[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

Thu May 23 14:47:59 UTC 2019

Hi

On Thu, May 23, 2019 at 4:33 PM Tom Rini <trini at konsulko.com> wrote:
>
> On Thu, May 23, 2019 at 02:08:23PM +0000, Abel Vesa wrote:
> > On 19-05-23 09:59:05, Tom Rini wrote:
> > > On Thu, May 23, 2019 at 10:49:11AM -0300, Fabio Estevam wrote:
> > > > Hi Peng,
> > > >
> > > > On Tue, May 21, 2019 at 10:38 PM Peng Fan <peng.fan at nxp.com> wrote:
> > > >
> > > > > > I will send a v2 removing CONFIG_SPL_DM.
> > > > >
> > > > > So what is the real direction moving to use SPL driver, non-dm is allowed in future?
> > > >
> > > > We are very limited in space when CONFIG_SPL_DM is used on imx6q-sabresd.
> > > >
> > > > With CONFIG_SPL_DM selected the size increase due to the three dtb's
> > > > is about 8kB.
> > > >
> > > > Even with CONFIG_SPL_DM disabled we ony have 1kB of free space, so I
> > > > still want to optimize the size further.
> > >
> > > So with CONFIG_SPL_DM we're overflowing by ~7kB?
> >
> > Well, the mandatory requirements here are as follow (AFAIK):
> > 1. keep one binary for all imx6dl imx6[qp|dl|q]-sabresd
> > 2. have DM support in SPL
> >
> > So I guess we have to either prioritize the other needed configs and
> > leave out the one we can do without. That, ofcourse, if we still want
> > to fit in and we still want one binary for all three sabresd boards.
>
> Well, no, you don't have to use DM in SPL.  But what I'm wondering is if
> we need qp/dl/q specific information at the SPL stage or if that can
> wait until we're doing the real U-Boot.
>

Is dcd table take space?

Michael

> --
> Tom
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot

-- 
| Michael Nazzareno Trimarchi                     Amarula Solutions BV |
| COO  -  Founder                                      Cruquiuskade 47 |
| +31(0)851119172                                 Amsterdam 1018 AM NL |
|                  [`as] http://www.amarulasolutions.com               |