] [PATCH v3] Convert CONFIG_SUPPORT_EMMC_BOOT to Kconfig   Tom Rini
• [U-Boot] [PATCH v5 2/2] dlmalloc: fix malloc range at end of ram   Tom Rini
• [U-Boot] Pull request v2: u-boot-sunxi/master   Tom Rini
• [U-Boot] [PATCH 1/1] env: Exit tools when invalid CRC found   Tom Rini
• [U-Boot] Pull request for mmc sub-system for v2019.07   Tom Rini
• [U-Boot] [PULL] u-boot-mips   Tom Rini
• [U-Boot] [PATCH v5 2/2] dlmalloc: fix malloc range at end of ram   Tom Rini
• [U-Boot] ARM: omap3_logic: Enable UUID   Tom Rini
• [U-Boot] [PATCH 1/1] env: add missing newline   Tom Rini
• [U-Boot] [PATCH] Refactor IMAGE_ENABLE_VERIFY to handle builds without SPL verification   Tom Rini
• [U-Boot] [PATCH v2 1/2] arch: armv8: Provide a way to disable cache maintenance ops   Tom Rini
• [U-Boot] [PATCH v2 2/2] board: ti: am654: select SYS_DISABLE_DCACHE_OPS for arm64 build   Tom Rini
• [U-Boot] [PATCHv5 1/6] Documentation: dts: Add pl310 cache controller dts documentation   Tom Rini
• [U-Boot] [PATCHv5 2/6] ARM: pl310: Add macro's for handling tag and data latency mask   Tom Rini
• [U-Boot] [PATCHv5 3/6] dm: cache: Create a uclass for cache   Tom Rini
• [U-Boot] [PATCHv5 4/6] dm: cache: add the pl310 cache controller driver   Tom Rini
• [U-Boot] [PATCHv5 5/6] ARM: socfpga: use the pl310 driver to configure the cache   Tom Rini
• [U-Boot] [PATCHv5 6/6] configs: socfpga: add imply pl310 cache controller   Tom Rini
• [U-Boot] [PATCH v5 1/2] spl: fix linker size check off-by-one errors   Tom Rini
• [U-Boot] [PATCH v1 1/2] spl: fit: Always enable tracking of os-type if SPL_OS_BOOT is enabled   Tom Rini
• [U-Boot] [PATCH v1 2/2] configs: am335x_evm: enable SPL_FIT_IMAGE_TINY   Tom Rini
• [U-Boot] [PATCH 1/1] lib/display_options: avoid illegal memory access   Tom Rini
• [U-Boot] [PATCH v2 1/6] arm: mach-omap2: am33xx: ddr: programming of EXT_PHY_CTRL1 and EXT_PHY_CTRL1_SHADOW   Tom Rini
• [U-Boot] [PATCH v2 2/6] arm: mach-omap2: am33xx: ddr: Add 1ms delay to avoid L3 error   Tom Rini
• [U-Boot] [PATCH v2 3/6] arm: mach-omap2: am33xx: Enable HW Leveling in the rtc+ddr path   Tom Rini
• [U-Boot] [PATCH v2 4/6] arm: mach-omap2: am33xx: Disable EMIF_DEVOFF immediately before hw leveling   Tom Rini
• [U-Boot] [PATCH v2 5/6] arm: mach-omap2: am33xx: ddr: update value for ext_phy_ctrl_36   Tom Rini
• [U-Boot] [PATCH v2 6/6] board: ti: am43xx: Enable hardware leveling   Tom Rini
• [U-Boot] [PATCH v2 1/3] lib: Add xxhash support   Tom Rini
• [U-Boot] [PATCH v2 2/3] lib: add Zstandard decompression support   Tom Rini
• [U-Boot] [PATCH v2 3/3] fs: btrfs: add zstd decompression support   Tom Rini
• [U-Boot] [PATCH V2 1/2] usb: ohci: ohci-da8xx: Enable da850-ohci driver with DM support   Tom Rini
• [U-Boot] [PATCH 2/2] ARM: da850evm: Enable da850-ohci USB host controller   Tom Rini
• [U-Boot] [PATCH] cmd: pxe: add board specific PXE default path   Tom Rini
• [U-Boot] [PATCH] board: toradex: drop support.arm maintainer email   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] [ARMv8] kernel entry point   Tom Rini
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Tom Rini
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Tom Rini
• [U-Boot] [v4 PATCH] RISCV: image: Add booti support   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Tom Rini
• [U-Boot] [PATCH v5] ARM: am335x: Add phyCORE AM335x R2 support   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Tom Rini
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [EXT] Re: Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request v3: u-boot-sunxi/master   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] Pull request: u-boot-riscv/master   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190509   Tom Rini
• [U-Boot] Pull request v2: u-boot-rockchip/tags/rockchip-for-v2019.07-rc1   Tom Rini
• [U-Boot] [PATCH v2] fit signature: Add fallback of required keys   Tom Rini
• [U-Boot] [PATCH] dm: MIGRATION: Add migration plan for WDT (DM watchdog support)   Tom Rini
• [U-Boot] [PATCH] usb: ohci: ohci-da8xx: Cleanup Error handling and fix flags   Tom Rini
• [U-Boot] [PATCH] ata: ahci: fix memory leak   Tom Rini
• [U-Boot] [PATCH 1/1] test/py: avb: fix test_avb_persistent_values fail   Tom Rini
• [U-Boot] [PATCH] env: spi: Fix incorrect entry description   Tom Rini
• [U-Boot] [PATCH] Fix spelling of available.   Tom Rini
• [U-Boot] [PATCH] Make FIT support really optional   Tom Rini
• [U-Boot] [PATCH] fdt_shrink_to_minimum: do not mark fdt space reserved unconditionally   Tom Rini
• [U-Boot] [PATCH] test/py: don't use mmc_rd config for other mmc tests   Tom Rini
• [U-Boot] [PATCH v2] arm: zimage: add barebox image magic number   Tom Rini
• [U-Boot] [PATCH v2 1/3] Add fit-dtb.blob* to .gitignore.   Tom Rini
• [U-Boot] [PATCH v2 2/3] Remove fit-dtb.blob* in clean target.   Tom Rini
• [U-Boot] [PATCH v2 3/3] Set time and umask on fit-dtb.blob to ensure reproducibile builds.   Tom Rini
• [U-Boot] [PATCH 1/3] tools: k3_get_x509 cert: Add a script to generate x509 certificate for K3 devices   Tom Rini
• [U-Boot] [PATCH 2/3] arm: k3: config.mk: Use k3_gen_x509_cert.sh to generate boot images   Tom Rini
• [U-Boot] [PATCH 3/3] remoteproc: k3_system_controller: Increase rx timeout   Tom Rini
• [U-Boot] [PATCH 1/2] Convert CONFIG_NAND to Kconfig   Tom Rini
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Tom Rini
• [U-Boot] [PATCH 1/2] sysreset: select DM_GPIO instead of GPIO   Tom Rini
• [U-Boot] [PATCH 2/2] Remove whitelist entry for CONFIG_GPIO   Tom Rini
• [U-Boot] [PATCH 1/4] cmd: ubifs: Remove select for non-existent option   Tom Rini
• [U-Boot] [PATCH 2/4] mtd: ubi: Remove select for non existent option   Tom Rini
• [U-Boot] [PATCH 3/4] Remove #define CONFIG_CRC32   Tom Rini
• [U-Boot] [PATCH 4/4] Remove whitelist entry for CONFIG_CRC32   Tom Rini
• [U-Boot] [EXT] Re: [ARMv8] kernel entry point   Tom Rini
• [U-Boot] [PATCH v2] spl: add overall SPL size check   Tom Rini
• [U-Boot] [PATCH 00/11] dm: Removal of some boards due to DM_MMC deadline   Tom Rini
• [U-Boot] [PATCH 02/11] Add a simple script to remove boards   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc3   Tom Rini
• [U-Boot] [PATCH 00/11] dm: Removal of some boards due to DM_MMC deadline   Tom Rini
• [U-Boot] [PATCH 00/11] dm: Removal of some boards due to DM_MMC deadline   Tom Rini
• [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN   Tom Rini
• [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN   Tom Rini
• [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN   Tom Rini
• [U-Boot] [PATCH 4/4] test/py: test_fs: add tests for creating/deleting many files   Tom Rini
• [U-Boot] [PATCH v6] ARM: am335x: Add phyCORE AM335x R2 support   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   Tom Rini
• [U-Boot] [PATCH 01/13] mmc: k3_arasan: Allow driver to probe without PDs specified   Tom Rini
• [U-Boot] [PATCH 02/13] spl: Allow skipping clearing BSS during relocation   Tom Rini
• [U-Boot] [PATCH 03/13] spl: Make image loader infrastructure more universal   Tom Rini
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Tom Rini
• [U-Boot] [PULL] u-boot-stm32 for v2019.07​ (round 3)​   Tom Rini
• [U-Boot] Pull request: u-boot-net.git master   Tom Rini
• [U-Boot] [ANN] U-Boot v2019.07-rc2 released   Tom Rini
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Tom Rini
• [U-Boot] RSA in U-Boot   Tom Rini
• [U-Boot] RSA in U-Boot   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] please pull u-boot-samsung master   Tom Rini
• [U-Boot] [PATCH 04/13] arm: K3: Introduce System Firmware loader framework   Tom Rini
• [U-Boot] [RFC 00/11] SYSFW Loader for TI K3 family SoCs using FS Loader   Tom Rini
• [U-Boot] U-Boot, efi-x86_app and gcc-8.1?   Tom Rini
• [U-Boot] U-Boot, efi-x86_app and gcc-8.1?   Tom Rini
• [U-Boot] [PATCHv2 01/11] configs: Migrate CONFIG_FMAN_ETH and some related options to Kconfig   Tom Rini
• [U-Boot] [PATCHv2 02/11] Kconfig: Add SPI / SPI_FLASH as dependencies   Tom Rini
• [U-Boot] [PATCHv2 03/11] Kconfig: Add DEPRECATED option   Tom Rini
• [U-Boot] [PATCHv2 04/11] Makefile: Trigger a Warning if DEPRECATED is defined   Tom Rini
• [U-Boot] [PATCHv2 05/11] Makefile: Trigger a warning for legcay spi drivers   Tom Rini
• [U-Boot] [PATCHv2 06/11] spi: Kconfig: Mark MXS_SPI has DEPRECATED   Tom Rini
• [U-Boot] [PATCHv2 07/11] spi: Kconfig: Mark SH_SPI as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv2 08/11] spi: Kconfig: Mark SOFT_SPI as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv2 09/11] spi: Kconfig: Mark FSL_ESPI as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv2 10/11] spi: Kconfig: Mark LPC32XX_SSP as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv2 11/11] configs: Disable now unbuildable SPI options for boards   Tom Rini
• [U-Boot] [PATCH v3 1/5] CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case   Tom Rini
• [U-Boot] [PATCH v3 2/5] CONFIG_SYS_[DI]CACHE_OFF: remove superfluous "1"   Tom Rini
• [U-Boot] [PATCH v3 3/5] CONFIG_SYS_[DI]CACHE_OFF: remove commented lines   Tom Rini
• [U-Boot] [PATCH v3 4/5] CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig   Tom Rini
• [U-Boot] [PATCH v3 5/5] CONFIG_SPL_SYS_[DI]CACHE_OFF: add   Tom Rini
• [U-Boot] [PATCH] fit: Add support for printing more than one FPGA node name   Tom Rini
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Tom Rini
• [U-Boot] [PATCH 1/3] watchdog: bcm6345: callback start use tick instead of ms   Tom Rini
• [U-Boot] [PATCH 2/3] dt: bcm6858: watchdog should use a 50Mhz clock   Tom Rini
• [U-Boot] [PATCH 3/3] dt: bcm63158: watchdog should use a 50Mhz clock   Tom Rini
• [U-Boot] [PATCH 1/3] bcm968580xref: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT   Tom Rini
• [U-Boot] [PATCH 2/3] bcm963158: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT   Tom Rini
• [U-Boot] [PATCH 3/3] bcm968380gerg: remove CONFIG_SYS_NAND_DRIVER_ECC_LAYOUT   Tom Rini
• [U-Boot] [PATCH] ARM: mediatek: mt8516: use PSCI to reset the SoC   Tom Rini
• [U-Boot] [PATCH] spl: Set spl_image->fdt_addr pointer for full fitImage configuration   Tom Rini
• [U-Boot] [PATCH 1/1] configs: bcm963158 disable CONFIG_CMD_BOOTEFI_SELFTEST   Tom Rini
• [U-Boot] [PATCH 1/1] configs: bcm968580 disable CONFIG_CMD_BOOTEFI_SELFTEST   Tom Rini
• [U-Boot] [PATCH] ata: ahci: drop read-only ahci_ioports members   Tom Rini
• [U-Boot] [PATCH] tools: use read-only mmap in fit_check_sign   Tom Rini
• [U-Boot] [PATCH] Import include/android_bootloader_message.h from AOSP   Tom Rini
• [U-Boot] [PATCH] ARM: omap3_logic/omap35_logic: Enable GPIO in SPL   Tom Rini
• [U-Boot] [PATCH v2] Kconfig: fix FIT offset prompt text   Tom Rini
• [U-Boot] [PATCH] ARM: da850evm: Enable block cache during SPL   Tom Rini
• [U-Boot] Please pull u-boot-x86   Tom Rini
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Tom Rini
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc3 (2)   Tom Rini
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Tom Rini
• [U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] Please pull from u-boot-i2c   Tom Rini
• [U-Boot] [PULL] u-boot-mpc83xx/master   Tom Rini
• [U-Boot] Pull request: u-boot-spi/master   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] Pull request: u-boot-sunxi/master   Tom Rini
• [U-Boot] Please pull u-boot-video   Tom Rini
• [U-Boot] Pull request for mmc sub-system for v2019.07   Tom Rini
• [U-Boot] [PULL] u-boot-mpc83xx/master (take 2)   Tom Rini
• [U-Boot] Making U-Boot smaller   Tom Rini
• [U-Boot] Making U-Boot smaller   Tom Rini
• [U-Boot] Making U-Boot smaller   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] Making U-Boot smaller   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] Making U-Boot smaller   Tom Rini
• [U-Boot] [PATCHv2 1/2] configs: Rename CONFIG_IMAGE_FORMAT_LEGACY to CONFIG_LEGACY_IMAGE_FORMAT   Tom Rini
• [U-Boot] [PATCHv2 2/2] SPL: Default to disabling legacy image support when using FIT   Tom Rini
• [U-Boot] [PATCHv2 2/2] SPL: Default to disabling legacy image support when using FIT   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] Please pull u-boot-dm   Tom Rini
• [U-Boot] [PATCH v2] spl: add overall SPL size check   Tom Rini
• [U-Boot] [PATCH v2 1/5] spl: dm: disable SPI DM flash for non-DM SPL   Tom Rini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Tom Rini
• [U-Boot] [U-Boot,1/2] Convert CONFIG_NAND to Kconfig   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] Please pull u-boot-fsl-qoriq master   Tom Rini
• [U-Boot] [PULL] u-boot-stm32 for v2019.07​ (round 4)   Tom Rini
• [U-Boot] [PULL] u-boot-mips   Tom Rini
• [U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees   Tom Rini
• [U-Boot] [PATCH v5 02/13] m68k: architecture changes to support fdt   Tom Rini
• [U-Boot] [PATCH v5 03/13] m68k: add initial dts files for all m68k boards   Tom Rini
• [U-Boot] [PATCH v5 04/13] m68k: enabling long jumps on mcf54x5 SoCs   Tom Rini
• [U-Boot] [PATCH v5 05/13] configs: enable use of DT for all m68k boards   Tom Rini
• [U-Boot] [PATCH v5 06/13] drivers: spi: cf_spi: add Kconfig option   Tom Rini
• [U-Boot] [PATCH v5 07/13] drivers: spi: cf_spi: convert to driver model   Tom Rini
• [U-Boot] [PATCH v5 08/13] configs: add DM_SPI config option   Tom Rini
• [U-Boot] [PATCH v5 09/13] drivers: serial: mcfuart: add DT support   Tom Rini
• [U-Boot] [PATCH v5 10/13] configs: remove CONFIG_SYS_DSPI_XX references   Tom Rini
• [U-Boot] [PATCH v5 11/13] m68k: add OF control support to m68k   Tom Rini
• [U-Boot] [PATCH v5 12/13] m68k: move dspi bus control functions into cf_spi.c driver   Tom Rini
• [U-Boot] [PATCH v5 13/13] m68k: add dspi chip-select support   Tom Rini
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCHv2 01/11] configs: Migrate CONFIG_FMAN_ETH and some related options to Kconfig   Tom Rini
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Tom Rini
• [U-Boot] cfb_console.c: DM_VIDEO conversion questions/suggestions   Tom Rini
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Tom Rini
• [U-Boot] [PULL] u-boot-socfpga/master   Tom Rini
• [U-Boot] [PULL] u-boot-sh/master   Tom Rini
• [U-Boot] Please pull u-boot-marvell/master   Tom Rini
• [U-Boot] [ANN] U-Boot v2019.07-rc3 released   Tom Rini
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Tom Rini
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Tom Rini
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Tom Rini
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Tom Rini
• [U-Boot] [PATCH] rtc: add Microcrystal RV-8803 driver   Tom Rini
• [U-Boot] [PATCH v2 4/5] test/py: test_fs: add tests for creating/deleting many files   Tom Rini
• [U-Boot] [PATCH v2 5/5] test/py: clarify a package dependency for test_fs   Tom Rini
• [U-Boot] [PATCH] arm: davinci: remove leftover assembly   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] [PATCH 1/1] fs: fat: correct file name normalization   Tom Rini
• [U-Boot] [PATCH] fs: fat: Fix possible double free of fatbuf   Tom Rini
• [U-Boot] [PATCH] board/BuR: invalidate ${dtbaddr} before cfgscr   Tom Rini
• [U-Boot] [PATCH 1/8] calimain: remove board   Tom Rini
• [U-Boot] [PATCH 2/8] ea20: remove board   Tom Rini
• [U-Boot] [PATCH 3/8] eco5pk: remove board   Tom Rini
• [U-Boot] [PATCH 4/8] ipam390: remove board   Tom Rini
• [U-Boot] [PATCH 5/8] cm_t3517: remove board   Tom Rini
• [U-Boot] [PATCH 6/8] mt_ventoux: remove board   Tom Rini
• [U-Boot] [PATCH 7/8] twister: remove board   Tom Rini
• [U-Boot] [PATCH 8/8] mcx: remove board   Tom Rini
• [U-Boot] [PATCH] dm: arm: bcmstb: Enable driver model MMC support   Tom Rini
• [U-Boot] [PATCH] arm: davinci: remove leftover assembly   Tom Rini
• [U-Boot] [PATCH 1/1] cmd: remove unused `display` command   Tom Rini
• [U-Boot] [PATCH v2 1/5] fs: fat: write to non-cluster-aligned root directory   Tom Rini
• [U-Boot] [PATCH v2 2/5] fs: fat: flush a directory cluster properly   Tom Rini
• [U-Boot] [PATCH v2 3/5] fs: fat: allocate a new cluster for root directory of fat32   Tom Rini
• [U-Boot] [PATCH] Kconfig: Fix SPL_LOAD_FIT description   Tom Rini
• [U-Boot] Pull request, u-boot-tegra/master   Tom Rini
• [U-Boot] [PATCHv3 01/10] arm: Remove zipitz2 board   Tom Rini
• [U-Boot] [PATCHv3 02/10] Kconfig: Add SPI / SPI_FLASH as dependencies   Tom Rini
• [U-Boot] [PATCHv3 03/10] Kconfig: Add DEPRECATED option   Tom Rini
• [U-Boot] [PATCHv3 04/10] Makefile: Trigger a Warning if DEPRECATED is defined   Tom Rini
• [U-Boot] [PATCHv3 05/10] Makefile: Trigger a warning for legcay spi drivers   Tom Rini
