[U-Boot] [PATCH v2 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass
Patrick DELAUNAY
patrick.delaunay at st.com
Mon May 20 13:27:03 UTC 2019
Hi Urja,
>
> This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF
> to signal when we need it. Enable it from the STPMIC1 config and in sandbox.
>
> The config flag is transitionary, that is it can be removed after all poweroff
> implementations use sysreset, and just have CMD_POWEROFF depend on
> sysreset.
>
> Signed-off-by: Urja Rannikko <urjaman at gmail.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay at st.com>
Tested on stm32mp1-ev1 with 2 other corrections:
[U-Boot] pmic: stpmic1: add support for SYSRESET_POWER_OFF
http://patchwork.ozlabs.org/patch/1101856/
[U-Boot] sysreset: syscon: add support for power off
http://patchwork.ozlabs.org/patch/1101905/
Tested-by: Patrick Delaunay <patrick.delaunay at st.com>
> ---
> v2: Fixup STPMIC1 config selection of CONFIG_SYSRESET_CMD_POWEROFF
> ---
> arch/Kconfig | 1 +
> arch/arm/mach-stm32mp/Makefile | 3 ---
> arch/arm/mach-stm32mp/cmd_poweroff.c | 24 ------------------------
> drivers/power/pmic/Kconfig | 1 +
> drivers/sysreset/Kconfig | 10 ++++++++++
> drivers/sysreset/sysreset-uclass.c | 18 ++++++++++++++++++
> 6 files changed, 30 insertions(+), 27 deletions(-) delete mode 100644
> arch/arm/mach-stm32mp/cmd_poweroff.c
>
> diff --git a/arch/Kconfig b/arch/Kconfig index 239289b885..83ff21dfd7 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -91,6 +91,7 @@ config SANDBOX
> select LZO
> select SPI
> select SUPPORT_OF_CONTROL
> + select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
> imply BITREVERSE
> select BLOBLIST
> imply CMD_DM
> diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
> index 1493914a11..f59ced5ee1 100644
> --- a/arch/arm/mach-stm32mp/Makefile
> +++ b/arch/arm/mach-stm32mp/Makefile
> @@ -11,9 +11,6 @@ ifdef CONFIG_SPL_BUILD obj-y += spl.o else obj-y +=
> bsec.o -ifndef CONFIG_STM32MP1_TRUSTED
> -obj-$(CONFIG_SYSRESET) += cmd_poweroff.o -endif endif
> obj-$(CONFIG_ARMV7_PSCI) += psci.o
> obj-$(CONFIG_$(SPL_)DM_REGULATOR) += pwr_regulator.o diff --git
> a/arch/arm/mach-stm32mp/cmd_poweroff.c b/arch/arm/mach-
> stm32mp/cmd_poweroff.c
> deleted file mode 100644
> index 62347425a0..0000000000
> --- a/arch/arm/mach-stm32mp/cmd_poweroff.c
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> -/*
> - * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
> - */
> -
> -#include <common.h>
> -#include <command.h>
> -#include <sysreset.h>
> -
> -int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{
> - int ret;
> -
> - puts("poweroff ...\n");
> - mdelay(100);
> -
> - ret = sysreset_walk(SYSRESET_POWER_OFF);
> -
> - if (ret == -EINPROGRESS)
> - mdelay(1000);
> -
> - /*NOTREACHED when power off*/
> - return CMD_RET_FAILURE;
> -}
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index
> b0cd260354..52edb29b48 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -234,6 +234,7 @@ config DM_PMIC_TPS65910 config PMIC_STPMIC1
> bool "Enable support for STMicroelectronics STPMIC1 PMIC"
> depends on DM_PMIC && DM_I2C
> + select SYSRESET_CMD_POWEROFF if CMD_POWEROFF &&
> !ARM_PSCI_FW
> ---help---
> The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power
> switches.
> It is accessed via an I2C interface. The device is used with STM32MP1
> diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig index
> 30aed2c4c1..4c883923bf 100644
> --- a/drivers/sysreset/Kconfig
> +++ b/drivers/sysreset/Kconfig
> @@ -33,6 +33,16 @@ config TPL_SYSRESET
>
> if SYSRESET
>
> +if CMD_POWEROFF
> +
> +config SYSRESET_CMD_POWEROFF
> + bool "sysreset implementation of the poweroff command"
> + help
> + This should be selected by the appropriate PMIC driver if
> + the poweroff command is enabled.
> +
> +endif
> +
> config SYSRESET_GPIO
> bool "Enable support for GPIO reset driver"
> select DM_GPIO
> diff --git a/drivers/sysreset/sysreset-uclass.c b/drivers/sysreset/sysreset-
> uclass.c
> index ad831c703a..39202588ae 100644
> --- a/drivers/sysreset/sysreset-uclass.c
> +++ b/drivers/sysreset/sysreset-uclass.c
> @@ -118,6 +118,24 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *
> const argv[])
> return 0;
> }
>
> +#if IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF)
> +int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const
> +argv[]) {
> + int ret;
> +
> + puts("poweroff ...\n");
> + mdelay(100);
> +
> + ret = sysreset_walk(SYSRESET_POWER_OFF);
> +
> + if (ret == -EINPROGRESS)
> + mdelay(1000);
> +
> + /*NOTREACHED when power off*/
> + return CMD_RET_FAILURE;
> +}
> +#endif
> +
> static int sysreset_post_bind(struct udevice *dev) { #if
> defined(CONFIG_NEEDS_MANUAL_RELOC)
> --
> 2.21.0
Regards
Patrick Delaunay
More information about the U-Boot
mailing list