[U-Boot] [EXT] Re: [PATCH v2] mtd: spi: Improve spi_nor_write_data() implementation

Ashish Kumar ashish.kumar at nxp.com
Fri May 17 07:49:33 UTC 2019



> -----Original Message-----
> From: Vignesh Raghavendra <vigneshr at ti.com>
> Sent: Wednesday, April 17, 2019 6:18 PM
> To: Rajat Srivastava <rajat.srivastava at nxp.com>; u-boot at lists.denx.de;
> trini at konsulko.com; marek.vasut at gmail.com;
> marek.vasut+renesas at gmail.com; jagan at openedev.com
> Cc: Ashish Kumar <ashish.kumar at nxp.com>
> Subject: [EXT] Re: [PATCH v2] mtd: spi: Improve spi_nor_write_data()
> implementation
> 
> WARNING: This email was created outside of NXP. DO NOT CLICK links or
> attachments unless you recognize the sender and know the content is safe.
> 
> 
> 
> On 16/04/19 5:29 PM, Rajat Srivastava wrote:
> > Maximum write size in a single write operation in
> > spi_nor_write_data() function can be equal to slave tx buffer, which
> > is adjusted in spi_mem_adjust_op_size() and write operation gets
> > fragmented.
> >
> > Previously data write for the above fragmentation didn't incorporate
> > write enable and status checks.
> > It was sent to flash at page offsets only.
> >
> > Signed-off-by: Rajat Srivastava <rajat.srivastava at nxp.com>
> > ---
> > Changes in v2:
> >   Incorporating review comments given by Vignesh.
> >   [PATCH v1]:
> > https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpatc
> >
> hwork.ozlabs.org%2Fpatch%2F1078183%2F&data=02%7C01%7Cashish.
> kumar%
> >
> 40nxp.com%7C774c432160da4264b0a308d6c332e381%7C686ea1d3bc2b4c6
> fa92cd99
> >
> c5c301635%7C0%7C0%7C636911020672697602&sdata=EK3zMXmkMdl
> cft04mh8GK
> > EkX6G8JpImEk7YK1SH%2FxQ8%3D&reserved=0
> 
> Changes look good as such, but I cannot seem to apply these patch locally as
> mbox for testing. Looking at mail source, it seems to be sent in binary format
> instead of plain text. Could you resend in plain text?

Hi Vignesh

Is this taken care now, plain text version was posted here
http://patchwork.ozlabs.org/patch/1090121/

Regards
Ashish 

> 
> >
> >   drivers/mtd/spi/spi-nor-core.c | 28 ++++++++++------------------
> >   1 file changed, 10 insertions(+), 18 deletions(-)
> >
> > diff --git a/drivers/mtd/spi/spi-nor-core.c
> > b/drivers/mtd/spi/spi-nor-core.c index c4e2f6a08f..8e754d445d 100644
> > --- a/drivers/mtd/spi/spi-nor-core.c
> > +++ b/drivers/mtd/spi/spi-nor-core.c
> > @@ -116,7 +116,6 @@ static ssize_t spi_nor_write_data(struct spi_nor
> *nor, loff_t to, size_t len,
> >                                  SPI_MEM_OP_ADDR(nor->addr_width, to, 1),
> >                                  SPI_MEM_OP_NO_DUMMY,
> >                                  SPI_MEM_OP_DATA_OUT(len, buf, 1));
> > -     size_t remaining = len;
> >       int ret;
> >
> >       /* get transfer protocols. */
> > @@ -127,22 +126,19 @@ static ssize_t spi_nor_write_data(struct spi_nor
> *nor, loff_t to, size_t len,
> >       if (nor->program_opcode == SPINOR_OP_AAI_WP && nor-
> >sst_write_second)
> >               op.addr.nbytes = 0;
> >
> > -     while (remaining) {
> > -             op.data.nbytes = remaining < UINT_MAX ? remaining : UINT_MAX;
> > -             ret = spi_mem_adjust_op_size(nor->spi, &op);
> > -             if (ret)
> > -                     return ret;
> > +     op.data.nbytes = len < UINT_MAX ? len : UINT_MAX;
> > +     ret = spi_mem_adjust_op_size(nor->spi, &op);
> > +     if (ret)
> > +             return ret;
> >
> > -             ret = spi_mem_exec_op(nor->spi, &op);
> > -             if (ret)
> > -                     return ret;
> > +     ret = spi_mem_exec_op(nor->spi, &op);
> > +     if (ret)
> > +             return ret;
> >
> > -             op.addr.val += op.data.nbytes;
> > -             remaining -= op.data.nbytes;
> > -             op.data.buf.out += op.data.nbytes;
> > -     }
> > +     op.addr.val += op.data.nbytes;
> > +     op.data.buf.out += op.data.nbytes;
> >
> > -     return len;
> > +     return op.data.nbytes;
> >   }
> >
> >   /*
> > @@ -1101,10 +1097,6 @@ static int spi_nor_write(struct mtd_info *mtd,
> loff_t to, size_t len,
> >                       goto write_err;
> >               *retlen += written;
> >               i += written;
> > -             if (written != page_remain) {
> > -                     ret = -EIO;
> > -                     goto write_err;
> > -             }
> >       }
> >
> >   write_err:
> >


More information about the U-Boot mailing list