• [U-Boot] [PATCHv3 06/10] spi: Kconfig: Mark MXS_SPI has DEPRECATED   Tom Rini
• [U-Boot] [PATCHv3 07/10] spi: Kconfig: Mark SH_SPI as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv3 08/10] spi: Kconfig: Mark SOFT_SPI as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv3 09/10] spi: Kconfig: Mark LPC32XX_SSP as DEPRECATED   Tom Rini
• [U-Boot] [PATCHv3 10/10] configs: Disable now unbuildable SPI options for boards   Tom Rini
• [U-Boot] U-Boot PXA support   Tom Rini
• [U-Boot] [PATCH v2 1/2] power: pmic: palmas/lp87565/lp873x: Remove $SPL from Makefile   Tom Rini
• [U-Boot] [RFC] Codepages for console, video, FAT file system   Tom Rini
• [U-Boot] [EXT] Re: [PATCH v2 1/5] spl: dm: disable SPI DM flash for non-DM SPL   Tom Rini
• [U-Boot] omap2 lowlevel_init.S quirk / question   Tom Rini
• [U-Boot] [PATCH] arm: davinci: remove leftover assembly   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Tom Rini
• [U-Boot] [PULL u-boot] Please pull u-boot-amlogic-20190531   Tom Rini
• [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc3   Tom Rini
• [U-Boot] [RFC PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs   Maxime Ripard
• [U-Boot] [RFC PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs   Maxime Ripard
• [U-Boot] [linux-sunxi] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB   Maxime Ripard
• [U-Boot] [PATCH] sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig   Maxime Ripard
• [U-Boot] [PATCH 2/2] sunxi: Pine64: DTS: enable USB PHY 0 for HCI0   Peter Robinson
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   Peter Robinson
• [U-Boot] [PATCH v4 2/2] net: eth-uclass: Support device tree MAC addresses   Peter Robinson
• [U-Boot] [PATCH v2 3/4] watchdog: stm32mp: Add watchdog driver   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 01/15] arm: mvebu: turris_omnia: remove redundant code   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 02/15] arm: mvebu: turris_omnia: add XHCI to defconfig   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 03/15] arm: mvebu: turris_omnia: use AHCI and SATA driver model   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 04/15] arm: mvebu: turris_omnia: remove legacy macros from board header   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 05/15] arm: mvebu: turris_omnia: move I2C dependencies to Kconfig   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 06/15] arm: mvebu: turris_omnia: add SCSI as boot target   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 07/15] arm: mvebu: turris_omnia: refactor I2C accessing code   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 08/15] arm: mvebu: turris_omnia: fix checkpatch warnings   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 09/15] arm: mvebu: turris_omnia: move ATSHA204A from defconfig to Kconfig   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 10/15] arm: mvebu: turris_omnia: refactor more code   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 11/15] arm: mvebu: turris_omnia: print board info as Turris Mox   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 12/15] arm: mvebu: turris_*: remove watchdog include   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 13/15] arm: mvebu: turris_omnia: fix regdomain env var setting   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 14/15] arm: mvebu: turris_omnia: add RESET button handling   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2.1 15/15] i2c: mvtwsi: fix reading status register after interrupt   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2.1 15/15] i2c: mvtwsi: fix reading status register after interrupt   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 14/15] arm: mvebu: turris_omnia: add RESET button handling   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v2 14/15] arm: mvebu: turris_omnia: add RESET button handling   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v3 14/17] arm: mvebu: turris_omnia: add RESET button handling   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v3 16/17] arm: mvebu: turris_omnia: add GPIO support to defconfig   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v3 17/17] arm: mvebu: turris_omnia: enable defconfig options needed by vendor   Stefan Roese
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Stefan Roese
• [U-Boot] [PATCH 1/3] arm: mvebu: clearfog: Enable BLK and DM support   Stefan Roese
• [U-Boot] [PATCH 2/3] arm: mvebu: db-88f6720: Enable CONFIG_BLK   Stefan Roese
• [U-Boot] [PATCH 3/3] arm: mvebu: db-88f6820-gp: Enabel BLK and DM support   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell v3 00/17] Fixes for Turris Omnia   Stefan Roese
• [U-Boot] [PATCH] kwbimage: fixing the issue with proper return code checking   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH 1/3] watchdog: bcm6345: callback start use tick instead of ms   Stefan Roese
• [U-Boot] [PATCH 2/3] dt: bcm6858: watchdog should use a 50Mhz clock   Stefan Roese
• [U-Boot] [PATCH 3/3] dt: bcm63158: watchdog should use a 50Mhz clock   Stefan Roese
• [U-Boot] [PATCH 3/3] dt: bcm63158: watchdog should use a 50Mhz clock   Stefan Roese
• [U-Boot] [PATCH 1/1] arm: mvebu: Add CRS305-1G-4S board   Stefan Roese
• [U-Boot] [PATCH 1/1 v3] arm: mvebu: Add CRS305-1G-4S board   Stefan Roese
• [U-Boot] [PATCH 01/12] spl: Fix typo in kernel doc   Stefan Roese
• [U-Boot] [PATCH 02/12] arm: spear: Drop useless board_init_r call   Stefan Roese
• [U-Boot] [PATCH 03/12] arm: spear: Call the SPL 'SPL', not 'Xloader'   Stefan Roese
• [U-Boot] [PATCH 04/12] arm: spear: Drop false comment   Stefan Roese
• [U-Boot] [PATCH 05/12] arm: spear: Fix the main comment in start.S   Stefan Roese
• [U-Boot] [PATCH 06/12] arm: spear: Purely cosmetic changes in start.S   Stefan Roese
• [U-Boot] [PATCH 07/12] arm: spear: Use PUSH/POP mnemonics when relevant   Stefan Roese
• [U-Boot] [PATCH 08/12] arm: spear: Reference the link register with LR instead of R14   Stefan Roese
• [U-Boot] [PATCH 09/12] arm: spear: Simplify start.S organization   Stefan Roese
• [U-Boot] [PATCH 10/12] arm: spear: Support returning to BootROM   Stefan Roese
• [U-Boot] [PATCH 11/12] arm: spear: Do not link the _main branch   Stefan Roese
• [U-Boot] [PATCH 12/12] arm: spear: Return to BootROM if failing to boot from the main device   Stefan Roese
• [U-Boot] [PATCH 00/12] Enable returning back to BootROM from spear SPL   Stefan Roese
• [U-Boot] [PATCH 1/1 v4] arm: mvebu: Add CRS305-1G-4S board   Stefan Roese
• [U-Boot] [PATCH] mips: mt7688: gardena-smart-gateway-mt7688: Enable CMD_WDT   Stefan Roese
• [U-Boot] [PATCH] arm: at91: gardena-smart-gateway-at91sam: Enable CMD_WDT   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: clearfog: enable DM MMC   Stefan Roese
• [U-Boot] [PATCH] net: mvpp2: support setting hardware addresses from ethernet core   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: clearfog: add MMC to SPL DT   Stefan Roese
• [U-Boot] [PATCH] dm: MIGRATION: Add migration plan for WDT (DM watchdog support)   Stefan Roese
• [U-Boot] [PATCH 1/3] arm: mvebu: clearfog: Enable BLK and DM support   Stefan Roese
• [U-Boot] [PATCH 2/3] arm: mvebu: db-88f6720: Enable CONFIG_BLK   Stefan Roese
• [U-Boot] [PATCH 3/3] arm: mvebu: db-88f6820-gp: Enabel BLK and DM support   Stefan Roese
• [U-Boot] [PATCH 1/1 v4] arm: mvebu: Add CRS305-1G-4S board   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: clearfog: add MMC to SPL DT   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell 6/6] arm: mvebu: turris_omnia: call pci_init from board init code   Stefan Roese
• [U-Boot] [PATCH u-boot-marvell 0/6] More fixes for Turris Omnia   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"   Stefan Roese
• [U-Boot] [PATCH] watchdog: ulp_wdog: Remove unused ULP watchdog driver and its references   Stefan Roese
• [U-Boot] [PATCH] watchdog: bcm2835_wdt: Remove unused BCM283x watchdog driver and its references   Stefan Roese
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: ignore the local device   Stefan Roese
• [U-Boot] [PATCH] watchdog: ulp_wdog: Remove unused ULP watchdog driver and its references   Stefan Roese
• [U-Boot] [PATCH 03/11] solidrun: Fix soldrun typo   Stefan Roese
• [U-Boot] [PATCH 6/8] ARM: imx: dh-imx6: Convert SATA support to DM   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"   Stefan Roese
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Stefan Roese
• [U-Boot] [PATCH 1/3] board_r: move initr_serial to be called before initr_watchdog   Stefan Roese
• [U-Boot] [PATCH 2/3] watchdog: mtk_wdt: fix timeout calculation   Stefan Roese
• [U-Boot] [PATCH 3/3] arm: mediatek: remove arch_misc_init   Stefan Roese
• [U-Boot] [PATCH] dm: arm: bcmstb: Enable driver model MMC support   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: helios4: Enable CONFIG_BLK and CONFIG_DM_MMC   Stefan Roese
• [U-Boot] [PATCH] arm: mvebu: armada-370-xp.dtsi: Add "u-boot, dm-pre-reloc" to "internal-regs"   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [PATCH 1/2] mips: mt76xx: Implement new d-cache fix in last_stage_init()   Stefan Roese
• [U-Boot] [PATCH 2/2] mips: mt76xx: gardena-smart-gateway: Enable CONFIG_USE_PREBOOT   Stefan Roese
• [U-Boot] [PATCH u-boot] pci: ensure enumeration of all devices in pci_init   Stefan Roese
• [U-Boot] [PATCH 1/4] ata: fsl_ahci: Add sata DM support for Freescale powerpc socs   Stefan Roese
• [U-Boot] [PATCH 1/2] mips: mt76xx: Implement new d-cache fix in last_stage_init()   Stefan Roese
• [U-Boot] [PATCH 1/2 v2] mips: mt76xx: Remove cache workaround and select SYS_MALLOC_CLEAR_ON_INIT   Stefan Roese
• [U-Boot] [PATCH 2/2 v2] mips: mt76xx: gardena-smart-gateway: Enable CONFIG_USE_PREBOOT   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 1/7] arm: mvebu: turris_omnia: set default ethernet adapter   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 2/7] arm: mvebu: turris_omnia: fix adapters MAC addresses   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 3/7] arm: mvebu: turris_omnia: change environment address in SPI flash   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 4/7] arm: mvebu: turris_omnia: remove unneeded macro from board config   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 5/7] arm: mvebu: turris_omnia: prefer SCSI booting before USB   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 6/7] arm: mvebu: turris_omnia: call pci_init from board init code   Stefan Roese
• [U-Boot] [PATCH v2 u-boot-marvell 7/7] arm: mvebu: turris_omnia: fix rescue mode bootcmd bootargs setting   Stefan Roese
• [U-Boot] Please pull u-boot-marvell/master   Stefan Roese
• [U-Boot] [ANN] U-Boot v2019.07-rc3 released   Stefan Roese
• [U-Boot] [PATCH] mips: mt76xx: Implement new d-cache fix in last_stage_init()   Stefan Roese
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Eugeniu Rosca
• [U-Boot] [PATCH] core: ofnode: Fix ASAN-reported stack-buffer-overflow in of_get_address   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/4] Misc EFI/GPT/UUID fixes   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/4] disk: efi: Fix memory leak on 'gpt guid'   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/4] disk: efi: Fix memory leak on 'gpt verify'   Eugeniu Rosca
• [U-Boot] [PATCH v2 3/4] cmd: gpt: fix and tidy up help message   Eugeniu Rosca
• [U-Boot] [PATCH v2 4/4] lib: uuid: Fix unseeded PRNG on RANDOM_UUID=y   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/4] disk: efi: Fix memory leak on 'gpt guid'   Eugeniu Rosca
• [U-Boot] Automated/remote flashing of R-Car3   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/4] disk: efi: Fix memory leak on 'gpt guid'   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Eugeniu Rosca
• [U-Boot] Automated/remote flashing of R-Car3   Eugeniu Rosca
• [U-Boot] Automated/remote flashing of R-Car3   Eugeniu Rosca
• [U-Boot] Automated/remote flashing of R-Car3   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Eugeniu Rosca
• [U-Boot] [PATCH 1/2] include: android_bl_msg.h: Initial import   Eugeniu Rosca
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Eugeniu Rosca
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Eugeniu Rosca
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] lib: uuid: Improve randomness of uuid values on RANDOM_UUID=y   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v2 1/2] include: android_bootloader_message.h: Minimize the diff to AOSP   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] Making U-Boot smaller   Eugeniu Rosca
• [U-Boot] Making U-Boot smaller   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/3] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v3 1/3] include: android_bootloader_message.h: Minimize the diff to AOSP   Eugeniu Rosca
• [U-Boot] [PATCH v3 2/3] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v3 3/3] doc: relocate/rename Android README and add BCB overview   Eugeniu Rosca
• [U-Boot] [PATCH v2 2/2] cmd: Add 'bcb' command to read/modify/write BCB fields   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] Making U-Boot smaller   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/2] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v3 0/3] Add 'bcb' command to read/modify/write Android BCB   Eugeniu Rosca
• [U-Boot] [PATCH v2 0/6] - Add Ethernet support for stm32mpu   Christophe Roullier
• [U-Boot] [PATCH v2 1/6] stm32mp1: clk: use the correct identifier for ethck   Christophe Roullier
• [U-Boot] [PATCH v2 2/6] board: stm32mp1: Add board_interface_eth_init   Christophe Roullier
• [U-Boot] [PATCH v2 3/6] net: dwc_eth_qos: add Ethernet stm32mp1 support   Christophe Roullier
• [U-Boot] [PATCH v2 4/6] ARM: dts: stm32: Add Ethernet support on stm32mp1   Christophe Roullier
• [U-Boot] [PATCH v2 5/6] stm32mp1: Add Ethernet support for stm32mp1 board   Christophe Roullier
• [U-Boot] [PATCH v2 6/6] configs: stm32mp15: Enable Ethernet feature   Christophe Roullier
• [U-Boot] [PATCH 0/3] Add Avenger96 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 0/3] Add Avenger96 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 1/3] arm: dts: stm32mp157: Add missing pinctrl definitions   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 2/3] board: stm32mp1: Add Avenger96 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH v2 3/3] arm: mach-stm32mp: Add newline to the MAC error message   Manivannan Sadhasivam
• [U-Boot] [PATCH 2/3] board: stm32mp1: Add Avenger96 board support   Manivannan Sadhasivam
• [U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL   Manivannan Sadhasivam
• [U-Boot] [PATCH 2/2] arm: dts: ficus: Enable booting from eMMC when using SPL   Manivannan Sadhasivam
• [U-Boot] U-Boot PXA support   Alex Sadovsky
• [U-Boot] U-Boot PXA support   Alex Sadovsky
• [U-Boot] U-Boot PXA support   Alex Sadovsky
• [U-Boot] [PATCH 1/5] mtd: spi-nor: fix page program issue when using spi-mem driver   Shyam Saini
• [U-Boot] [PATCH 1/2] configs: Add SPL Kconfig options   Shyam Saini
• [U-Boot] [PATCH 2/2] Kconfig: Add BUILD_TARGET for i.MX6 images   Shyam Saini
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Shyam Saini
• [U-Boot] [PATCH 1/2] logos: Add the TechNexion's logo   Otavio Salvador
• [U-Boot] [PATCH 2/2] pico-imx6ul: Add DWARF baseboard support   Otavio Salvador
• [U-Boot] [PATCH] board/BuR/brsmarc1: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/brppt2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/brsmarc1: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/brppt2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/brsmarc1: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v3] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR/common: fix detection for PSC/STM resetcontroller   Hannes Schmelzer
• [U-Boot] [PATCH] board/BuR: invalidate ${dtbaddr} before cfgscr   Hannes Schmelzer
• [U-Boot] [PATCH v3] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v3] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH v4] board/BuR/zynq/brsmarc2: initial commit   Hannes Schmelzer
• [U-Boot] [PATCH 2/2] i2c: mxc_i2c: Fix read and read->write xfers in DM mode   Heiko Schocher
• [U-Boot] [PATCH u-boot-marvell v2.1 15/15] i2c: mvtwsi: fix reading status register after interrupt   Heiko Schocher
• [U-Boot] [PATCH] i2c: mxc: Hide kconfig based control in DM_I2C mode   Heiko Schocher
• [U-Boot] [PATCH v3] ARM: am335x: Add phyCORE AM335x R2 support   Heiko Schocher
• [U-Boot] [PATCH] i2c: mxc: Hide kconfig based control in DM_I2C mode   Heiko Schocher
