[U-Boot] [PATCH 1/3] rk3399: orangepi: Enable TPL

Jagan Teki jagan at amarulasolutions.com
Thu May 9 10:57:44 UTC 2019


Enable TPL for OrangePI rk3399 board.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 configs/orangepi-rk3399_defconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
index 3f02c89983..90021bb695 100644
--- a/configs/orangepi-rk3399_defconfig
+++ b/configs/orangepi-rk3399_defconfig
@@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SYS_MALLOC_F_LEN=0x4000
 CONFIG_ROCKCHIP_RK3399=y
-CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
+CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SPL_STACK_R_ADDR=0x80000
@@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_TEXT_BASE=0xff8c2000
 CONFIG_SPL_STACK_R=y
-CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
@@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
+CONFIG_TPL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
@@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
 CONFIG_USB_ETHER_RTL8152=y
 CONFIG_USB_ETHER_SMSC95XX=y
 CONFIG_USE_TINY_PRINTF=y
+CONFIG_SPL_TINY_MEMSET=y
 CONFIG_ERRNO_STR=y
-- 
2.18.0.321.gffc6fa0e3



More information about the U-Boot mailing list