[U-Boot] [PATCH v2 2/3] sysreset: move stm32mp sysreset poweroff implementation to sysreset uclass

[Patrice CHOTARD]

Hi Urja

On 5/16/19 11:48 PM, Urja Rannikko wrote:
> This is a generic implementation. Add CONFIG_SYSRESET_CMD_POWEROFF
> to signal when we need it. Enable it from the STPMIC1 config and in
> sandbox.
> 
> The config flag is transitionary, that is it can be removed after all
> poweroff implementations use sysreset, and just have CMD_POWEROFF depend
> on sysreset.
> 
> Signed-off-by: Urja Rannikko <urjaman at gmail.com>
> ---
> v2: Fixup STPMIC1 config selection of CONFIG_SYSRESET_CMD_POWEROFF
> ---
>  arch/Kconfig                         |  1 +
>  arch/arm/mach-stm32mp/Makefile       |  3 ---
>  arch/arm/mach-stm32mp/cmd_poweroff.c | 24 ------------------------
>  drivers/power/pmic/Kconfig           |  1 +
>  drivers/sysreset/Kconfig             | 10 ++++++++++
>  drivers/sysreset/sysreset-uclass.c   | 18 ++++++++++++++++++
>  6 files changed, 30 insertions(+), 27 deletions(-)
>  delete mode 100644 arch/arm/mach-stm32mp/cmd_poweroff.c
> 
> diff --git a/arch/Kconfig b/arch/Kconfig
> index 239289b885..83ff21dfd7 100644
> --- a/arch/Kconfig
> +++ b/arch/Kconfig
> @@ -91,6 +91,7 @@ config SANDBOX
>  	select LZO
>  	select SPI
>  	select SUPPORT_OF_CONTROL
> +	select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
>  	imply BITREVERSE
>  	select BLOBLIST
>  	imply CMD_DM
> diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
> index 1493914a11..f59ced5ee1 100644
> --- a/arch/arm/mach-stm32mp/Makefile
> +++ b/arch/arm/mach-stm32mp/Makefile
> @@ -11,9 +11,6 @@ ifdef CONFIG_SPL_BUILD
>  obj-y += spl.o
>  else
>  obj-y += bsec.o
> -ifndef CONFIG_STM32MP1_TRUSTED
> -obj-$(CONFIG_SYSRESET) += cmd_poweroff.o
> -endif
>  endif
>  obj-$(CONFIG_ARMV7_PSCI) += psci.o
>  obj-$(CONFIG_$(SPL_)DM_REGULATOR) += pwr_regulator.o
> diff --git a/arch/arm/mach-stm32mp/cmd_poweroff.c b/arch/arm/mach-stm32mp/cmd_poweroff.c
> deleted file mode 100644
> index 62347425a0..0000000000
> --- a/arch/arm/mach-stm32mp/cmd_poweroff.c
> +++ /dev/null
> @@ -1,24 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
> -/*
> - * Copyright (C) 2019, STMicroelectronics - All Rights Reserved
> - */
> -
> -#include <common.h>
> -#include <command.h>
> -#include <sysreset.h>
> -
> -int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> -{
> -	int ret;
> -
> -	puts("poweroff ...\n");
> -	mdelay(100);
> -
> -	ret = sysreset_walk(SYSRESET_POWER_OFF);
> -
> -	if (ret == -EINPROGRESS)
> -		mdelay(1000);
> -
> -	/*NOTREACHED when power off*/
> -	return CMD_RET_FAILURE;
> -}
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> index b0cd260354..52edb29b48 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -234,6 +234,7 @@ config DM_PMIC_TPS65910
>  config PMIC_STPMIC1
>  	bool "Enable support for STMicroelectronics STPMIC1 PMIC"
>  	depends on DM_PMIC && DM_I2C
> +	select SYSRESET_CMD_POWEROFF if CMD_POWEROFF && !ARM_PSCI_FW
>  	---help---
>  	The STPMIC1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF and 2 power switches.
>  	It is accessed via an I2C interface. The device is used with STM32MP1
> diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
> index 30aed2c4c1..4c883923bf 100644
> --- a/drivers/sysreset/Kconfig
> +++ b/drivers/sysreset/Kconfig
> @@ -33,6 +33,16 @@ config TPL_SYSRESET
>  
>  if SYSRESET
>  
> +if CMD_POWEROFF
> +
> +config SYSRESET_CMD_POWEROFF
> +	bool "sysreset implementation of the poweroff command"
> +	help
> +	  This should be selected by the appropriate PMIC driver if
> +	  the poweroff command is enabled.
> +
> +endif
> +
>  config SYSRESET_GPIO
>  	bool "Enable support for GPIO reset driver"
>  	select DM_GPIO
> diff --git a/drivers/sysreset/sysreset-uclass.c b/drivers/sysreset/sysreset-uclass.c
> index ad831c703a..39202588ae 100644
> --- a/drivers/sysreset/sysreset-uclass.c
> +++ b/drivers/sysreset/sysreset-uclass.c
> @@ -118,6 +118,24 @@ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
>  	return 0;
>  }
>  
> +#if IS_ENABLED(CONFIG_SYSRESET_CMD_POWEROFF)
> +int do_poweroff(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> +	int ret;
> +
> +	puts("poweroff ...\n");
> +	mdelay(100);
> +
> +	ret = sysreset_walk(SYSRESET_POWER_OFF);
> +
> +	if (ret == -EINPROGRESS)
> +		mdelay(1000);
> +
> +	/*NOTREACHED when power off*/
> +	return CMD_RET_FAILURE;
> +}
> +#endif
> +
>  static int sysreset_post_bind(struct udevice *dev)
>  {
>  #if defined(CONFIG_NEEDS_MANUAL_RELOC)
> 

Reviewed-by: Patrice Chotard <patrice.chotard at st.com>

Thanks