• [U-Boot] [PATCH] simple-bus: add DM_FLAG_PRE_RELOC flag to simple-bus driver   Heiko Schocher
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Heiko Schocher
• [U-Boot] [PATCH 1/6] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND   Heiko Schocher
• [U-Boot] [PATCH 01/18] i2c: omap24xx_i2c: Adapt driver to support K3 devices   Heiko Schocher
• [U-Boot] [PATCH 02/18] arm: omap_i2c: Remove unwanted header file inclusion   Heiko Schocher
• [U-Boot] [PATCH 0/2] mxc_spi: DM improvements   Heiko Schocher
• [U-Boot] [PATCH 1/2] spi: imx: remove doubled pointer from mxc_spi_probe   Heiko Schocher
• [U-Boot] [PATCH 2/2] spi: imx: work with cs greater 0   Heiko Schocher
• [U-Boot] The CONFIG_DM_I2C_COMPAT option is not available   Heiko Schocher
• [U-Boot] [PATCH 4/8] ipam390: remove board   Heiko Schocher
• [U-Boot] Please pull from u-boot-i2c   Heiko Schocher
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Heiko Schocher
• [U-Boot] [EXT] Re: [PATCH] i2c: pcf2127: fix bug that read wrong time   Heiko Schocher
• [U-Boot] [PATCH 1/7] armv8: lx2160a: The lx2160a platform supports the I2C driver model.   Heiko Schocher
• [U-Boot] [PATCH 3/7] armv8: dts: fsl-lx2160a: add i2c controller and gpio DT nodes   Heiko Schocher
• [U-Boot] [PATCH 4/7] armv8: lx2160ardb : Add pcf2127 node   Heiko Schocher
• [U-Boot] [PATCH 5/7] drivers: i2c: mxc: Solve the compiler error when using i2c dm mode   Heiko Schocher
• [U-Boot] [PATCH 6/7] gpio: do not include <asm/arch/gpio.h> on ARCH_LX2160A   Heiko Schocher
• [U-Boot] [PATCH 7/7] armv8: lx2160ardb : Add slave nodes under the i2c0 controller   Heiko Schocher
• [U-Boot] [PATCH v2 0/2] mxc_spi: DM improvements   Heiko Schocher
• [U-Boot] [PATCH v2 1/2] spi: imx: remove doubled pointer from mxc_spi_probe   Heiko Schocher
• [U-Boot] [PATCH v2 2/2] spi: imx: work with cs greater 0   Heiko Schocher
• [U-Boot] [PATCH] arm, imx, Makefile: support CONFIG_MULTI_DTB_FIT   Heiko Schocher
• [U-Boot] [PATCH] rtc: ds1307: add support for m41t11   Heiko Schocher
• [U-Boot] [PATCH] cmd/led: check subcommand "list" instead "l"   Heiko Schocher
• [U-Boot] [PATCH] video, simple_panel: add lg,lb070wv8 display   Heiko Schocher
• [U-Boot] [PATCH] gpio: add gpio-hog support   Heiko Schocher
• [U-Boot] [PATCH] gpio: add gpio-hog support   Heiko Schocher
• [U-Boot] [PATCH 1/4] davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs   Heiko Schocher
• [U-Boot] [PATCH 2/4] sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs   Heiko Schocher
• [U-Boot] [PATCH 3/4] i2c: remove i2c driver-model compatibility layer   Heiko Schocher
• [U-Boot] [PATCH 4/4] omapl138_lcdk_defconfig: don't build support for SPI   Heiko Schocher
• [U-Boot] [PATCH v2] gpio: add gpio-hog support   Heiko Schocher
• [U-Boot] [PATCH v2] gpio: add gpio-hog support   Heiko Schocher
• [U-Boot] [PATCH v2] gpio: add gpio-hog support   Heiko Schocher
• [U-Boot] [PATCH] arm, imx, Makefile: support CONFIG_MULTI_DTB_FIT   Heiko Schocher
• [U-Boot] [PATCH 0/2] pwm, imx: add Kconfig and DM support   Heiko Schocher
• [U-Boot] [PATCH 1/2] pwm: imx: add Kconfig support   Heiko Schocher
• [U-Boot] [PATCH 2/2] pwm: imx: add DM_PWM support   Heiko Schocher
• [U-Boot] [PATCH v2] arm, imx, Makefile: fix u-boot-dtb.imx build in CONFIG_MULTI_DTB_FIT case   Heiko Schocher
• [U-Boot] [PATCH v3] gpio: add gpio-hog support   Heiko Schocher
• [U-Boot] [PATCH 1/1] efi_add_handle() - description of efi_add_handle()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: description of efi_add_handle()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: test exit_data   Heinrich Schuchardt
• [U-Boot] [PATCH v2 28/50] x86: sysreset: Separate out the EFI code   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/4] lib: uuid: Fix unseeded PRNG on RANDOM_UUID=y   Heinrich Schuchardt
• [U-Boot] [BUG] Linux kernel oops when booting from U-Boot via GRUB-EFI on qemu-x86_defconfig   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: allowable event types in CreateEventEx()   Heinrich Schuchardt
• [U-Boot] [PATCH 0/4] efi_loader implent unloading of images   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Heinrich Schuchardt
• [U-Boot] [PATCH 2/4] efi_loader: move efi_unload_image() down in source   Heinrich Schuchardt
• [U-Boot] [PATCH 3/4] efi_loader: implement UnloadImage()   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] efi_loader: unload applications upon Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: correct parameter check in LocateHandle()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_selftest: remove redundant function efi_st_memcmp()   Heinrich Schuchardt
• [U-Boot] [PATCH 0/3] implement RegisterProtocolNotify()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] efi_loader: EVT_NOTIFY_SIGNAL events   Heinrich Schuchardt
• [U-Boot] [PATCH 2/3] efi_loader: implement RegisterProtocolNotify()   Heinrich Schuchardt
• [U-Boot] [PATCH 3/3] efi_selftest: unit test for RegisterProtocolNotify()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: CloseProtocol() requires valid agent handle   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: use EFI_PRINT instead of debug   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: HandleProtocol parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: LoadImage() parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: allowable event types in CreateEventEx()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: LoadImage() parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: signature of ExitBootServices()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: LoadImage() parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: LoadImage() parameter checks   Heinrich Schuchardt
• [U-Boot] [v4 PATCH] RISCV: image: Add booti support   Heinrich Schuchardt
• [U-Boot] [v4 PATCH] RISCV: image: Add booti support   Heinrich Schuchardt
• [U-Boot] [PATCH v3 0/2] efi_loader: LoadImage() parameter checks   Heinrich Schuchardt
• [U-Boot] [PATCH v3 1/2] efi_loader: LoadImage() check parent image   Heinrich Schuchardt
• [U-Boot] [PATCH v3 2/2] efi_loader: LoadImage() check source size   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] efi_loader: unload applications upon Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] efi_loader: unload applications upon Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] efi_loader: mark started images   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: unload applications upon Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: optional data in load options are binary   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: unload applications upon Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: unload applications upon Exit()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] lib: charset: correct utf8_utf16_strnlen() description   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] MAINTAINERS: assign include/charset.h   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: observe CONFIG_EFI_LOADER_HII   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: make Unicode collation protocol customizable   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: format Kconfig   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: make Unicode collation protocol customizable   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] configs: bcm963158 disable CONFIG_CMD_BOOTEFI_SELFTEST   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] configs: bcm968580 disable CONFIG_CMD_BOOTEFI_SELFTEST   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc2 (2)   Heinrich Schuchardt
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: fix typo in efi_locate_handle() comment   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: LocateDevicePath() incorrect parameter check   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: superfluous check in efi_remove_protocol()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: error code in UninstallProtocolInterface()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: check memory address before freeing   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: out of resource in AllocatePages()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: AllocateAdress error handling   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: simplify efi_allocate_pages()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 0/5] efi_loader: make more protocols customizable   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/5] efi_loader: observe CONFIG_EFI_LOADER_HII   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/5] efi_loader: format Kconfig   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/5] efi_loader: reword the EFI_LOADER config option   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/5] efi_loader: make Unicode collation protocol customizable   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/5] efi_loader: make device path to text protocol customizable   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: infinite recursion notifying events   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: ACPI device node to text   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fs: fat: correct file name normalization   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: deduplicate code in cmd/bootefi.c   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: comments for efi_install_fdt()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: out of resources in AllocatePages()   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc3   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] flash-kernel: Marvell 8040 MACCHIATOBin Double-shot   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: env: print a message when setting UEFI variable failed   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: bootmgr: print a message when loading from BootNext failed   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: variable: attributes may not be changed if a variable exists   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: bootmgr: print a message when loading from BootNext failed   Heinrich Schuchardt
• [U-Boot] [PATCH] cmd: env: print a message when setting UEFI variable failed   Heinrich Schuchardt
• [U-Boot] [PATCH 1/4] fs: fat: write to non-cluster-aligned root directory   Heinrich Schuchardt
• [U-Boot] [PATCH 2/4] fs: fat: flush a directory cluster properly   Heinrich Schuchardt
• [U-Boot] [PATCH 3/4] fs: fat: allocate a new cluster for root directory of fat32   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: variable: attributes may not be changed if a variable exists   Heinrich Schuchardt
• [U-Boot] [PATCH 4/4] test/py: test_fs: add tests for creating/deleting many files   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: variable: attributes may not be changed if a variable exists   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: GetVariable set attributes for EFI_BUFFER_TOO_SMALL   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: parameter checks simple network protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: merge adjacent sprintf()   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: rename Unicode collation protocol 2 variables   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: implement deprecated Unicode collation protocol   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: check device path in InstallMultipleProtocolInterfaces   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: parameter checks CalculateCrc32()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL.SetState() correct parameter   Heinrich Schuchardt
• [U-Boot] [PATCH] efi_loader: parameter check OutputString   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: return values of GetTime()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: implement SetTime   Heinrich Schuchardt
• [U-Boot] Pull request for UEFI sub-system for v2019.07-rc3 (2)   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] tools/logos: add text to U-Boot logo   Heinrich Schuchardt
• [U-Boot] [PATCH 0/4] fs: fat: fixes for write under root directory   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: check device path in InstallMultipleProtocolInterfaces   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] cmd: remove unused `display` command   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: implement SetTime   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: correct device path check   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: comments for structs   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] fs: fat: correct file name normalization   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   Heinrich Schuchardt
• [U-Boot] EFI_SPECIFICATION_VERSION   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: DEL is an illegal file name character   Heinrich Schuchardt
• [U-Boot] efi_loader: efi_runtime_detach()?   Heinrich Schuchardt
• [U-Boot] [PATCH v2 2/3] efi_loader: variable: return error for APPEND_WRITE   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/3] efi: selftest: APPEND_WRITE is not supported   Heinrich Schuchardt
• [U-Boot] [PATCH v2 3/3] efi_loader: variable: attributes may not be changed if a variable exists   Heinrich Schuchardt
• [U-Boot] [PATCH v2] cmd: env: print a message when setting UEFI variable failed   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   Heinrich Schuchardt
• [U-Boot] [PATCH v2] cmd: env: print a message when setting UEFI variable failed   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: correct notification of protocol installation   Heinrich Schuchardt
• [U-Boot] [PATCH v3] cmd: env: print a message when setting UEFI variable failed   Heinrich Schuchardt
• [U-Boot] [PATCH v2] efi_loader: bootmgr: print a message when loading from BootNext failed   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: bootmgr: print a message when loading from BootNext failed   Heinrich Schuchardt
• [U-Boot] [PATCH v2 4/5] test/py: test_fs: add tests for creating/deleting many files   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/5] test/py: clarify a package dependency for test_fs   Heinrich Schuchardt
• [U-Boot] [PATCH v2 5/5] test/py: clarify a package dependency for test_fs   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: factor our efi_check_register_notify_event()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: bootmgr: print a message when loading from BootNext failed   Heinrich Schuchardt
• [U-Boot] [PATCH v4 1/1] efi_loader: bootmgr: print a message when loading from BootNext failed   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: registration key in LocateProtocol()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: factor our efi_check_register_notify_event()   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: registration key in LocateProtocol()   Heinrich Schuchardt
• [U-Boot] [RFC] Codepages for console, video, FAT file system   Heinrich Schuchardt
• [U-Boot] [PATCH 0/2] efi_loader: correct OpenProtocol()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/2] efi_loader: correct OpenProtocol()   Heinrich Schuchardt
• [U-Boot] [PATCH 2/2] efi_loader: avoid crash in OpenProtocol()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/1] efi_loader: correct UninstallProtocolInterface()   Heinrich Schuchardt
• [U-Boot] [PATCH] lib: Makefile: build fdtdec_common.c when OF_LIBFDT selected   Heinrich Schuchardt
• [U-Boot] [PATCH 0/3] efi_loader: parameter checks in SetTime()   Heinrich Schuchardt
• [U-Boot] [PATCH 1/3] rtc: export rtc_month_days()   Heinrich Schuchardt
• [U-Boot] [PATCH 2/3] efi_loader: check time in SetTime()   Heinrich Schuchardt
• [U-Boot] [PATCH 3/3] efi_loader: export efi_set_time()   Heinrich Schuchardt
• [U-Boot] [PATCH v2 1/1] efi_loader: factor out efi_check_register_notify_event()   Heinrich Schuchardt
• [U-Boot] DM for ci_udc   Sven Schwermer
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Sven Schwermer
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Sven Schwermer
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Sven Schwermer
• [U-Boot] [PATCH] regulator: Allow autosetting fixed regulators   Sven Schwermer
• [U-Boot] fsl_esdhc: GPIO regulator as VQMMC supply?   Sven Schwermer
• [U-Boot] [PATCH 0/3] Update Luton network driver   Daniel Schwierzeck
• [U-Boot] [PATCH, RESEND] mips: rename mach-mt7620 to mach-mtmips   Daniel Schwierzeck
