[U-Boot] [PATCH 1/3] watchdog: bcm6345: callback start use tick instead of ms

Stefan Roese sr at denx.de
Mon May 6 07:33:41 UTC 2019


On 03.05.19 19:43, Philippe Reynes wrote:
> The function bcm6345_wdt_start use the argument timeout
> as tick but it should be used as milliseconds.
> 
> A clock is added as requirement for this driver.
> The frequency of the clock is then used to convert the
> millisecond to ticks in the function bcm6345_wdt_start.
> 
> Signed-off-by: Philippe Reynes <philippe.reynes at softathome.com>

You might want to emphasize, that this is a pretty severe fix to
this driver, as without this patch, boards using this driver will
end in a endless reboot loop. So it should be applied to this
release.

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   drivers/watchdog/bcm6345_wdt.c | 21 ++++++++++++++++-----
>   1 file changed, 16 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/watchdog/bcm6345_wdt.c b/drivers/watchdog/bcm6345_wdt.c
> index 44f5662..9f14e7d 100644
> --- a/drivers/watchdog/bcm6345_wdt.c
> +++ b/drivers/watchdog/bcm6345_wdt.c
> @@ -10,6 +10,7 @@
>   #include <common.h>
>   #include <dm.h>
>   #include <wdt.h>
> +#include <clk.h>
>   #include <asm/io.h>
>   
>   /* WDT Value register */
> @@ -26,6 +27,7 @@
>   
>   struct bcm6345_wdt_priv {
>   	void __iomem *regs;
> +	unsigned long clk_rate;
>   };
>   
>   static int bcm6345_wdt_reset(struct udevice *dev)
> @@ -41,16 +43,17 @@ static int bcm6345_wdt_reset(struct udevice *dev)
>   static int bcm6345_wdt_start(struct udevice *dev, u64 timeout, ulong flags)
>   {
>   	struct bcm6345_wdt_priv *priv = dev_get_priv(dev);
> +	u32 val = priv->clk_rate / 1000 * timeout;
>   
> -	if (timeout < WDT_VAL_MIN) {
> +	if (val < WDT_VAL_MIN) {
>   		debug("watchdog won't fire with less than 2 ticks\n");
> -		timeout = WDT_VAL_MIN;
> -	} else if (timeout > WDT_VAL_MAX) {
> +		val = WDT_VAL_MIN;
> +	} else if (val > WDT_VAL_MAX) {
>   		debug("maximum watchdog timeout exceeded\n");
> -		timeout = WDT_VAL_MAX;
> +		val = WDT_VAL_MAX;
>   	}
>   
> -	writel(timeout, priv->regs + WDT_VAL_REG);
> +	writel(val, priv->regs + WDT_VAL_REG);
>   
>   	return bcm6345_wdt_reset(dev);
>   }
> @@ -85,11 +88,19 @@ static const struct udevice_id bcm6345_wdt_ids[] = {
>   static int bcm6345_wdt_probe(struct udevice *dev)
>   {
>   	struct bcm6345_wdt_priv *priv = dev_get_priv(dev);
> +	struct clk clk;
> +	int ret;
>   
>   	priv->regs = dev_remap_addr(dev);
>   	if (!priv->regs)
>   		return -EINVAL;
>   
> +	ret = clk_get_by_index(dev, 0, &clk);
> +	if (!ret)
> +		priv->clk_rate = clk_get_rate(&clk);
> +	else
> +		return -EINVAL;
> +
>   	bcm6345_wdt_stop(dev);
>   
>   	return 0;
> 

Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list