[U-Boot] [PATCH] ARM: imx: apalis_imx6: Drop ad-hoc SATA binding

[Marek Vasut]

Drop the ad-hoc AHCI binding code, this is superseded by
CONFIG_DWC_AHSATA_AHCI=y resp. drivers/ata/dwc_ahsata.c

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Cc: Max Krummenacher <max.krummenacher at toradex.com>
Cc: Stefan Agner <stefan.agner at toradex.com>
Cc: Stefano Babic <sbabic at denx.de>
---
 board/toradex/apalis_imx6/apalis_imx6.c | 49 -------------------------
 1 file changed, 49 deletions(-)

diff --git a/board/toradex/apalis_imx6/apalis_imx6.c b/board/toradex/apalis_imx6/apalis_imx6.c
index 3e59185438..b502d4ef13 100644
--- a/board/toradex/apalis_imx6/apalis_imx6.c
+++ b/board/toradex/apalis_imx6/apalis_imx6.c
@@ -1131,52 +1131,3 @@ U_BOOT_DEVICE(mxc_serial) = {
 	.name = "serial_mxc",
 	.platdata = &mxc_serial_plat,
 };
-
-#if CONFIG_IS_ENABLED(AHCI)
-static int sata_imx_probe(struct udevice *dev)
-{
-	int i, err;
-
-	for (i = 0; i < APALIS_IMX6_SATA_INIT_RETRIES; i++) {
-		err = setup_sata();
-		if (err) {
-			printf("SATA setup failed: %d\n", err);
-			return err;
-		}
-
-		udelay(100);
-
-		err = dwc_ahsata_probe(dev);
-		if (!err)
-			break;
-
-		/* There is no device on the SATA port */
-		if (sata_dm_port_status(0, 0) == 0)
-			break;
-
-		/* There's a device, but link not established. Retry */
-		device_remove(dev, DM_REMOVE_NORMAL);
-	}
-
-	return 0;
-}
-
-struct ahci_ops sata_imx_ops = {
-	.port_status = dwc_ahsata_port_status,
-	.reset	= dwc_ahsata_bus_reset,
-	.scan	= dwc_ahsata_scan,
-};
-
-static const struct udevice_id sata_imx_ids[] = {
-	{ .compatible = "fsl,imx6q-ahci" },
-	{ }
-};
-
-U_BOOT_DRIVER(sata_imx) = {
-	.name		= "dwc_ahci",
-	.id		= UCLASS_AHCI,
-	.of_match	= sata_imx_ids,
-	.ops		= &sata_imx_ops,
-	.probe		= sata_imx_probe,
-};
-#endif /* AHCI */
-- 
2.20.1