• [U-Boot] [PULL] u-boot-mips   Daniel Schwierzeck
• [U-Boot] [PATCH 1/2] mips: mt76xx: Implement new d-cache fix in last_stage_init()   Daniel Schwierzeck
• [U-Boot] [PATCH 1/2 v2] mips: mt76xx: Remove cache workaround and select SYS_MALLOC_CLEAR_ON_INIT   Daniel Schwierzeck
• [U-Boot] [PATCH 2/2 v2] mips: mt76xx: gardena-smart-gateway: Enable CONFIG_USE_PREBOOT   Daniel Schwierzeck
• [U-Boot] [PATCH] mips: mt7688: gardena-smart-gateway-mt7688: Enable CMD_WDT   Daniel Schwierzeck
• [U-Boot] [PULL] u-boot-mips   Daniel Schwierzeck
• [U-Boot] [PATCH v2 7/9] configs: migrate ubispl boards to KConfig   Enric Balletbo Serra
• [U-Boot] [PATCH] armv8: ls1046afrwy: Add support for LS1046AFRWY platform   Vabhav Sharma
• [U-Boot] [PATCH] mtd: spi: add spi flash id mt25qu512a   Vabhav Sharma
• [U-Boot] [PATCH v2] mtd: spi: add spi flash id mt25qu512a   Vabhav Sharma
• [U-Boot] [PATCH v1] armv8: lx2160: Drop useless CONFIG_CMDLINE_EDITING from config.h   Andy Shevchenko
• [U-Boot] [PATCH] arm: mvebu: clearfog: enable DM MMC   Baruch Siach
• [U-Boot] [PATCH] arm: mvebu: clearfog: add MMC to SPL DT   Baruch Siach
• [U-Boot] [PATCH 0/9] arm: mvebu: clearfog: support boot from SATA disk   Baruch Siach
• [U-Boot] [PATCH 1/9] spl: sata: add default partition and image name   Baruch Siach
• [U-Boot] [PATCH 2/9] spl: sata: fix build with DM_SCSI   Baruch Siach
• [U-Boot] [PATCH 3/9] spl: sata: don't force FS_FAT support   Baruch Siach
• [U-Boot] [PATCH 4/9] spl: sata: support U-Boot load from raw sata disk   Baruch Siach
• [U-Boot] [PATCH 5/9] arm: mvebu: fix ahci mbus config in SPL   Baruch Siach
• [U-Boot] [PATCH 6/9] arm: mvebu: add support for boot from SATA   Baruch Siach
• [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA   Baruch Siach
• [U-Boot] [PATCH 7/9] ARM: dts: clearfog: enable SATA in SPL   Baruch Siach
• [U-Boot] [PATCH 7/9] arm: mvebu: clearfog: enable SATA in SPL   Baruch Siach
• [U-Boot] [PATCH 8/9] arm: mvebu: clearfog: set U-Boot offset for SATA boot   Baruch Siach
• [U-Boot] [PATCH 9/9] arm: mvebu: clearfog: document boot from SATA   Baruch Siach
• [U-Boot] [PATCH 6/9] ARM: mvebu: add support for boot from SATA   Baruch Siach
• [U-Boot] [PATCH 2/2] ARM: defconfig: add Raspberry Pi 3 Model B+   Luis Alfredo da Silva
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCH v3 2/2] arm64: zynqmp: add tool to convert PMU config object .c to binary   Michal Simek
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [PATCH v3 2/2] arm64: zynqmp: add tool to convert PMU config object .c to binary   Michal Simek
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [PATCH v2] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCH v3 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Michal Simek
• [U-Boot] [PATCH] arm64: zynqmp: Rename zc1275 to zcu1275   Michal Simek
• [U-Boot] [PATCH v4 1/2] arm64: zynqmp: spl: install a PMU firmware config object at runtime   Michal Simek
• [U-Boot] [PATCH v4 2/2] arm64: zynqmp: add tool to convert PMU config object .c to binary   Michal Simek
• [U-Boot] [PATCH 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Michal Simek
• [U-Boot] [PATCH 2/3] arm64: zynqmp: add tool to minimize psu_init_gpl.c files   Michal Simek
• [U-Boot] [PATCH 1/3] arm64: zynqmp: xil_io.h: declare functions as static   Michal Simek
• [U-Boot] [PATCH v5 0/2] arm64: zynqmp: pass a PMUFW config object   Michal Simek
• [U-Boot] [PATCH 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Michal Simek
• [U-Boot] [PATCH PATCH v3 01/12] spl: fit: Add support for applying DT overlay   Michal Simek
• [U-Boot] [PATCH] mmc: implement SDHCI card detect   Michal Simek
• [U-Boot] [PATCH RESEND 1/1] Add ps7_init_gpl.c for Z-turn board   Michal Simek
• [U-Boot] [PATCH v3] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCH] gpio: add gpio-hog support   Michal Simek
• [U-Boot] [PATCH] gpio: add gpio-hog support   Michal Simek
• [U-Boot] [PATCH v2] gpio: add gpio-hog support   Michal Simek
• [U-Boot] [PATCH v2] gpio: add gpio-hog support   Michal Simek
• [U-Boot] [PATCH v2] gpio: add gpio-hog support   Michal Simek
• [U-Boot] [PATCH RESEND 1/1] Add ps7_init_gpl.c for Z-turn board   Michal Simek
• [U-Boot] [PATCH v2 1/3] arm64: zynqmp: xil_io.h: declare functions as static   Michal Simek
• [U-Boot] [PATCH v2 2/3] arm64: zynqmp: add tool to minimize psu_init_gpl.c files   Michal Simek
• [U-Boot] [PATCH v2 3/3] arm64: zynqmp: add support for Avnet UltraZed-EV Starter Kit   Michal Simek
• [U-Boot] [PATCH] cmd/fpga.c: correct typo, capitalize "Xilinx"   Michal Simek
• [U-Boot] [PATCH v3] board/BuR/zynq/brsmarc2: initial commit   Michal Simek
• [U-Boot] [PATCHv2 1/1] Basic (PS-only) configuration based on Vivado board files by Sergiusz Bazanski <sergius at q3k.org>   Michal Simek
• [U-Boot] [PATCH] mtd: spi-nor-ids: Add micron mt35xu512g flash ID   Kuldeep Singh
• [U-Boot] [PATCH] configs: ls1088aqds: Enable config to write aligned data to TxFIFO   Kuldeep Singh
• [U-Boot] [PATCH] mtd: spi-nor-ids: Add SPI_NOR_4B_OPCODES to micron mt35xu512g flash ID   Kuldeep Singh
• [U-Boot] [PATCH v2 10/19] spi: mpc8xxx: Simplify logic a bit   Mario Six
• [U-Boot] [PATCH v2 10/19] spi: mpc8xxx: Simplify logic a bit   Mario Six
• [U-Boot] [PATCH 1/1] pci: pci_mvebu: fix bus enumeration if some buses have empty slots   Mario Six
• [U-Boot] [PULL] u-boot-mpc83xx/master   Mario Six
• [U-Boot] [PATCH] controlcenterdc: Update config   Mario Six
• [U-Boot] [PATCH 16/16] mpc83xx: Add gazerbeam board   Mario Six
• [U-Boot] [PULL] u-boot-mpc83xx/master   Mario Six
• [U-Boot] [PULL] u-boot-mpc83xx/master (take 2)   Mario Six
• [U-Boot] [PATCH 10/11] evb-ast2500: Enable CONFIG_DM_MMC   Maxim Sloyko
• [U-Boot] [PATCH] sun50i: a64: Fix broken A64-Teres-I board config   Jonas Smedegaard
• [U-Boot] sun50i: a64: Beelink GS1 box is likely broken   Jonas Smedegaard
• [U-Boot] [PATCH] sun50i: a64: Fix broken A64-Teres-I board config   Jonas Smedegaard
• [U-Boot] [PATCH v2] sun50i: a64: Fix broken A64-Teres-I board config   Jonas Smedegaard
• [U-Boot] [PATCH] sun50i: a64: Fix broken A64-Teres-I board config   Jonas Smedegaard
• [U-Boot] [PATCH] board/fsl/layerscape: Modify the aliases names   Cristi Sovaiala
• [U-Boot] [PATCH] ARM: imx: cm_fx6: Drop ad-hoc SATA binding   Christopher Spinrath
• [U-Boot] [PATCH] net: phy: ti: Fix clock output DT property   Grygorii Strashko
• [U-Boot] [PATCH v3 1/7] cmd: part: Add 'number' sub-command   Roman Stratiienko
• [U-Boot] [PATCH 8/8] rockchip: rk3288: make both evb variants use atf   Heiko Stuebner
• [U-Boot] [PATCH v2] dw_mmc: turn on the IO supply   Heiko Stuebner
• [U-Boot] [PATCH v2 1/3] board_f: Add mach specific DMA address check function.   Heiko Stuebner
• [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation   Andrea Scian - DAVE Embedded Systems
• [U-Boot] [PATCH 1/1] opos6ul: set REFSEL and REFR fields   Sébastien Szymanski
• [U-Boot] [PATCH 1/2] opos6uldev: don't call enable_lcdif_clock   Sébastien Szymanski
• [U-Boot] [PATCH 2/2] opos6uldev: remove board_ehci_hcd_init function   Sébastien Szymanski
• [U-Boot] [PATCH 2/2] opos6uldev: remove board_ehci_hcd_init function   Sébastien Szymanski
• [U-Boot] [PATCH v2 1/2] opos6uldev: don't call enable_lcdif_clock   Sébastien Szymanski
• [U-Boot] [PATCH v2 2/2] opos6uldev: remove board_ehci_hcd_init function   Sébastien Szymanski
• [U-Boot] [PATCH v2] include: android_bl_msg.h: Initial import   AKASHI Takahiro
• [U-Boot] [PATCH 0/4] fs: fat: fixes for write under root directory   AKASHI Takahiro
• [U-Boot] [PATCH 1/4] fs: fat: write to non-cluster-aligned root directory   AKASHI Takahiro
• [U-Boot] [PATCH 2/4] fs: fat: flush a directory cluster properly   AKASHI Takahiro
• [U-Boot] [PATCH 3/4] fs: fat: allocate a new cluster for root directory of fat32   AKASHI Takahiro
• [U-Boot] [PATCH 4/4] test/py: test_fs: add tests for creating/deleting many files   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: variable: attributes may not be changed if a variable exists   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: bootmgr: print a message when loading from BootNext failed   AKASHI Takahiro
• [U-Boot] [PATCH] cmd: env: print a message when setting UEFI variable failed   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: bootmgr: print a message when loading from BootNext failed   AKASHI Takahiro
• [U-Boot] [PATCH] cmd: env: print a message when setting UEFI variable failed   AKASHI Takahiro
• [U-Boot] [BUG] dm_extended_scan_fdt()   AKASHI Takahiro
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   AKASHI Takahiro
• [U-Boot] [PATCH 4/4] test/py: test_fs: add tests for creating/deleting many files   AKASHI Takahiro
• [U-Boot] [PATCH] efi_loader: variable: attributes may not be changed if a variable exists   AKASHI Takahiro
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   AKASHI Takahiro
• [U-Boot] RSA in U-Boot   AKASHI Takahiro
• [U-Boot] RSA in U-Boot   AKASHI Takahiro
• [U-Boot] efi_loader: efi_runtime_detach()?   AKASHI Takahiro
• [U-Boot] RSA in U-Boot   AKASHI Takahiro
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   AKASHI Takahiro
• [U-Boot] EFI_SPECIFICATION_VERSION   AKASHI Takahiro
• [U-Boot] [PATCH 1/1] fs: fat: correct file name normalization   AKASHI Takahiro
• [U-Boot] [PATCH v2 0/5] fs: fat: fixes for write under root directory   AKASHI Takahiro
• [U-Boot] [PATCH v2 1/5] fs: fat: write to non-cluster-aligned root directory   AKASHI Takahiro
• [U-Boot] [PATCH v2 2/5] fs: fat: flush a directory cluster properly   AKASHI Takahiro
• [U-Boot] [PATCH v2 3/5] fs: fat: allocate a new cluster for root directory of fat32   AKASHI Takahiro
• [U-Boot] [PATCH v2 4/5] test/py: test_fs: add tests for creating/deleting many files   AKASHI Takahiro
• [U-Boot] [PATCH v2 5/5] test/py: clarify a package dependency for test_fs   AKASHI Takahiro
• [U-Boot] [PATCH v2 0/3] efi_loader: variable: attributes may not be changed if a variable exists   AKASHI Takahiro
• [U-Boot] [PATCH v2 1/3] efi: selftest: APPEND_WRITE is not supported   AKASHI Takahiro
• [U-Boot] [PATCH v2 2/3] efi_loader: variable: return error for APPEND_WRITE   AKASHI Takahiro
• [U-Boot] [PATCH v2 3/3] efi_loader: variable: attributes may not be changed if a variable exists   AKASHI Takahiro
• [U-Boot] [PATCH v2] efi_loader: bootmgr: print a message when loading from BootNext failed   AKASHI Takahiro
• [U-Boot] [PATCH v2] cmd: env: print a message when setting UEFI variable failed   AKASHI Takahiro
• [U-Boot] efi_loader: efi_runtime_detach()?   AKASHI Takahiro
• [U-Boot] [PATCH 0/2] efi_loader: implement deprecated Unicode collation protocol   AKASHI Takahiro
• [U-Boot] [PATCH v2] cmd: env: print a message when setting UEFI variable failed   AKASHI Takahiro
• [U-Boot] [PATCH v3] cmd: env: print a message when setting UEFI variable failed   AKASHI Takahiro
• [U-Boot] [PATCH v2] efi_loader: bootmgr: print a message when loading from BootNext failed   AKASHI Takahiro
• [U-Boot] [PATCH v3 2/3] arm: dts: Stratix10: Add SDRAM node   Ley Foon Tan
• [U-Boot] [PATCH v2] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH v3 1/3] ddr: altera: Compile ALTERA SDRAM in SPL only   Ley Foon Tan
• [U-Boot] [PATCH v4 0/3] Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH v4 1/3] ddr: altera: Compile ALTERA SDRAM in SPL only   Ley Foon Tan
• [U-Boot] [PATCH v4 2/3] arm: dts: Stratix10: Add SDRAM node   Ley Foon Tan
• [U-Boot] [PATCH v4 3/3] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH v4 0/3] Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH v5 0/3] Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH v5 1/3] ddr: altera: Compile ALTERA SDRAM in SPL only   Ley Foon Tan
• [U-Boot] [PATCH v5 2/3] arm: dts: Stratix10: Add SDRAM node   Ley Foon Tan
• [U-Boot] [PATCH v5 3/3] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: stratix10: Fix SPI flash ENV_SECT_SIZE   Ley Foon Tan
• [U-Boot] [PATCH] arm: socfpga: stratix10: Fix SPI flash ENV_SECT_SIZE   Ley Foon Tan
• [U-Boot] [PATCH] configs: stratix10: Enable CONFIG_SPI_FLASH_USE_4K_SECTORS   Ley Foon Tan
• [U-Boot] [PATCH 00/14] Add Intel Agilex SoC support   Ley Foon Tan
• [U-Boot] [PATCH 01/14] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 02/14] arm: socfpga: Move firewall code to firewall file   Ley Foon Tan
• [U-Boot] [PATCH 03/14] arm: socfpga: Move Stratix10 and Agilex reset manager common code   Ley Foon Tan
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH 06/14] arm: socfpga: agilex: Add system manager support   Ley Foon Tan
• [U-Boot] [PATCH 07/14] arm: socfpga: agilex: Add clock manager support   Ley Foon Tan
• [U-Boot] [PATCH 08/14] arm: socfpga: agilex: Add CCU support for Agilex   Ley Foon Tan
• [U-Boot] [PATCH 09/14] ddr: altera: Restructure Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 10/14] ddr: altera: agilex: Add SDRAM driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH 11/14] board: intel: agilex: Add socdk board support for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 12/14] arm: socfpga: agilex: Add SPL for Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 13/14] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH 14/14] arm: socfpga: agilex: Enable Agilex SoC build   Ley Foon Tan
• [U-Boot] [PATCH 13/14] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH 10/14] ddr: altera: agilex: Add SDRAM driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH 08/14] arm: socfpga: agilex: Add CCU support for Agilex   Ley Foon Tan
• [U-Boot] [PATCH 07/14] arm: socfpga: agilex: Add clock manager support   Ley Foon Tan
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH 01/14] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 01/14] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH 04/14] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH 0/3] Intel FPGA PCIe fixes   Ley Foon Tan
• [U-Boot] [PATCH 1/3] pci: intel: Increase TLP polling counter   Ley Foon Tan
• [U-Boot] [PATCH 2/3] pci: intel: Fix error when enumerating multi-function PCIe device   Ley Foon Tan
• [U-Boot] [PATCH 3/3] pci: intel: Fix configuration type based on secondary number   Ley Foon Tan
• [U-Boot] [PATCH] i2c: designware: Get clock rate from clock DM   Ley Foon Tan
• [U-Boot] [PATCH 00/15] Add Intel Agilex SoC support   Ley Foon Tan
• [U-Boot] [PATCH 01/15] arm: socfpga: agilex: Add base address for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 02/15] arm: socfpga: Move firewall code to firewall file   Ley Foon Tan
• [U-Boot] [PATCH 03/15] arm: socfpga: Move Stratix10 and Agilex reset manager common code   Ley Foon Tan
• [U-Boot] [PATCH 04/15] arm: socfpga: agilex: Add reset manager support   Ley Foon Tan
• [U-Boot] [PATCH 05/15] arm: socfpga: Move Stratix10 and Agilex system manager common code   Ley Foon Tan
• [U-Boot] [PATCH 06/15] arm: socfpga: agilex: Add system manager support   Ley Foon Tan
• [U-Boot] [PATCH 07/15] clk: agilex: Add clock driver for Agilex.   Ley Foon Tan
• [U-Boot] [PATCH 08/15] arm: socfpga: agilex: Add clock manager support   Ley Foon Tan
• [U-Boot] [PATCH 09/15] arm: socfpga: agilex: Add CCU support for Agilex   Ley Foon Tan
• [U-Boot] [PATCH 10/15] ddr: altera: Restructure Stratix 10 SDRAM driver   Ley Foon Tan
• [U-Boot] [PATCH 11/15] ddr: altera: agilex: Add SDRAM driver for Agilex   Ley Foon Tan
• [U-Boot] [PATCH 12/15] board: intel: agilex: Add socdk board support for Intel Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 13/15] arm: socfpga: agilex: Add SPL for Agilex SoC   Ley Foon Tan
• [U-Boot] [PATCH 14/15] arm: dts: agilex: Add base dtsi and devkit dts   Ley Foon Tan
• [U-Boot] [PATCH 15/15] arm: socfpga: agilex: Enable Agilex SoC build   Ley Foon Tan
• [U-Boot] [PATCH] i2c: designware: Get clock rate from clock DM   Ley Foon Tan
• [U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Andy Tang
• [U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Andy Tang
• [U-Boot] [EXT] Re: [PATCH 1/3 v3] armv8: ls1028a: Add NXP LS1028A SoC support   Andy Tang
• [U-Boot] [PATCH] armv8: ls1028ardb: Add sd and emmc related environments   Andy Tang
• [U-Boot] [PATCH v2] armv8: ls1028ardb: Add sd and emmc related environments   Andy Tang
• [U-Boot] [PATCH] armv8: ls1028ardb: Add sd and emmc related environments   Yuantian Tang
• [U-Boot] [PATCH v2] armv8: ls1028ardb: Add sd and emmc related environments   Yuantian Tang
• [U-Boot] [PATCH] armv8: ls1028a: Add secure boot defconfig   Yuantian Tang
• [U-Boot] [PATCH v3 0/2] sunxi: Enable EMAC on A83T boards using Realtek RTL8211E PHY   Jagan Teki
