[U-Boot] [PATCH 2/5] colibri-imx6ull: use UUID for rootfs
Marcel Ziswiler
marcel.ziswiler at toradex.com
Fri May 24 07:46:44 UTC 2019
On Mon, 2019-05-13 at 12:15 +0300, Igor Opaniuk wrote:
> Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
> partition. This fixes the issue, when MMC controllers are probed in
> a different order in U-boot and Linux kernel.
>
> Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> ---
> include/configs/colibri-imx6ull.h | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/include/configs/colibri-imx6ull.h
> b/include/configs/colibri-imx6ull.h
> index 7cf550cf9e..2ba0ce5b79 100644
> --- a/include/configs/colibri-imx6ull.h
> +++ b/include/configs/colibri-imx6ull.h
> @@ -66,12 +66,17 @@
> "run fdt_fixup && bootz ${kernel_addr_r} -
> ${fdt_addr_r}\0" \
>
> #define SD_BOOTCMD \
> - "sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
> - "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
> + "set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0"
> \
> + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
> + "setenv bootargs ${defargs} ${sdargs} " \
> "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
> - "load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
> - "load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
> + "load mmc ${sddev}:${sdbootpart} ${kernel_addr_r}
> ${kernel_file} && " \
> + "load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " &&
> " \
> "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
> + "sdbootpart=1\0" \
> + "sddev=0\0" \
> + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
> + "sdrootpart=2\0"
>
> #define UBI_BOOTCMD \
> "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
More information about the U-Boot
mailing list