[U-Boot] [PATCH v2 2/5] colibri-imx6ull: use UUID for rootfs

[Igor Opaniuk]

From: Igor Opaniuk <igor.opaniuk at toradex.com>

Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
partition. This fixes the issue, when MMC controllers are probed in
a different order in U-boot and Linux kernel.

Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
---
 include/configs/colibri-imx6ull.h | 13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 7cf550cf9e..2ba0ce5b79 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -66,12 +66,17 @@
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
 #define SD_BOOTCMD \
-	"sdargs=root=/dev/mmcblk0p2 ro rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
+	"set_sdargs=setenv sdargs root=PARTUUID=${uuid} ro rootwait\0" \
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+	"setenv bootargs ${defargs} ${sdargs} " \
 	"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
-	"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
-	"load mmc 0:1 ${fdt_addr_r} " FDT_FILE " && " \
+	"load mmc ${sddev}:${sdbootpart} ${kernel_addr_r} ${kernel_file} && " \
+	"load mmc ${sddev}:${sdbootpart} ${fdt_addr_r} " FDT_FILE " && " \
 	"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
+	"sdbootpart=1\0" \
+	"sddev=0\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
 
 #define UBI_BOOTCMD \
 	"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rw rootfstype=ubifs " \
-- 
2.17.1