• [U-Boot] [PATCH 1/5] mtd: spi-nor: fix page program issue when using spi-mem driver   Jagan Teki
• [U-Boot] [PATCH v3 0/2] sunxi: Enable EMAC on A83T boards using Realtek RTL8211E PHY   Jagan Teki
• [U-Boot] [PATCH v3 0/2] sunxi: Enable EMAC on A83T boards using Realtek RTL8211E PHY   Jagan Teki
• [U-Boot] Pull request v2: u-boot-sunxi/master   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [U-Boot] Booting MX6 via Serial Download after DM conversion   Jagan Teki
• [U-Boot] [PATCH v3 1/2] rockchip: add common header boot0.h and gpio.h for soc   Jagan Teki
• [U-Boot] [PATCH v6 03/13] Kconfig: Add default SPL_FIT_GENERATOR for rockchip   Jagan Teki
• [U-Boot] [PATCH v2 7/9] Makefile.spl: Create u-boot-spl-rockchip.bin for rk3399   Jagan Teki
• [U-Boot] [PATCH v6 04/13] arm: rockchip: rk3399: Move common configs in Kconfig   Jagan Teki
• [U-Boot] [PATCH v6 09/13] rockchip: rk3399: Add Nanopc T4 board support   Jagan Teki
• [U-Boot] [PATCH v2 2/5] spi: add spi-mem driver for MediaTek MT7629 SoC   Jagan Teki
• [U-Boot] [PATCH v7 0/4] arm64: rockchip: dts: Add rk3399 -u-boot.dtsi files   Jagan Teki
• [U-Boot] [PATCH v7 1/4] dts: Makefile: Build rockchip dtbs based on SoC types   Jagan Teki
• [U-Boot] [PATCH v7 2/4] arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files   Jagan Teki
• [U-Boot] [PATCH v7 3/4] rockchip: dts: rk3399-u-boot: Add u-boot, dm-pre-reloc for spi1   Jagan Teki
• [U-Boot] [PATCH v7 4/4] arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi   Jagan Teki
• [U-Boot] [PATCH] rockchip: rk3399: orangepi: Add SPL_TEXT_BASE   Jagan Teki
• [U-Boot] [PATCH v7 00/11] rockchip: Add new rk3399 boards   Jagan Teki
• [U-Boot] [PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2   Jagan Teki
• [U-Boot] [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip   Jagan Teki
• [U-Boot] [PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig   Jagan Teki
• [U-Boot] [PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux   Jagan Teki
• [U-Boot] [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1   Jagan Teki
• [U-Boot] [PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support   Jagan Teki
• [U-Boot] [PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 board support   Jagan Teki
• [U-Boot] [PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 board support   Jagan Teki
• [U-Boot] [PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 board support   Jagan Teki
• [U-Boot] [PATCH v3 0/6] rockchip: rk3399: Make u-boot.itb as BUILD_TARGET   Jagan Teki
• [U-Boot] [PATCH v3 1/6] Makefile: clean image.map   Jagan Teki
• [U-Boot] [PATCH v3 2/6] Makefile: clean bl31_*.bin   Jagan Teki
• [U-Boot] [PATCH v3 3/6] travis.yml: Add pyelftools install entry   Jagan Teki
• [U-Boot] [PATCH v3 4/6] rockchip: rk3399: Get bl31.elf via BL31   Jagan Teki
• [U-Boot] [PATCH v3 5/6] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0   Jagan Teki
• [U-Boot] [PATCH v3 6/6] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip   Jagan Teki
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Jagan Teki
• [U-Boot] [RESEND PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2   Jagan Teki
• [U-Boot] [RESEND PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip   Jagan Teki
• [U-Boot] [RESEND PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig   Jagan Teki
• [U-Boot] [RESEND PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux   Jagan Teki
• [U-Boot] [RESEND PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1   Jagan Teki
• [U-Boot] [RESEND PATCH v7 06/11] rockchip: rk3399: Add Nanopi M4 board support   Jagan Teki
• [U-Boot] [RESEND PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 board support   Jagan Teki
• [U-Boot] [RESEND PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 board support   Jagan Teki
• [U-Boot] [RESEND PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 board support   Jagan Teki
• [U-Boot] [RESEND PATCH v7 10/11] rockchip: rk3399: Add Rock PI 4 support   Jagan Teki
• [U-Boot] [RESEND PATCH v7 11/11] doc: rockchip: Add global doc for rk3399 build/flash   Jagan Teki
• [U-Boot] [PATCH] rockchip: rk3399: spl: Don't init dram if TPL enabled   Jagan Teki
• [U-Boot] [PATCH 0/8] rockchip: rk3399: Use spl_board_init in SPL, TPL   Jagan Teki
• [U-Boot] [PATCH 1/8] board: rk3399: Drop explicit uart enablement in spl_board_init   Jagan Teki
• [U-Boot] [PATCH 2/8] rockchip: rk3399: Support common spl_board_init   Jagan Teki
• [U-Boot] [PATCH 3/8] rockchip: rk3399: spl: Mark printascii into debug   Jagan Teki
• [U-Boot] [PATCH 4/8] rockchip: rk3399: Move u-boot, dm-pre-reloc of uart0, uart2   Jagan Teki
• [U-Boot] [PATCH 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT   Jagan Teki
• [U-Boot] [PATCH 6/8] rockchip: rk3399: tpl: Add spl_board_init   Jagan Teki
• [U-Boot] [PATCH 7/8] rockchip: rk3399: tpl: Mark printascii into debug   Jagan Teki
• [U-Boot] [PATCH 8/8] rockchip: rk3399: Enable TPL_BOARD_INIT   Jagan Teki
• [U-Boot] [PATCH 1/3] spi: atcspi200: Change include order   Jagan Teki
• [U-Boot] [PATCH 2/3] clk: sifive: fu540-prci: Change include order   Jagan Teki
• [U-Boot] [PATCH 3/3] serial: sifive: Change include order   Jagan Teki
• [U-Boot] [RESEND PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1   Jagan Teki
• [U-Boot] [PATCH 1/3] spi: atcspi200: Change include order   Jagan Teki
• [U-Boot] [PATCH 2/3] clk: sifive: fu540-prci: Change include order   Jagan Teki
• [U-Boot] [PATCH 3/3] serial: sifive: Change include order   Jagan Teki
• [U-Boot] Pull request v3: u-boot-sunxi/master   Jagan Teki
• [U-Boot] [PATCH v8] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1   Jagan Teki
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Jagan Teki
• [U-Boot] [PATCH 1/3] rk3399: orangepi: Enable TPL   Jagan Teki
• [U-Boot] [PATCH 2/3] rk3399: nanopi4: Enable TPL   Jagan Teki
• [U-Boot] [PATCH 3/3] doc: rockchip: Add doc for rk3399 TPL build/flash   Jagan Teki
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Jagan Teki
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Jagan Teki
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Jagan Teki
• [U-Boot] [linux-sunxi] Re: [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Jagan Teki
• [U-Boot] [PATCH v2 10/19] spi: mpc8xxx: Simplify logic a bit   Jagan Teki
• [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN   Jagan Teki
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Jagan Teki
• [U-Boot] [PATCH v3] spi: Zap sh_spi driver-related code   Jagan Teki
• [U-Boot] [PATCH v8 1/3] rockchip: rk3399: Add Nanopi NEO4 board support   Jagan Teki
• [U-Boot] [PATCH v8 2/3] rockchip: rk3399: Add Rockpro64 board support   Jagan Teki
• [U-Boot] [PATCH v8 3/3] rockchip: rk3399: Add Rock PI 4 support   Jagan Teki
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Jagan Teki
• [U-Boot] [PATCH] sun50i: a64: Fix broken A64-Teres-I board config   Jagan Teki
• [U-Boot] [PATCH] sun50i: h6: Fix Beelink GS1 board config   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH v3 3/3] arm: sunxi: h6: fix reset using r_wdog   Jagan Teki
• [U-Boot] [PATCH] sun50i: h6: Fix Beelink GS1 board config   Jagan Teki
• [U-Boot] [PATCH v2 00/19] spi: Convert MPC8XXX to DM   Jagan Teki
• [U-Boot] [PATCH] sun50i: h6: Fix Beelink GS1 board config   Jagan Teki
• [U-Boot] [PATCH] sun50i: a64: Fix broken A64-Teres-I board config   Jagan Teki
• [U-Boot] Pull request: u-boot-sunxi/master   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH v5 01/13] m68k: add basic set of devicetrees   Jagan Teki
• [U-Boot] Making U-Boot smaller   Jagan Teki
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [U-Boot] [EXT] Re: [PATCH 2/5] dm: spi: Convert Freescale ESPI driver to driver model   Jagan Teki
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Jagan Teki
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Jagan Teki
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Jagan Teki
• [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support   Jagan Teki
• [U-Boot] [PATCH v8 3/3] rockchip: rk3399: Add Rock PI 4 support   Jagan Teki
• [U-Boot] Pull request: u-boot-spi/master   Jagan Teki
• [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support   Jagan Teki
• [U-Boot] [PATCH v2 1/3] rk3399: orangepi: Enable TPL   Jagan Teki
• [U-Boot] [PATCH v2 2/3] rk3399: nanopi4: Enable TPL   Jagan Teki
• [U-Boot] [PATCH v2 3/3] doc: rockchip: Add doc for rk3399 TPL build/flash   Jagan Teki
• [U-Boot] [PATCH] mtd: spi-nor-ids: Add SPI_NOR_4B_OPCODES to micron mt35xu512g flash ID   Jagan Teki
• [U-Boot] [PATCH v2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands   Jagan Teki
• [U-Boot] [linux-sunxi] [PATCH v6] sun8i: h3: Add support for the Beelink-x2 STB   Jagan Teki
• [U-Boot] [PATCH] sunxi: move CONFIG_SPL_TEXT_BASE from *_defconfig to Kconfig   Jagan Teki
• [U-Boot] [PATCH v2] fsl_qspi: Improve QSPI driver to incorporate 4 byte commands   Jagan Teki
• [U-Boot] WaRP7 nok on master   Pierre-Jean Texier
• [U-Boot] WaRP7 nok on master   Pierre-Jean Texier
• [U-Boot] [PATCH v2] imx: Use a convenient default value for SYS_MALLOC_F_LEN   Pierre-Jean Texier
• [U-Boot] [PATCH] pico-imx7d: remove unused 'script' variable   Pierre-Jean Texier
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Pierre-Jean Texier
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Pierre-Jean Texier
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Pierre-Jean Texier
• [U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr   Pierre-Jean Texier
• [U-Boot] Regarding usage of e1000 driver with our device tree in U-boot.   Terry Thiburcius
• [U-Boot] [PATCH v2 10/19] spi: mpc8xxx: Simplify logic a bit   Joakim Tjernlund
• [U-Boot] [PATCH v2 10/19] spi: mpc8xxx: Simplify logic a bit   Joakim Tjernlund
• [U-Boot] [PATCH v2 01/10] rockchip: enable DEBUG_UART_BOARD_INIT by default   Philipp Tomsich
• [U-Boot] [PATCH v2 02/10] rockchip; kylin-rk3036: enabl DEBUG UART   Philipp Tomsich
• [U-Boot] [PATCH v2 03/10] rockchip: rk3036: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [PATCH v2 04/10] rockchip: rk3188: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [PATCH v2 05/10] rockchip: rk322x: move board_debug_uart_init() to rk322x.c   Philipp Tomsich
• [U-Boot] [PATCH v2 06/10] rockchip: rk3288: use grf structure to access soc_con2   Philipp Tomsich
• [U-Boot] [PATCH v2 07/10] rockchip: rk3288: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [PATCH v2 08/10] rockchip: rk3368: move board_debug_uart_init() to rk3368.c   Philipp Tomsich
• [U-Boot] [PATCH v2 09/10] rockchip: rk3399: use grf structure to access reg   Philipp Tomsich
• [U-Boot] [PATCH v2 10/10] rockchip: rk3399: add board_debug_uart_init()   Philipp Tomsich
• [U-Boot] [PATCH 1/3] rockchip: arm: use 'arch-rockchip' for common header   Philipp Tomsich
• [U-Boot] [PATCH 2/3] rockchip: use 'arch-rockchip' as header file path   Philipp Tomsich
• [U-Boot] [PATCH 3/3] rockchip: correct ARCH_SOC name   Philipp Tomsich
• [U-Boot] [PULL, RESEND] Please pull u-boot-rockchip/tags/rockchip-for-2019.07   Philipp Tomsich
• [U-Boot] [RESEND PATCH v7 00/11] rockchip: Add new rk3399 boards   Philipp Tomsich
• [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH 1/2] mtd: mxs_nand_spl: fix nand_command protocol violation   Michael Nazzareno Trimarchi
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Michael Nazzareno Trimarchi
• [U-Boot] [PATCH v3 0/2] sunxi: Enable EMAC on A83T boards using Realtek RTL8211E PHY   Chen-Yu Tsai
• [U-Boot] [PATCH v3 1/2] sunxi: Enable EMAC on the Cubietruck Plus   Chen-Yu Tsai
• [U-Boot] [PATCH v3 2/2] sunxi: Enable EMAC on the Bananapi M3   Chen-Yu Tsai
• [U-Boot] [PATCH v3 0/2] sunxi: Enable EMAC on A83T boards using Realtek RTL8211E PHY   Chen-Yu Tsai
• [U-Boot] [PATCH v3 0/2] sunxi: Enable EMAC on A83T boards using Realtek RTL8211E PHY   Chen-Yu Tsai
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Björn Töpel
• [U-Boot] RISC-V: Crashes with OpenSBI+U-Boot on the qemu "virt" machine   Björn Töpel
• [U-Boot] [RFC PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs   U.Mutlu
• [U-Boot] [RFC PATCH] drivers: ata: ahci_sunxi: Increased SATA/AHCI DMA TX/RX FIFOs   U.Mutlu
• [U-Boot] [PATCH v3 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs   Vaittinen, Matti
• [U-Boot] [PATCH v4 0/2] support for ROHM BD71837 and BD71847 PMICs   Matti Vaittinen
• [U-Boot] [PATCH v4 1/2] regulator: bd71837: copy the bd71837 pmic driver from NXP imx u-boot   Matti Vaittinen
• [U-Boot] [PATCH v4 2/2] regulator: bd718x7: support ROHM BD71837 and BD71847 PMICs   Matti Vaittinen
• [U-Boot] [PATCH v2 2/2] RISCV: image: Parse Image.gz support in booti.   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Add recovery SPL for R-Car Gen3   Marek Vasut
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Marek Vasut
• [U-Boot] [PATCH 1/3] Add fit-dtb.blob* to .gitignore to also exclude compressed blobs.   Marek Vasut
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: Move Stratix 10 SDRAM driver to DM   Marek Vasut
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Marek Vasut
• [U-Boot] [PATCH v3] ARM: am335x: Add phyCORE AM335x R2 support   Marek Vasut
• [U-Boot] [PATCH 1/3] Add fit-dtb.blob* to .gitignore to also exclude compressed blobs.   Marek Vasut
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Marek Vasut
• [U-Boot] [PATCH v1 03/18] dm: Add a No-op uclass   Marek Vasut
• [U-Boot] [PATCH v1 05/18] usb: dwc3: switch to peripheral mode when exiting   Marek Vasut
• [U-Boot] [PATCH v1 12/18] usb: dwc3: Add dwc3_of_parse() to get quirks information from DT   Marek Vasut
• [U-Boot] [PATCH v4] ARM: am335x: Add phyCORE AM335x R2 support   Marek Vasut
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Probe FPGA status before bridge enable   Marek Vasut
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Disable FPGA2SOC reset   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH v4 0/3] Move Stratix 10 SDRAM driver to DM   Marek Vasut
• [U-Boot] [PULL] u-boot-usb/master   Marek Vasut
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Marek Vasut
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Marek Vasut
• [U-Boot] [PATCH] sysreset: add support for socfpga sysreset   Marek Vasut
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Marek Vasut
• [U-Boot] [PATCH] sysreset: add support for socfpga sysreset   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH] cmd: reset: add parameters to specify reboot_mode   Marek Vasut
• [U-Boot] [PATCH] env: spi: Fix incorrect entry description   Marek Vasut
• [U-Boot] [PATCH 1/5] sh: sh7757lcr: Fix copy-paste error in README   Marek Vasut
• [U-Boot] [PATCH 2/5] sh: ecovec: Remove the board   Marek Vasut
• [U-Boot] [PATCH 3/5] sh: 7724: Remove CPU support   Marek Vasut
• [U-Boot] [PATCH 4/5] sh: sh7785lcr: Remove the board   Marek Vasut
• [U-Boot] [PATCH 5/5] sh: 7785: Remove CPU support   Marek Vasut
• [U-Boot] [PATCH 1/9] gpio: renesas: Add RZ/A1 R7S72100 GPIO driver   Marek Vasut
• [U-Boot] [PATCH 2/9] pinctrl: renesas: Add RZ/A1 R7S72100 pin control driver   Marek Vasut
• [U-Boot] [PATCH 3/9] timer: renesas: Add RZ/A1 R7S72100 OSTM timer driver   Marek Vasut
• [U-Boot] [PATCH 4/9] serial: sh: Add RZ/A1 support   Marek Vasut
• [U-Boot] [PATCH 5/9] net: sh_eth: Add RZ/A1 support   Marek Vasut
• [U-Boot] [PATCH 6/9] net: sh_eth: Add support for operation without clock framework   Marek Vasut
• [U-Boot] [PATCH 7/9] spi: rpc: Add support for operation without clock framework   Marek Vasut
• [U-Boot] [PATCH 8/9] ARM: dts: renesas: Add RZ/A1 platform code   Marek Vasut
• [U-Boot] [PATCH 9/9] ARM: dts: renesas: Add RZ/A1 GR-Peach board   Marek Vasut
• [U-Boot] [PATCH] usb: Convert CONFIG_USB_R8A66597_HCD to Kconfig   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH] video: ipuv3: Set max display bpp to 32   Marek Vasut
• [U-Boot] [PATCH 1/6] ARM: dts: imx: novena: Import Novena DT from Linux   Marek Vasut
• [U-Boot] [PATCH 2/6] ARM: imx: novena: Enable DM pin control   Marek Vasut
• [U-Boot] [PATCH 3/6] ARM: imx: novena: Enable DM GPIO   Marek Vasut
• [U-Boot] [PATCH 4/6] ARM: imx: novena: Convert block devices to DM   Marek Vasut
• [U-Boot] [PATCH 5/6] ARM: imx: novena: Enable DM USB   Marek Vasut
• [U-Boot] [PATCH 6/6] ARM: imx: novena: Convert to DM VIDEO   Marek Vasut
• [U-Boot] DM for ci_udc   Marek Vasut
• [U-Boot] [PATCH 5/6] ARM: imx: novena: Enable DM USB   Marek Vasut
• [U-Boot] [PATCH 6/6] ARM: imx: novena: Convert to DM VIDEO   Marek Vasut
