[U-Boot] [PATCH v2 3/3] rk8xx: add a sysreset driver for poweroff
Urja Rannikko
urjaman at gmail.com
Thu May 16 21:48:43 UTC 2019
Based on snooping around the linux kernel rk8xx driver.
Tested on an ASUS C201.
Signed-off-by: Urja Rannikko <urjaman at gmail.com>
---
drivers/power/pmic/Kconfig | 1 +
drivers/power/pmic/rk8xx.c | 62 +++++++++++++++++++++++++++++++++++---
include/power/rk8xx_pmic.h | 4 +++
3 files changed, 63 insertions(+), 4 deletions(-)
diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
index 52edb29b48..3f6e30d503 100644
--- a/drivers/power/pmic/Kconfig
+++ b/drivers/power/pmic/Kconfig
@@ -124,6 +124,7 @@ config PMIC_PM8916
config PMIC_RK8XX
bool "Enable support for Rockchip PMIC RK8XX"
depends on DM_PMIC
+ select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
---help---
The Rockchip RK808 PMIC provides four buck DC-DC convertors, 8 LDOs,
an RTC and two low Rds (resistance (drain to source)) switches. It is
diff --git a/drivers/power/pmic/rk8xx.c b/drivers/power/pmic/rk8xx.c
index 25c339ab12..52e41051ae 100644
--- a/drivers/power/pmic/rk8xx.c
+++ b/drivers/power/pmic/rk8xx.c
@@ -6,6 +6,9 @@
#include <common.h>
#include <dm.h>
+#include <sysreset.h>
+#include <dm/device.h>
+#include <dm/lists.h>
#include <errno.h>
#include <power/rk8xx_pmic.h>
#include <power/pmic.h>
@@ -49,9 +52,9 @@ static int rk8xx_read(struct udevice *dev, uint reg, uint8_t *buff, int len)
return 0;
}
-#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
static int rk8xx_bind(struct udevice *dev)
{
+#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
ofnode regulators_node;
int children;
@@ -68,10 +71,15 @@ static int rk8xx_bind(struct udevice *dev)
if (!children)
debug("%s: %s - no child found\n", __func__, dev->name);
+#endif
+
+ if (CONFIG_IS_ENABLED(SYSRESET))
+ return device_bind_driver(dev, "rk8xx-sysreset",
+ "rk8xx-sysreset", NULL);
+
/* Always return success for this device */
return 0;
}
-#endif
static int rk8xx_probe(struct udevice *dev)
{
@@ -103,10 +111,56 @@ U_BOOT_DRIVER(pmic_rk8xx) = {
.name = "rk8xx pmic",
.id = UCLASS_PMIC,
.of_match = rk8xx_ids,
-#if CONFIG_IS_ENABLED(PMIC_CHILDREN)
.bind = rk8xx_bind,
-#endif
.priv_auto_alloc_size = sizeof(struct rk8xx_priv),
.probe = rk8xx_probe,
.ops = &rk8xx_ops,
};
+
+#if IS_ENABLED(CONFIG_SYSRESET)
+/* NOTE: Should only enable this function if the rockchip,system-power-manager
+ * property is in the device tree node, but it is there in every board that has
+ * an rk8xx in u-boot currently, so this is left as an excercise for later.
+ */
+static int rk8xx_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+ struct udevice *pmic_dev;
+ struct rk8xx_priv *priv;
+ int ret;
+ u8 bits;
+
+ if (type != SYSRESET_POWER_OFF)
+ return -EPROTONOSUPPORT;
+
+ ret = uclass_get_device_by_driver(UCLASS_PMIC,
+ DM_GET_DRIVER(pmic_rk8xx),
+ &pmic_dev);
+
+ if (ret)
+ return -EOPNOTSUPP;
+
+ priv = dev_get_priv(pmic_dev);
+
+ if (priv->variant == RK818_ID)
+ bits = DEV_OFF;
+ else
+ bits = DEV_OFF_RST;
+
+ ret = pmic_clrsetbits(pmic_dev, REG_DEVCTRL, 0, bits);
+
+ if (ret < 0)
+ return ret;
+
+ return -EINPROGRESS;
+}
+
+static struct sysreset_ops rk8xx_sysreset_ops = {
+ .request = rk8xx_sysreset_request,
+};
+
+U_BOOT_DRIVER(rk8xx_sysreset) = {
+ .name = "rk8xx-sysreset",
+ .id = UCLASS_SYSRESET,
+ .ops = &rk8xx_sysreset_ops,
+};
+#endif
diff --git a/include/power/rk8xx_pmic.h b/include/power/rk8xx_pmic.h
index c06248f751..565b35985e 100644
--- a/include/power/rk8xx_pmic.h
+++ b/include/power/rk8xx_pmic.h
@@ -177,6 +177,10 @@ enum {
#define RK8XX_ID_MSK 0xfff0
+/* DEVCTRL bits for poweroff */
+#define DEV_OFF_RST BIT(3)
+#define DEV_OFF BIT(0)
+
struct rk8xx_reg_table {
char *name;
u8 reg_ctl;
--
2.21.0
More information about the U-Boot
mailing list