[U-Boot] [v4 PATCH] RISCV: image: Add booti support

[Atish Patra]

On 5/6/19 2:27 PM, Tom Rini wrote:
> On Mon, May 06, 2019 at 11:10:57PM +0200, Heinrich Schuchardt wrote:
>> On 5/6/19 10:39 PM, Karsten Merker wrote:
>>> On Mon, May 06, 2019 at 10:06:39PM +0200, Heinrich Schuchardt wrote:
>>>> On 5/6/19 8:11 PM, Atish Patra wrote:
>>>>> This patch adds booti support for RISC-V Linux kernel. The existing
>>>>> bootm method will also continue to work as it is.
>>> [...]
>>>>> +	"boot arm64/riscv Linux Image image from memory", booti_help_text
>>>>
>>>> %s/Image image/image/
>>>>
>>>> "arm64/riscv" is distracting. If I am on RISC-V I cannot boot an ARM64
>>>> image here. Remove the reference to the architecture, please.
>>>
>>> Hello,
>>>
>>> I'm not sure about the last point - ISTR (please correct me if my
>>> memory betrays me here) that an arm64 U-Boot can in principle be
>>> used to boot either an arm64 or an armv7 kernel, but the commands
>>> are different in those cases (booti for an arm64 "Image" format
>>> kernel and bootz for an armv7 "zImage" format kernel), so having
>>> the information which kernel format is supported by the
>>> respective commands appears useful to me.  If the arm64 kernel
>>> image format would have a distinctive name (like "zImage" on
>>> armv7 or "bzImage" on x86) that would be less problematic, but
>>> with the confusion potential of "boot a Linux Image" (as in the
>>> arm64/riscv-specific "Image" format) vs "boot a Linux image" (as
>>> in generally some form of kernel image), I think explicitly
>>> mentioning the supported architectures makes sense.
>>
>> In this case you have to ensure that only the *supported* architectures
>> are mentioned. RISC-V is not supported on ARM64.
> 
> The help should be re-worded to be both architecture agnostic and clear
> that it is for the Linux Kernel 'Image' format images.
> 
Done.

Regards,
Atish