• [U-Boot] [PATCH v4 0/3] Move Stratix 10 SDRAM driver to DM   Marek Vasut
• [U-Boot] [PATCH v5 0/3] Move Stratix 10 SDRAM driver to DM   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: control reboot from SRAM via env callback   Marek Vasut
• [U-Boot] [PATCH v2 2/2] sysreset: add support for socfpga sysreset   Marek Vasut
• [U-Boot] [v5 PATCH] RISCV: image: Add booti support   Marek Vasut
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH v1 0/3] Enable HPS execution stage notification   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: stratix10: Fix SPI flash ENV_SECT_SIZE   Marek Vasut
• [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support   Marek Vasut
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Marek Vasut
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Marek Vasut
• [U-Boot] [PATCH v13 0/9] Add support for loading FPGA bitstream   Marek Vasut
• [U-Boot] Automated/remote flashing of R-Car3   Marek Vasut
• [U-Boot] [PATCH v13 0/9] Add support for loading FPGA bitstream   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Marek Vasut
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Marek Vasut
• [U-Boot] [PATCH 1/2] bouncebuf: Add static buffer allocation method for SPL.   Marek Vasut
• [U-Boot] [PATCH v1 0/3] Enable HPS execution stage notification   Marek Vasut
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Marek Vasut
• [U-Boot] [PATCH v3 0/3] ARM: meson: Add G12A USB Support   Marek Vasut
• [U-Boot] [PATCH 2/3] bouncebuf: Add DMA validation check to addr_aligned().   Marek Vasut
• [U-Boot] Automated/remote flashing of R-Car3   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Marek Vasut
• [U-Boot] [PATCH] mmc: Downgrade SD/MMC from UHS/HS200/HS400 modes before boot   Marek Vasut
• [U-Boot] [PATCH] spl: Set spl_image->fdt_addr pointer for full fitImage configuration   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: dts: socfpga: Keep FPGA bridge entries in SPL DT   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: socfpga: Pull PL310 clearing into common code   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
• [U-Boot] [PATCH 1/2] ARM: dts: socfpga: Factor out U-Boot specifics from A10 handoff files   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: socfpga: Clear PL310 early in SPL   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: stratix10: Fix SPI flash ENV_SECT_SIZE   Marek Vasut
• [U-Boot] [PATCH] configs: stratix10: Enable CONFIG_SPI_FLASH_USE_4K_SECTORS   Marek Vasut
• [U-Boot] [PATCH] bouncebuf: add feature to support buffer only available in DRAM   Marek Vasut
• [U-Boot] Automated/remote flashing of R-Car3   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Marek Vasut
• [U-Boot] Automated/remote flashing of R-Car3   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: Re-add support for Aries MCV SoM and MCVEVK board   Marek Vasut
• [U-Boot] [PATCH v1 0/3] Enable PSCI services for booting Linux   Marek Vasut
• [U-Boot] [PATCH v1 0/3] Enable PSCI services for booting Linux   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] [PATCH] arm: socfpga: fix 3 boards missing env var "socfpga_legacy_reset_compat"   Marek Vasut
• [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver   Marek Vasut
• [U-Boot] [PATCH v3 2/4] sysreset: socfpga: gen5: add sysreset driver   Marek Vasut
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Marek Vasut
• [U-Boot] [PATCH 0/6] arm: socfpga: convert drivers to dm livetree   Marek Vasut
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Marek Vasut
• [U-Boot] [PATCH] net: ravb: Avoid unsupported internal delay mode for R-Car E3/D3   Marek Vasut
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Marek Vasut
• [U-Boot] [PATCH 07/14] arm: socfpga: agilex: Add clock manager support   Marek Vasut
• [U-Boot] [PATCH 10/14] ddr: altera: agilex: Add SDRAM driver for Agilex   Marek Vasut
• [U-Boot] [PATCH 13/14] arm: dts: agilex: Add base dtsi and devkit dts   Marek Vasut
• [U-Boot] [PATCH 01/12] serial: sh: Drop H8 support   Marek Vasut
• [U-Boot] [PATCH 02/12] serial: sh: Drop SH2007 support   Marek Vasut
• [U-Boot] [PATCH 03/12] serial: sh: Drop RTS7751R2D support   Marek Vasut
• [U-Boot] [PATCH 04/12] serial: sh: Drop assorted SH3, SH4, SH5 macros   Marek Vasut
• [U-Boot] [PATCH 05/12] sh: rsk7203: Remove the board   Marek Vasut
• [U-Boot] [PATCH 06/12] sh: rsk7264: Remove the board   Marek Vasut
• [U-Boot] [PATCH 07/12] sh: rsk7269: Remove the board   Marek Vasut
• [U-Boot] [PATCH 08/12] sh: sh2: Remove CPU support   Marek Vasut
• [U-Boot] [PATCH 09/12] sh: mpr2: Remove the board   Marek Vasut
• [U-Boot] [PATCH 10/12] sh: ms7720se: Remove the board   Marek Vasut
• [U-Boot] [PATCH 11/12] sh: shmin: Remove the board   Marek Vasut
• [U-Boot] [PATCH 12/12] sh: sh3: Remove CPU support   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PATCH 1/8] ARM: dts: imx: dh-imx6: Import DHCOM iMX6 PDK2 DTs from Linux   Marek Vasut
• [U-Boot] [PATCH 2/8] ARM: dts: imx: dh-imx6: Fix SPI CS polarity on DHCOM iMX6 PDK2   Marek Vasut
• [U-Boot] [PATCH 3/8] ARM: imx: dh-imx6: Enable DM pin control   Marek Vasut
• [U-Boot] [PATCH 4/8] ARM: imx: dh-imx6: Enable DM GPIO   Marek Vasut
• [U-Boot] [PATCH 5/8] ARM: imx: dh-imx6: Convert SD/MMC support to DM   Marek Vasut
• [U-Boot] [PATCH 6/8] ARM: imx: dh-imx6: Convert SATA support to DM   Marek Vasut
• [U-Boot] [PATCH 7/8] ARM: imx: dh-imx6: Convert USB support to DM   Marek Vasut
• [U-Boot] [PATCH 8/8] ARM: imx: dh-imx6: Convert SPI support to DM   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board   Marek Vasut
• [U-Boot] [PATCH 6/8] ARM: imx: dh-imx6: Convert SATA support to DM   Marek Vasut
• [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding   Marek Vasut
• [U-Boot] [PATCH] ARM: imx: cm_fx6: Drop ad-hoc SATA binding   Marek Vasut
• [U-Boot] [PATCH 1/2] watchdog: Split WDT from SPL_WDT   Marek Vasut
• [U-Boot] [PATCH 2/2] watchdog: imx: Add DM support   Marek Vasut
• [U-Boot] [PATCH] ARM: socfpga: Fix FPGA bitstream loading code   Marek Vasut
• [U-Boot] [PATCH 09/12] sh: mpr2: Remove the board   Marek Vasut
• [U-Boot] [PATCH v2 11/18] usb: dwc3-generic: if no max speed is specified in DT, assume super speed   Marek Vasut
• [U-Boot] [PATCH] ARM: imx: cm_fx6: Drop ad-hoc SATA binding   Marek Vasut
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Marek Vasut
• [U-Boot] [PATCH v2] arm: socfpga: Re-add support for Aries MCV SoM and MCVEV[KP] board   Marek Vasut
• [U-Boot] [PATCH 1/2] arm: socfpga: remove re-added ad-hoc reset code   Marek Vasut
• [U-Boot] [PATCH 05/14] arm: socfpga: Move Stratix10 and Agilex system manager common code   Marek Vasut
• [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN   Marek Vasut
• [U-Boot] [PATCH 4/8] spi: Kconfig: Mark MXS_SPI has BROKEN   Marek Vasut
• [U-Boot] [PATCH] ARM: renesas: grpeach: Align env position   Marek Vasut
• [U-Boot] [PATCH] Kconfig: fix FIT offset prompt text   Marek Vasut
• [U-Boot] [PATCH] Kconfig: fix FIT offset prompt text   Marek Vasut
• [U-Boot] [PATCH] Kconfig: fix FIT offset prompt text   Marek Vasut
• [U-Boot] [PATCH v2] Kconfig: fix FIT offset prompt text   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] [PATCH] sh: Add myself as SH maintainer   Marek Vasut
• [U-Boot] [PATCH v3] spi: Zap sh_spi driver-related code   Marek Vasut
• [U-Boot] [PATCH v4 01/13] clk: doc: Add documentation entry for Common Clock Framework [CCF] (i.MX)   Marek Vasut
• [U-Boot] [PATCH v4 04/13] clk: Extend struct clk to provide information regarding clock rate   Marek Vasut
• [U-Boot] [PATCH v3] spi: Zap sh_spi driver-related code   Marek Vasut
• [U-Boot] [PATCH V2 1/8] ARM: dts: imx: dh-imx6: Import DHCOM iMX6 PDK2 DTs from Linux   Marek Vasut
• [U-Boot] [PATCH V2 2/8] ARM: dts: imx: dh-imx6: Fix SPI CS polarity on DHCOM iMX6 PDK2   Marek Vasut
• [U-Boot] [PATCH V2 3/8] ARM: imx: dh-imx6: Enable DM pin control   Marek Vasut
• [U-Boot] [PATCH V2 4/8] ARM: imx: dh-imx6: Enable DM GPIO   Marek Vasut
• [U-Boot] [PATCH V2 5/8] ARM: imx: dh-imx6: Convert SD/MMC support to DM   Marek Vasut
• [U-Boot] [PATCH V2 6/8] ARM: imx: dh-imx6: Convert SATA support to DM   Marek Vasut
• [U-Boot] [PATCH V2 7/8] ARM: imx: dh-imx6: Convert USB support to DM   Marek Vasut
• [U-Boot] [PATCH V2 8/8] ARM: imx: dh-imx6: Convert SPI support to DM   Marek Vasut
• [U-Boot] [PATCH] video: Factor out vidconsole_put_string()   Marek Vasut
• [U-Boot] [PATCH 1/5] ARM: imx: Call imx_pcie_remove() only for non-DM PCI driver   Marek Vasut
• [U-Boot] [PATCH 2/5] pci: imx: Factor out hard-coded register base addresses   Marek Vasut
• [U-Boot] [PATCH 3/5] pci: imx: Fix potential 64bit memory access clamping   Marek Vasut
• [U-Boot] [PATCH 4/5] pci: imx: Pass driver private data around   Marek Vasut
• [U-Boot] [PATCH 5/5] pci: imx: Add DM and DT support   Marek Vasut
• [U-Boot] [PATCH V2 0/7] ARM: imx: Update Novena to DM/DT   Marek Vasut
• [U-Boot] [PATCH V2 1/7] ARM: dts: imx: novena: Import Novena DT from Linux   Marek Vasut
• [U-Boot] [PATCH V2 2/7] ARM: imx: novena: Enable DM pin control   Marek Vasut
• [U-Boot] [PATCH V2 3/7] ARM: imx: novena: Enable DM GPIO   Marek Vasut
• [U-Boot] [PATCH V2 4/7] ARM: imx: novena: Convert block devices to DM   Marek Vasut
• [U-Boot] [PATCH V2 5/7] ARM: imx: novena: Enable DM USB   Marek Vasut
• [U-Boot] [PATCH V2 6/7] ARM: imx: novena: Enable DM PCI   Marek Vasut
• [U-Boot] [PATCH V2 7/7] ARM: imx: novena: Convert to DM VIDEO   Marek Vasut
• [U-Boot] [PATCH 2/2] mx6sx: vining2000: pinmux usdhc4 reset   Marek Vasut
• [U-Boot] [PATCH] serial: mxc: Add iMX6SX compatible string   Marek Vasut
• [U-Boot] [PATCH 0/8] ARM: imx: Update VINING|2000 to DM/DT   Marek Vasut
• [U-Boot] [PATCH 1/8] ARM: imx: Rename VINING|2000   Marek Vasut
• [U-Boot] [PATCH 2/8] ARM: dts: imx: vining2000: Import VINING|2000 DT from Linux   Marek Vasut
• [U-Boot] [PATCH 3/8] ARM: imx: vining2000: Enable DM pin control   Marek Vasut
• [U-Boot] [PATCH 4/8] ARM: imx: vining2000: Convert MMC and block to DM   Marek Vasut
• [U-Boot] [PATCH 5/8] ARM: imx: vining2000: Enable DM USB   Marek Vasut
• [U-Boot] [PATCH 6/8] ARM: imx: vining2000: Enable DM GPIO   Marek Vasut
• [U-Boot] [PATCH 7/8] ARM: imx: vining2000: Enable DM PCI   Marek Vasut
• [U-Boot] [PATCH 8/8] ARM: imx: vining2000: Enable DM Serial   Marek Vasut
• [U-Boot] [PATCH 1/2] pci: renesas: Add RCar Gen3 PCIe controller driver   Marek Vasut
• [U-Boot] [PATCH 2/2] ARM: rmobile: Enable PCIe driver on R-Car Gen3 Salvator-X   Marek Vasut
• [U-Boot] [PATCH] ARM: rmobile: Sync Gen3 defconfigs   Marek Vasut
• [U-Boot] [PATCH V2] ARM: rmobile: Add recovery SPL for R-Car Gen3   Marek Vasut
• [U-Boot] [PATCH V2 1/2] pci: renesas: Add RCar Gen3 PCIe controller driver   Marek Vasut
• [U-Boot] [PATCH V2 2/2] ARM: rmobile: Enable PCIe driver on R-Car Gen3 Salvator-X   Marek Vasut
• [U-Boot] [PATCHv2 07/11] spi: Kconfig: Mark SH_SPI as DEPRECATED   Marek Vasut
• [U-Boot] [PATCH 1/2] mmc: tmio: sdhi: Minor macro cleanup   Marek Vasut
• [U-Boot] [PATCH 2/2] mmc: tmio: sdhi: HS400 manual adjustment   Marek Vasut
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Marek Vasut
• [U-Boot] [PATCH] Makefile: Prioritize external dtb if defined   Marek Vasut
• [U-Boot] [PATCH] ARM: renesas: Factor out DRAM setup on R-Car Gen3   Marek Vasut
• [U-Boot] [PATCH 1/1] tools/logos: add text to U-Boot logo   Marek Vasut
• [U-Boot] [PATCH 4/4] ARM: renesas: Configure DRAM size from ATF DT fragment   Marek Vasut
• [U-Boot] [PATCH v1 03/10] serial: pxa: clean-up platform data include file   Marek Vasut
• [U-Boot] [PATCH v1 07/10] arm: pxa: mmc: add driver model support   Marek Vasut
• [U-Boot] [PATCH v1 08/10] colibri_pxa270_defconfig: enable cmd_dm   Marek Vasut
• [U-Boot] [PATCH v1 09/10] colibri_pxa270: add mmc platform data   Marek Vasut
• [U-Boot] [PATCH 1/6] sh: espt_giga: Remove the board   Marek Vasut
• [U-Boot] [PATCH 2/6] sh: ms7722: Remove the board   Marek Vasut
• [U-Boot] [PATCH 3/6] sh: ms7750se: Remove the board   Marek Vasut
• [U-Boot] [PATCH 4/6] sh: ap_sh4a_4a: Remove the board   Marek Vasut
• [U-Boot] [PATCH 5/6] sh: ap325rxa: Remove the board   Marek Vasut
• [U-Boot] [PATCH 6/6] sh: r0p7734: Remove the board   Marek Vasut
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH v2 00/18] Improvement for the DWC3 USB generic driver and fixes for the K2 platforms   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] Making U-Boot smaller   Marek Vasut
• [U-Boot] Making U-Boot smaller   Marek Vasut
• [U-Boot] Making U-Boot smaller   Marek Vasut
• [U-Boot] Making U-Boot smaller   Marek Vasut
• [U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node   Marek Vasut
• [U-Boot] Making U-Boot smaller   Marek Vasut
• [U-Boot] [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] [PATCH] mmc: tmio: sdhi: Do not use auto-retuning in HS400 mode   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] [PATCH v6] ARM: am335x: Add phyCORE AM335x R2 support   Marek Vasut
• [U-Boot] [PATCH] gpio: dwapb_gpio: fix broken dev->node   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Marek Vasut
• [U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset   Marek Vasut
• [U-Boot] [PATCH] Arm: dts: socfpga: Remove invalid property from chose node   Marek Vasut
• [U-Boot] [PATCH v6] ARM: am335x: Add phyCORE AM335x R2 support   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] arm: mach-omap2: am33xx: Init pinmux before clock   Marek Vasut
• [U-Boot] [PATCH] spl: dfu: Fix printed variable name   Marek Vasut
• [U-Boot] [PATCH] gpio: pca953x: Add TI TCA9539 compatible string   Marek Vasut
• [U-Boot] [PATCH] Kconfig: Fix SPL_LOAD_FIT description   Marek Vasut
• [U-Boot] [PATCH v6] ARM: am335x: Add phyCORE AM335x R2 support   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] usb: musb-new: Fix Inventra DMA support   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PULL] u-boot-socfpga/master   Marek Vasut
• [U-Boot] [PULL] u-boot-sh/master   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [EXT] Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Marek Vasut
• [U-Boot] [PATCH 2/3] spl: ubi: Add support for loading simple fitImage   Marek Vasut
• [U-Boot] [PATCH 3/3] spl: fit: Place OS_BOOT DTB at CONFIG_SYS_SPL_ARGS_ADDR if defined   Marek Vasut
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Marek Vasut
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Marek Vasut
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Marek Vasut
• [U-Boot] [PATCH 1/3] spl: ram: Do not memcpy() identical buffers   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Marek Vasut
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Marek Vasut
• [U-Boot] [PATCHv3 10/10] configs: Disable now unbuildable SPI options for boards   Marek Vasut
• [U-Boot] [PATCH v3 00/11] clk: Port Linux common clock framework [CCF] to U-boot (tag: 5.0-rc3)   Marek Vasut
• [U-Boot] [EXT] Re: [PATCH 4/6] spl: mmc: support loading i.MX container format file   Marek Vasut
• [U-Boot] [PATCH] i2c: designware: Get clock rate from clock DM   Marek Vasut
• [U-Boot] [PATCH] i2c: designware: Get clock rate from clock DM   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] [RFC] Codepages for console, video, FAT file system   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] [PATCH] mmc: Avoid HS400 mode when accessing boot partitions   Marek Vasut
• [U-Boot] [PATCH] configs: Remove CONFIG_SPL_FS_EXT4 for all MX6 platforms   Marek Vasut
• [U-Boot] U-Boot PXA support   Marek Vasut
• [U-Boot] Cannot boot mx6qsabred with 2019.07-rc2   Abel Vesa
• [U-Boot] [PATCH 0/3] Update Luton network driver   Horatiu Vultur
• [U-Boot] [PATCH 1/3] net: mscc: luton: Update network driver for pcb90   Horatiu Vultur
• [U-Boot] [PATCH 2/3] board: mscc: luton: Update MSCC Luton board   Horatiu Vultur
• [U-Boot] [PATCH 3/3] net: mscc: ocelot: Update DTS for Luton pcb90   Horatiu Vultur
• [U-Boot] [PATCH 1/3] net: mscc: luton: Update network driver for pcb90   Horatiu Vultur
• [U-Boot] [PATCH] net: mscc: refactor mscc_miim   Horatiu Vultur
• [U-Boot] [PATCH] net: mscc: serval: Remove delay when serdes is configured   Horatiu Vultur
• [U-Boot] [PATCH 0/3] arm: k3: Update build support   Lokesh Vutla
• [U-Boot] [PATCH 1/3] tools: k3_get_x509 cert: Add a script to generate x509 certificate for K3 devices   Lokesh Vutla
• [U-Boot] [PATCH 2/3] arm: k3: config.mk: Use k3_gen_x509_cert.sh to generate boot images   Lokesh Vutla
• [U-Boot] [PATCH 3/3] remoteproc: k3_system_controller: Increase rx timeout   Lokesh Vutla
• [U-Boot] [PATCH] board_f: Do not mark pre-relocated fdt space as reserved   Lokesh Vutla
• [U-Boot] [PATCH] fdt_shrink_to_minimum: do not mark fdt space reserved unconditionally   Lokesh Vutla
• [U-Boot] [PATCH] spl: kconfig: separate sysreset and firmware drivers from misc   Lokesh Vutla
• [U-Boot] [PATCH 13/18] arm: K3: am654: Map common EEPROM data into SRAM scratch space   Lokesh Vutla
• [U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI   Lokesh Vutla
• [U-Boot] [PATCH 0/8] arm: k3: Allow for exclusive and shared device requests   Lokesh Vutla
• [U-Boot] [PATCH 1/8] firmware: ti_sci: Allow for device shared and exclusive requests   Lokesh Vutla
• [U-Boot] [PATCH 2/8] firmware: ti_sci: Add processor shutdown API method   Lokesh Vutla
• [U-Boot] [PATCH 3/8] armv7R: K3: am654: Shut down R5 core after ATF startup on A53   Lokesh Vutla
• [U-Boot] [PATCH 4/8] power-domain: Add private data to power domain   Lokesh Vutla
• [U-Boot] [PATCH 5/8] dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access   Lokesh Vutla
• [U-Boot] [PATCH 6/8] power: domain: ti_sci_power_domains: Add support for exclusive and shared access   Lokesh Vutla
• [U-Boot] [PATCH 7/8] armv7R: dts: k3-am654: Update power-domains property for each node   Lokesh Vutla
• [U-Boot] [PATCH 8/8] cmd: remoteproc: Add support for initializing devices individually   Lokesh Vutla
• [U-Boot] [PATCH 8/8] cmd: remoteproc: Add support for initializing devices individually   Lokesh Vutla
• [U-Boot] [PATCH v2 0/7] arm: k3: Allow for exclusive and shared device requests   Lokesh Vutla
• [U-Boot] [PATCH v2 1/7] firmware: ti_sci: Allow for device shared and exclusive requests   Lokesh Vutla
• [U-Boot] [PATCH v2 2/7] firmware: ti_sci: Add processor shutdown API method   Lokesh Vutla
• [U-Boot] [PATCH v2 3/7] armv7R: K3: am654: Shut down R5 core after ATF startup on A53   Lokesh Vutla
• [U-Boot] [PATCH v2 4/7] power-domain: Add private data to power domain   Lokesh Vutla
• [U-Boot] [PATCH v2 5/7] dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access   Lokesh Vutla
• [U-Boot] [PATCH v2 6/7] power: domain: ti_sci_power_domains: Add support for exclusive and shared access   Lokesh Vutla
• [U-Boot] [PATCH v2 7/7] armv7R: dts: k3-am654: Update power-domains property for each node   Lokesh Vutla
• [U-Boot] [PATCH 00/14] arm: k3: arm64: Initial support Texas Instrument's J721E Platform   Lokesh Vutla
• [U-Boot] [PATCH 01/14] arm: K3: j721e: Add basic support for J721E SoC definition   Lokesh Vutla
• [U-Boot] [PATCH 02/14] armV7R: K3: j721e: Add support for boot device detection   Lokesh Vutla
• [U-Boot] [PATCH 03/14] armV7R: K3: j721e: Allow using SPL BSS pre-relocation   Lokesh Vutla
• [U-Boot] [PATCH 04/14] armV7R: K3: j721e: Unlock all applicable control MMR registers   Lokesh Vutla
• [U-Boot] [PATCH 05/14] armV7R: K3: j721e: Store boot index from ROM   Lokesh Vutla
• [U-Boot] [PATCH 06/14] armv7R: K3: j721e: Shut down R5 core after ATF startup on A72   Lokesh Vutla
• [U-Boot] [PATCH 07/14] board: ti: j721e: Add board support for j721e evm   Lokesh Vutla
• [U-Boot] [PATCH 08/14] mmc: am654_sdhci: Separate J721E compatible into 8bit and 4bit versions   Lokesh Vutla
• [U-Boot] [PATCH 09/14] dt-bindings: pinctrl: k3: Introduce pinmux definitions for J721E   Lokesh Vutla
• [U-Boot] [PATCH 10/14] arm: dts: ti: Add Support for J721E SoC   Lokesh Vutla
• [U-Boot] [PATCH 11/14] arm: dts: k3-j721e: Add initial support for common processor board   Lokesh Vutla
• [U-Boot] [PATCH 12/14] arm: dts: j721e: Add r5 specific dt support   Lokesh Vutla
• [U-Boot] [PATCH 13/14] configs: j721e_evm_r5: Add initial support   Lokesh Vutla
• [U-Boot] [PATCH 14/14] configs: j721e_evm_a72: Add initial support   Lokesh Vutla
• [U-Boot] [PATCH v2 4/7] remoteproc: add elf file load support   Lokesh Vutla
• [U-Boot] [PATCH 0/5] remoteproc: cleanup k3_rpoc driver   Lokesh Vutla
• [U-Boot] [PATCH 1/5] cmd: remoteproc: Add support for initializing devices individually   Lokesh Vutla
• [U-Boot] [PATCH 2/5] cmd: remoteproc: Allow list command to print the probed devices   Lokesh Vutla
• [U-Boot] [PATCH 3/5] remoteproc: tisci: add TI-SCI processor control helper functions   Lokesh Vutla
• [U-Boot] [PATCH 4/5] remoteproc: k3_rproc: Update the driver to use ti_sci_proc helpers   Lokesh Vutla
• [U-Boot] [PATCH 5/5] remoteproc: k3_rproc: Rename to ti_k3_arm64_rproc   Lokesh Vutla
• [U-Boot] [PATCH] rtc: add Microcrystal RV-8803 driver   Michael Walle
• [U-Boot] [PATCH v2] rtc: add Microcrystal RV-8803 driver   Michael Walle
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Paul Walmsley
• [U-Boot] [PATCH] clk: sifive: fu540-prci: align primary DT match string to the DT bindings   Paul Walmsley
• [U-Boot] [PATCH] video: Add dependency for VIDEO_IMX_HDP_LOAD   Alison Wang
• [U-Boot] [PATCH v2] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [PATCH 1/2] armv8: Workaround for USB erratum of LS1028A   Ran Wang
• [U-Boot] [PATCH 2/2] armv8: ls1028a: enable workaround for errarum A-009007   Ran Wang
• [U-Boot] [PATCH v2 1/2] armv8: ls1028a: enable workaround for USB erratum A-008997   Ran Wang
• [U-Boot] [PATCH v2 2/2] armv8: ls1028a: enable workaround for USB errarum A-009007   Ran Wang
• [U-Boot] [PATCH v3 1/2] armv8: ls1028a: enable workaround for USB erratum A-008997   Ran Wang
• [U-Boot] [PATCH v3 2/2] armv8: ls1028a: enable workaround for USB errarum A-009007   Ran Wang
• [U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106   Ran Wang
• [U-Boot] [PATCH] test/py: don't use mmc_rd config for other mmc tests   Stephen Warren
• [U-Boot] [PATCH] test/py: don't use mmc_rd config for other mmc tests   Stephen Warren
• [U-Boot] [PATCH] test/py: don't use mmc_rd config for other mmc tests   Stephen Warren
• [U-Boot] [PATCH V3 05/10] fat: ff: read max contiguous file data   Stephen Warren
• [U-Boot] [PATCH v2 4/8] test: py: add option to select device tree used during compilation   Stephen Warren
• [U-Boot] [PATCH v2 4/8] test: py: add option to select device tree used during compilation   Stephen Warren
• [U-Boot] [PATCH v2 0/7] sound: Add sound support for Nyan   Tom Warren
• [U-Boot] [PATCH v2 0/7] sound: Add sound support for Nyan   Tom Warren
• [U-Boot] Pull request, u-boot-tegra/master   Tom Warren
• [U-Boot] [PATCH 1/2] pwm: imx: add Kconfig support   Martyn Welch
• [U-Boot] [PATCH v3 0/2] fit: Image node compression   Julius Werner
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Julius Werner
• [U-Boot] [PATCH v3 2/2] fit: Support compat string property in configuration node   Julius Werner
• [U-Boot] [PATCH 1/2 v2] fit: Support compression for non-kernel components (e.g. FDT)   Julius Werner
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Julius Werner
• [U-Boot] [PATCH v3 2/2] fit: Support compat string property in configuration node   Julius Werner
• [U-Boot] [PATCH v3 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Julius Werner
• [U-Boot] [PATCH v4 0/2] fit: Image node compression   Julius Werner
• [U-Boot] [PATCH v4 1/2] fit: Support compression for non-kernel components (e.g. FDT)   Julius Werner
• [U-Boot] [PATCH v4 2/2] fit: Support compat string property in configuration node   Julius Werner
• [U-Boot] [PATCH v3 0/5] Kconfig conversion: CONFIG_SYS_[DI]CACHE_OFF   Trevor Woerner
• [U-Boot] [PATCH v3 1/5] CONFIG_SYS_[ID]CACHE_OFF: unify the 'any' case   Trevor Woerner
• [U-Boot] [PATCH v3 2/5] CONFIG_SYS_[DI]CACHE_OFF: remove superfluous "1"   Trevor Woerner
• [U-Boot] [PATCH v3 3/5] CONFIG_SYS_[DI]CACHE_OFF: remove commented lines   Trevor Woerner
• [U-Boot] [PATCH v3 4/5] CONFIG_SYS_[DI]CACHE_OFF: convert to Kconfig   Trevor Woerner
• [U-Boot] [PATCH v3 5/5] CONFIG_SPL_SYS_[DI]CACHE_OFF: add   Trevor Woerner
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Derald Woods
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Derald Woods
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Derald Woods
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Derald Woods
• [U-Boot] [PATCH 1/3] ARM: dts: omap3-evm: Sync dts(i) files from Linux 5.1.5   Derald D. Woods
• [U-Boot] [PATCH 2/3] ARM: omap3: evm: Enable DM_USB in defconfig   Derald D. Woods
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Derald D. Woods
• [U-Boot] [PATCH 3/3] usb: musb-new: omap2430: Fix compilation warning with USB_MUSB_GADGET   Derald D. Woods
• [U-Boot] [PATCH v4 0/4] add command env erase   Frank Wunderlich
• [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support   Nick Xie
• [U-Boot] [PATCH v2] spl: add overall SPL size check   Masahiro Yamada
• [U-Boot] [PATCH v3] spl: add overall SPL size check   Masahiro Yamada
• [U-Boot] [PATCH v2 0/3] Enable spl relocation on arm   Andy Yan
• [U-Boot] [PATCH v2 1/3] powerpc: Convert CONFIG_SPL_RELOC_TEXT_BASE to Kconfig   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support   Andy Yan
• [U-Boot] [PATCH v2 3/3] arm: add spl relocation support for arm   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [PATCH v2 2/3] spl: add relocation support【请注意，邮件由sjg at google.com代发】   Andy Yan
• [U-Boot] [PATCH] dm: mmc: remove unused U_BOOT_DRIVER(mmc)   Andy Yan
• [U-Boot] [PATCH v3 1/2] rockchip: add common header boot0.h and gpio.h for soc   Kever Yang
• [U-Boot] [PATCH v3 2/2] arm: remove ARCH_ROCKCHIP macro in common code   Kever Yang
• [U-Boot] [PATCH 8/8] rockchip: rk3288: make both evb variants use atf   Kever Yang
• [U-Boot] [PATCH 5/8] rockchip: rk3288: reserve first 2MB when build with ATF support   Kever Yang
• [U-Boot] [PATCH 7/8] rockchip: rk3288: convert rk3288-evb to use tpl   Kever Yang
• [U-Boot] [PATCH v3 01/10] pinctrl: rockchip: Add pull-pin-default param and remove unused param   Kever Yang
• [U-Boot] [PATCH v3 02/10] pinctrl: rockchip: Remove redundant spaces   Kever Yang
• [U-Boot] [PATCH v3 03/10] pinctrl: rockchip: Split the common set_mux() into per Soc   Kever Yang
• [U-Boot] [PATCH v3 04/10] pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' iomux   Kever Yang
• [U-Boot] [PATCH v3 05/10] pinctrl: rockchip: Split the common set_drive() func into per Soc   Kever Yang
• [U-Boot] [PATCH v3 06/10] pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' drive strength   Kever Yang
• [U-Boot] [PATCH v3 07/10] pinctrl: rockchip: Split the common set_pull() func into per Soc   Kever Yang
• [U-Boot] [PATCH v3 08/10] pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' pull   Kever Yang
• [U-Boot] [PATCH v3 09/10] pinctrl: rockchip: Clean the unused type and label   Kever Yang
• [U-Boot] [PATCH v3 10/10] pinctrl: rockchip: Also move common set_schmitter func into per Soc file   Kever Yang
• [U-Boot] [PATCH v6 03/13] Kconfig: Add default SPL_FIT_GENERATOR for rockchip   Kever Yang
• [U-Boot] [PATCH v2 5/9] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0   Kever Yang
• [U-Boot] [PATCH v2 7/9] Makefile.spl: Create u-boot-spl-rockchip.bin for rk3399   Kever Yang
• [U-Boot] [PATCH v6 04/13] arm: rockchip: rk3399: Move common configs in Kconfig   Kever Yang
• [U-Boot] [PATCH] bouncebuf: add feature to support buffer only available in DRAM   Kever Yang
• [U-Boot] [PATCH v7 1/4] dts: Makefile: Build rockchip dtbs based on SoC types   Kever Yang
• [U-Boot] [PATCH v7 2/4] arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [U-Boot] [PATCH v7 3/4] rockchip: dts: rk3399-u-boot: Add u-boot, dm-pre-reloc for spi1【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [U-Boot] [PATCH v7 4/4] arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399: orangepi: Add SPL_TEXT_BASE   Kever Yang
• [U-Boot] [PATCH v7 01/11] rockchip: dts: rk3399: Sync pwm2_pin_pull_down from Linux 5.1-rc2   Kever Yang
• [U-Boot] [PATCH v7 02/11] Kconfig: Add default SPL_FIT_GENERATOR for rockchip   Kever Yang
• [U-Boot] [PATCH v7 03/11] arm: rockchip: rk3399: Move common configs in Kconfig   Kever Yang
• [U-Boot] [PATCH v7 04/11] rockchip: dts: rk3399: Sync rk3399-nanopi4.dtsi from Linux   Kever Yang
• [U-Boot] [PATCH v7 05/11] rockchip: dts: rk3399: nanopi4: Use CD pin as RK_FUNC_1   Kever Yang
• [U-Boot] [PATCH v7 07/11] rockchip: rk3399: Add Nanopc T4 board support   Kever Yang
• [U-Boot] [PATCH v7 08/11] rockchip: rk3399: Add Nanopi NEO4 board support   Kever Yang
• [U-Boot] [PATCH v7 09/11] rockchip: rk3399: Add Rockpro64 board support   Kever Yang
• [U-Boot] [RESEND PATCH v7 10/11] rockchip: rk3399: Add Rock PI 4 support   Kever Yang
• [U-Boot] [RESEND PATCH v7 11/11] doc: rockchip: Add global doc for rk3399 build/flash   Kever Yang
• [U-Boot] [PATCH v3 1/6] Makefile: clean image.map   Kever Yang
• [U-Boot] [PATCH v3 2/6] Makefile: clean bl31_*.bin   Kever Yang
• [U-Boot] [PATCH v3 3/6] travis.yml: Add pyelftools install entry   Kever Yang
• [U-Boot] [PATCH v3 4/6] rockchip: rk3399: Get bl31.elf via BL31   Kever Yang
• [U-Boot] [PATCH v3 6/6] Kconfig: Add u-boot.itb BUILD_TARGET for Rockchip   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399: spl: Don't init dram if TPL enabled   Kever Yang
• [U-Boot] [PULL]Please pull u-boot-rockchip/tags/rockchip-for-v2019.07-rc1   Kever Yang
• [U-Boot] [PATCH v3 01/10] pinctrl: rockchip: Add pull-pin-default param and remove unused param【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 02/10] pinctrl: rockchip: Remove redundant spaces【请注意，邮件由u-boot-bounces at lists.denx.de代发】 spaces   Kever Yang
• [U-Boot] [PATCH v3 03/10] pinctrl: rockchip: Split the common set_mux() into per Soc【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 04/10] pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' iomux【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 05/10] pinctrl: rockchip: Split the common set_drive() func into per Soc【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 06/10] pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' drive strength【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 07/10] pinctrl: rockchip: Split the common set_pull() func into per Soc【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 08/10] pinctrl: rockchip: Special treatment for RK3288 gpio0 pins' pull【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 09/10] pinctrl: rockchip: Clean the unused type and label【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v3 10/10] pinctrl: rockchip: Also move common set_schmitter func into per Soc file【请注意，邮件由u-boot-bounces at lists.denx.de代发】   Kever Yang
• [U-Boot] [PATCH v7 1/4] dts: Makefile: Build rockchip dtbs based on SoC types【请注意，邮件由linux-rockchip-bounces+kever.yang=rock-chips.com at lists.infradead.org代发】   Kever Yang
• [U-Boot] [PATCH v7 2/4] arm64: rockchip: dts: rk3399: Add board -u-boot.dtsi files   Kever Yang
• [U-Boot] [PATCH v7 3/4] rockchip: dts: rk3399-u-boot: Add u-boot, dm-pre-reloc for spi1   Kever Yang
• [U-Boot] [PATCH v7 4/4] arm64: rockchip: dts: rk3399: Use rk3399-u-boot.dtsi   Kever Yang
• [U-Boot] [PULL]Please pull u-boot-rockchip/tags/rockchip-for-v2019.07-rc1   Kever Yang
• [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().   Kever Yang
• [U-Boot] Pull request v2: u-boot-rockchip/tags/rockchip-for-v2019.07-rc1   Kever Yang
• [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().【请注意，邮件由sjg at google.com代发】   Kever Yang
• [U-Boot] [PATCH v1] dm: pinctrl: Remove obsolete function pinctrl_decode_pin_config_dm().   Kever Yang
• [U-Boot] [PATCH 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts   Kever Yang
• [U-Boot] [PATCH 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Kever Yang
• [U-Boot] [PATCH v8 3/3] rockchip: rk3399: Add Rock PI 4 support   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399-puma: Reduce SPL size.   Kever Yang
• [U-Boot] [PATCH 1/2] rk3399: Restore broken USB3 DTS description.   Kever Yang
• [U-Boot] [PATCH 1/3] rockchip: pinctrl: rk3399: Add support for UART3.   Kever Yang
• [U-Boot] [PATCH 2/3] rockchip: rk3399: Add option to print on UART3.   Kever Yang
• [U-Boot] [PATCH 3/3] rockchip: clk: rk3399: allow requests for all UART clocks   Kever Yang
• [U-Boot] [PATCH 1/2] arm: dts: rock960: Enable booting from eMMC when using SPL   Kever Yang
• [U-Boot] [PATCH 2/2] arm: dts: ficus: Enable booting from eMMC when using SPL   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399-puma: Move ENV_OFFSET to end of SPI NOR.   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399-puma: Re-disable SPL_ATF_NO_PLATFORM_PARAM   Kever Yang
• [U-Boot] [PATCH] rockchip: rk3399-puma: Reduce SPL size.   Kever Yang
• [U-Boot] [PATCH] rockchip: Cleanup of make_fit_atf.py.   Kever Yang
• [U-Boot] [PATCH 1/3] rk3399: orangepi: Enable TPL   Kever Yang
• [U-Boot] [PATCH 2/3] rk3399: nanopi4: Enable TPL   Kever Yang
• [U-Boot] [PATCH 3/3] doc: rockchip: Add doc for rk3399 TPL build/flash   Kever Yang
• [U-Boot] [PATCH 1/3] rk3399: orangepi: Enable TPL   Kever Yang
• [U-Boot] [PATCH v8 1/3] rockchip: rk3399: Add Nanopi NEO4 board support   Kever Yang
• [U-Boot] [PATCH v8 2/3] rockchip: rk3399: Add Rockpro64 board support   Kever Yang
• [U-Boot] [PATCH v2 1/5] rockchip: rk3328: add SPL board file support   Kever Yang
• [U-Boot] [PATCH v2 2/5] rockchip: rk3328: add SPL support   Kever Yang
• [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board   Kever Yang
• [U-Boot] [PATCH v2 3/5] rockchip: Kconfig: enable SPL support for rk3328   Kever Yang
• [U-Boot] [PATCH v2 4/5] rockchip: dts: rk3328: add rk3328-rock64.dts   Kever Yang
• [U-Boot] [PATCH v2 5/5] rockchip: rk3328: add rock64-rk3328_defconfig   Kever Yang
• [U-Boot] [PATCH v2 0/5] Add initial support for Pine64 Rock64 board   Kever Yang
• [U-Boot] Pull request: u-boot-rockchip/tags/rockchip-for-v2019.07-rc3   Kever Yang
• [U-Boot] [PATCH 0/3] add new wdt driver for sp805   Qiang Zhao
• [U-Boot] [patch v3 1/3] watchdog: add sp805 watchdog support   Qiang Zhao
• [U-Boot] [patch v3 2/3] dts: fsl-ls1028a: add sp805 node which is a watchdog   Qiang Zhao
• [U-Boot] [patch v3 3/3] defconfig: ls1028ardb: enable wdt   Qiang Zhao
• [U-Boot] [linux-sunxi] [PATCH 2/6] sunxi: gpio: Enable support for H6 pin controller   Icenowy Zheng
• [U-Boot] [PATCH v1 1/4] mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled   Yinbo Zhu
• [U-Boot] [PATCH v1 2/4] armv8: fsl-lsch3: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] [PATCH v1 3/4] armv8: layerscape: enable DMA mode of SD in SPL boot   Yinbo Zhu
• [U-Boot] [PATCH v1 4/4] armv8: ls1028a: enable DMA mode of SD in SPL   Yinbo Zhu
• [U-Boot] [PATCH v2 1/2] mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled   Yinbo Zhu
• [U-Boot] [PATCH v2 2/2] armv8: fsl-lsch3: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] [PATCH v3 1/2] mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled   Yinbo Zhu
• [U-Boot] [PATCH v3 2/2] armv8: fsl-lsch3: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] [PATCH v4 1/2] armv8: fsl-lsch3: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] [PATCH v4 2/2] mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled   Yinbo Zhu
• [U-Boot] [PATCH v5 1/2] armv8: fsl-lsch3: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] [PATCH v5 2/2] mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled   Yinbo Zhu
• [U-Boot] [PATCH v1] armv8: lx2160aqds: Enable eSDHC controllers   Yinbo Zhu
• [U-Boot] [PATCH v1] armv8: fsl-lsch2: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] [PATCH v2] armv8: fsl-lsch2: add clock support for the second eSDHC   Yinbo Zhu
• [U-Boot] Booting imx_4.14.98_2.0.0_ga on i.MX8QM MEK Board   Marcel Ziswiler
• [U-Boot] Booting imx_4.14.98_2.0.0_ga on i.MX8QM MEK Board   Marcel Ziswiler
• [U-Boot] Booting imx_4.14.98_2.0.0_ga on i.MX8QM MEK Board   Marcel Ziswiler
• [U-Boot] [PATCH] board: toradex: drop support.arm maintainer email   Marcel Ziswiler
• [U-Boot] [PATCH v6 0/2] colibri imx8qxp 2gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH v6 1/2] imx: fix building for i.mx8 without spl   Marcel Ziswiler
• [U-Boot] [PATCH v6 2/2] board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH v2 0/6] apalis imx8qm 4gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH v2 1/6] arm: dts: imx8qm: add lpuart1, lpuart2, lpuart3, lpuart4   Marcel Ziswiler
• [U-Boot] [PATCH v2 2/6] arm: dts: imx8qm: add support for i2c0, i2c1, i2c2, i2c3 and i2c4   Marcel Ziswiler
• [U-Boot] [PATCH v2 3/6] clk: imx8qm: fix usdhc2 clocks   Marcel Ziswiler
• [U-Boot] [PATCH v2 4/6] imx8qm: fix cpu frequency reporting   Marcel Ziswiler
• [U-Boot] [PATCH v2 5/6] imx8: fuse: fix fuse driver   Marcel Ziswiler
• [U-Boot] [PATCH v2 6/6] board: toradex: add apalis imx8qm 4gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH] board: toradex: drop support.arm maintainer email   Marcel Ziswiler
• [U-Boot] [PATCH v3 1/1] colibri_imx7: migrate usb to driver model   Marcel Ziswiler
• [U-Boot] [PATCH v3 1/1] colibri_imx7: migrate usb to driver model   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] [PATCH 1/1] toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN   Marcel Ziswiler
• [U-Boot] [PATCH 1/1] toradex apalis/colibri: extend CONFIG_SYS_MALLOC_F_LEN   Marcel Ziswiler
• [U-Boot] [PATCH v1 00/10] arm: pxa: mmc: add driver model support   Marcel Ziswiler
• [U-Boot] [PATCH v1 01/10] mmc: add missing space before comment delimiter   Marcel Ziswiler
• [U-Boot] [PATCH v1 02/10] mmc: fsl_esdhc: annotate endifs   Marcel Ziswiler
• [U-Boot] [PATCH v1 03/10] serial: pxa: clean-up platform data include file   Marcel Ziswiler
• [U-Boot] [PATCH v1 04/10] Makefile: allow dm_mmc without of_control   Marcel Ziswiler
• [U-Boot] [PATCH v1 05/10] dm: core: gracefully handle alias seq without of   Marcel Ziswiler
• [U-Boot] [PATCH v1 06/10] kconfig: mmc: move pxa_mmc_generic to kconfig   Marcel Ziswiler
• [U-Boot] [PATCH v1 07/10] arm: pxa: mmc: add driver model support   Marcel Ziswiler
• [U-Boot] [PATCH v1 08/10] colibri_pxa270_defconfig: enable cmd_dm   Marcel Ziswiler
• [U-Boot] [PATCH v1 09/10] colibri_pxa270: add mmc platform data   Marcel Ziswiler
• [U-Boot] [PATCH v1 10/10] colibri_pxa270_defconfig: enable dm_mmc   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] [PATCH] mmc: Move tegra loopback disable option to be under tegra   Marcel Ziswiler
• [U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding   Marcel Ziswiler
• [U-Boot] [PATCH 1/5] colibri_imx7: use UUID for rootfs   Marcel Ziswiler
• [U-Boot] [PATCH 2/5] colibri-imx6ull: use UUID for rootfs   Marcel Ziswiler
• [U-Boot] [PATCH 3/5] colibri_vf: use UUID for rootfs   Marcel Ziswiler
• [U-Boot] [PATCH 4/5] apalis_imx6: use UUID for rootfs   Marcel Ziswiler
• [U-Boot] [PATCH 5/5] apalis-tk1: use UUID for rootfs   Marcel Ziswiler
• [U-Boot] [PATCH 4/5] apalis_imx6: use UUID for rootfs   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] U-Boot PXA support   Marcel Ziswiler
• [U-Boot] [PATCH v7 0/2] colibri imx8qxp 2gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH v7 1/2] imx: fix building for i.mx8 without spl   Marcel Ziswiler
• [U-Boot] [PATCH v7 2/2] board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH v3 0/6] apalis imx8qm 4gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH v3 1/6] arm: dts: imx8qm: add lpuart1, lpuart2, lpuart3, lpuart4   Marcel Ziswiler
• [U-Boot] [PATCH v3 2/6] arm: dts: imx8qm: add support for i2c0, i2c1, i2c2, i2c3 and i2c4   Marcel Ziswiler
• [U-Boot] [PATCH v3 3/6] clk: imx8qm: fix usdhc2 clocks   Marcel Ziswiler
• [U-Boot] [PATCH v3 4/6] imx8qm: fix cpu frequency reporting   Marcel Ziswiler
• [U-Boot] [PATCH v3 5/6] imx8: fuse: fix fuse driver   Marcel Ziswiler
• [U-Boot] [PATCH v3 6/6] board: toradex: add apalis imx8qm 4gb wb it v1.0b module support   Marcel Ziswiler
• [U-Boot] [PATCH] riscv: add Kconfig entries for the F and D ISA extensions support   tesheng at andestech.com
• [U-Boot] Pull request: u-boot-riscv/master   uboot at andestech.com
• [U-Boot] u boot boot error   froglike6
• [U-Boot] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB   codekipper at gmail.com
• [U-Boot] [PATCH v5] sun8i: h3: Add support for the Beelink-x2 STB   codekipper at gmail.com
• [U-Boot] [PATCH v6] sun8i: h3: Add support for the Beelink-x2 STB   codekipper at gmail.com
• [U-Boot] [PATCH] tools: use read-only mmap in fit_check_sign   luca.boccassi at gmail.com
• [U-Boot] [PATCH] sun50i: h6: Fix Beelink GS1 board config   peron.clem at gmail.com
• [U-Boot] [PATCH RESEND 0/1] Add ps7_init_gpl.c for Z-turn board   tossel at gmail.com
• [U-Boot] [PATCH RESEND 1/1] Add ps7_init_gpl.c for Z-turn board   tossel at gmail.com
• [U-Boot] [PATCH RESEND 1/1] Add ps7_init_gpl.c for Z-turn board   tossel at gmail.com
• [U-Boot] [PATCH RESEND 1/1] Add ps7_init_gpl.c for Z-turn board   tossel at gmail.com
• [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support   xieqinick at gmail.com
• [U-Boot] [PATCH] rockchip: rk3399: Add Khadas Edge board support   xieqinick at gmail.com
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Probe FPGA status before bridge enable   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Enable DMA330 DMA controller   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1] ARM: socfpga: stratix10: Disable FPGA2SOC reset   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 0/3] Enable HPS execution stage notification   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 1/3] ARM: socfpga: stratix10: Add HPS execution stage notification function   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 2/3] ARM: socfpga: stratix10: To notify SDM when SPL pass control to U-Boot   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 3/3] ARM: socfpga: stratix10: To notify SDM when U-Boot pass control to Linux   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 0/3] Enable PSCI services for booting Linux   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 1/3] ARM: socfpga: stratix10: Enable PSCI system reset   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 2/3] ARM: socfpga: stratix10: Enable PSCI CPU_ON   chee.hong.ang at intel.com
• [U-Boot] [PATCH v1 3/3] ARM: socfpga: stratix10: Enable PSCI support for Stratix 10   chee.hong.ang at intel.com
• [U-Boot] [PATCH v13 0/9] Add support for loading FPGA bitstream   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 1/9] ARM: socfpga: Description on FPGA bitstream type and file name for Arria 10   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 2/9] ARM: socfpga: Add default FPGA bitstream fitImage for Arria10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 3/9] ARM: socfpga: Cleaning up and ensuring consistent format messages in driver   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 4/9] ARM: socfpga: Moving the watchdog reset to the for-loop status polling   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 5/9] ARM: socfpga: Add FPGA drivers for Arria 10 FPGA bitstream loading   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 6/9] ARM: socfpga: Add the configuration for FPGA SoCFPGA A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 7/9] spl : socfpga: Implement fpga bitstream loading with socfpga loadfs   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 8/9] ARM: socfpga: Synchronize the configuration for A10 SoCDK   tien.fong.chee at intel.com
• [U-Boot] [PATCH v13 9/9] ARM: socfpga: Increase Malloc pool size to support FAT filesystem in SPL   tien.fong.chee at intel.com
• [U-Boot] [PATCH] reset: socfpga: release more A10 peripherals out of reset   tien.fong.chee at intel.com
• [U-Boot] [PATCH] Arm: dts: socfpga: Remove invalid property from chose node   tien.fong.chee at intel.com
• [U-Boot] [PATCH v2 1/2] power: pmic: palmas/lp87565/lp873x: Remove $SPL from Makefile   keerthy
• [U-Boot] [BUG] simple-bus and rsa-sw with DM_FLAG_PRE_RELOC   takahiro.akashi at linaro.org
• [U-Boot] [v3, 0/5] Split fsl_esdhc driver for i.MX   linux-kernel-dev
• [U-Boot] [PATCH 1/3] board: atmel: sama5d2_icp: add periph reset in SPL hw init   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 2/3] board: atmel: sama5d2_icp: standby disable on CAN transceivers in SPL   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 3/3] board: atmel: sama5d2_icp: enable green led on SPL completion   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH v2] spl: kconfig: separate sysreset and firmware drivers from misc   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] arm: at91: gardena-smart-gateway-at91sam: Enable CMD_WDT   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 1/3] board: atmel: sama5d2_icp: add periph reset in SPL hw init   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 1/2] spl: at91: add support for SPL_AT91_MCK_BYPASS   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 2/2] configs: at91: sama5d2_icp: enable CONFIG_SPL_AT91_MCK_BYPASS and resync   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] configs: sama5d2_ptc_ek: fix NAND PMECC_CAP   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH] configs: atmel: sama5d4_xplained_mmc: enable HW PMECC   Eugen.Hristev at microchip.com
• [U-Boot] [PATCH 0/5] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH 1/5] dt-bindings: spi: add bindings for Atmel QSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH 2/5] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH 3/5] configs: sama5d2_xplained: enable SST and MACRONIX flashes   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH 4/5] ARM: dts: at91: sama5d2_xplained: use jedec, spi-nor compatible   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH 5/5] ARM: dts: at91: sama5d2_xplained: describe flash bus width   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 00/10] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 01/10] dt-bindings: spi: add bindings for Atmel QSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 02/10] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 03/10] configs: sama5d2_xplained: enable qspi controller and flashes   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 04/10] configs: sama5d27_som1_ek: enable qspi controller and flashes   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 05/10] ARM: dts: at91: sama5d2_xplained: fix QSPI0 node   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 06/10] ARM: at91: sama5: add common environment for QSPI   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 07/10] configs: sama5d2_xplained: add qspiflash_defconfig   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 08/10] configs: sama5d27_som1_ek: add qspiflash_defconfig   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 09/10] configs: sama5d27_som1_ek: qspi: use common memory layout   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v2 10/10] configs: sama5d2_xplained: add support QSPI flash boot   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 00/10] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 01/10] dt-bindings: spi: add bindings for Atmel QSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 02/10] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 03/10] configs: sama5d2_xplained: enable qspi controller and flashes   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 04/10] configs: sama5d27_som1_ek: enable qspi controller and flashes   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 05/10] ARM: dts: at91: sama5d2_xplained: fix QSPI0 node   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 06/10] ARM: at91: sama5: add common environment for QSPI   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 07/10] configs: sama5d2_xplained: add qspiflash_defconfig   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 08/10] configs: sama5d27_som1_ek: add qspiflash_defconfig   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 09/10] configs: sama5d27_som1_ek: qspi: use common memory layout   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 10/10] configs: sama5d2_xplained: add support QSPI flash boot   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v3 02/10] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH v4 02/10] spi: Add Atmel QuadSPI driver   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH] configs: sama5d2_ptc_ek: fix NAND PMECC_CAP   Tudor.Ambarus at microchip.com
• [U-Boot] [PATCH 1/6] env: ubi: KConfig: add CONFIG_ENV_UBI_VOLUME_REDUND   mk at mkio.de
• [U-Boot] [PATCH] arm: mvebu: helios4: add MMC to SPL DT   dgilmore at redhat.com
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   dannenberg at ti.com
• [U-Boot] [PATCH 00/13] System Firmware Loader for TI K3 family SoCs   dannenberg at ti.com
• [U-Boot] [RFC 04/11] misc: fs_loader: Allow initializing blkdev using platform data   dannenberg at ti.com
• [U-Boot] [RFC 05/11] arm: K3: Introduce System Firmware loader framework   dannenberg at ti.com
• [U-Boot] [RFC 09/11] armv7R: dts: k3: am654: Update for loading SYSFW from MMC   dannenberg at ti.com
• [U-Boot] [linux-sunxi] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB   Jernej Škrabec
• [U-Boot] [linux-sunxi] [PATCH v4] sun8i: h3: Add support for the Beelink-x2 STB   Jernej Škrabec