[U-Boot] [RESEND][PATCH v2] armv8: Add workaround for USB erratum A-050106

[Ran Wang]

USB3.0 Receiver needs to enable fixed equalization
for each of PHY instances in an SOC. This is similar
to erratum A-009007, but this one is for LX2160A,
and the register value is different.

Signed-off-by: Ran Wang <ran.wang_1 at nxp.com>
---
Change in v2:
	- Move function erratum_a050106() under the scope of
	  CONFIG_FSL_LSCH3 to avoid compilation warning of
	  'defined but not used'.

 arch/arm/cpu/armv8/fsl-layerscape/Kconfig              |  4 ++++
 arch/arm/cpu/armv8/fsl-layerscape/soc.c                | 13 ++++++++++++-
 arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h |  5 +++++
 3 files changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
index f48481f..f99b9d1 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Kconfig
@@ -191,6 +191,7 @@ config ARCH_LX2160A
 	select SYS_FSL_DDR_VER_50
 	select SYS_FSL_EC1
 	select SYS_FSL_EC2
+	select SYS_FSL_ERRATUM_A050106
 	select SYS_FSL_HAS_RGMII
 	select SYS_FSL_HAS_SEC
 	select SYS_FSL_HAS_CCN508
@@ -335,6 +336,9 @@ config SYS_FSL_ERRATUM_A009008
 config SYS_FSL_ERRATUM_A009798
 	bool "Workaround for USB PHY erratum A009798"
 
+config SYS_FSL_ERRATUM_A050106
+	bool "Workaround for USB PHY erratum A050106"
+
 config SYS_FSL_ERRATUM_A010315
 	bool "Workaround for PCIe erratum A010315"
 
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/soc.c b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
index 06f3edb..ab5c408 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/soc.c
+++ b/arch/arm/cpu/armv8/fsl-layerscape/soc.c
@@ -139,7 +139,8 @@ static void erratum_a008997(void)
 	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_3);	\
 	out_be16((phy) + SCFG_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_4)
 
-#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
+#elif defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A) || \
+	defined(CONFIG_ARCH_LX2160A)
 
 #define PROGRAM_USB_PHY_RX_OVRD_IN_HI(phy)	\
 	out_le16((phy) + DCSR_USB_PHY_RX_OVRD_IN_HI, USB_PHY_RX_EQ_VAL_1); \
@@ -172,6 +173,15 @@ static void erratum_a009007(void)
 }
 
 #if defined(CONFIG_FSL_LSCH3)
+static void erratum_a050106(void)
+{
+#if defined(CONFIG_ARCH_LX2160A)
+	void __iomem *dcsr = (void __iomem *)DCSR_BASE;
+
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY1);
+	PROGRAM_USB_PHY_RX_OVRD_IN_HI(dcsr + DCSR_USB_PHY2);
+#endif
+}
 /*
  * This erratum requires setting a value to eddrtqcr1 to
  * optimal the DDR performance.
@@ -323,6 +333,7 @@ void fsl_lsch3_early_init_f(void)
 	erratum_a009798();
 	erratum_a008997();
 	erratum_a009007();
+	erratum_a050106();
 #ifdef CONFIG_CHAIN_OF_TRUST
 	/* In case of Secure Boot, the IBR configures the SMMU
 	* to allow only Secure transactions.
diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
index 9fab88a..5727656 100644
--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
+++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h
@@ -209,8 +209,13 @@
 #define DCSR_USB_PHY_RX_OVRD_IN_HI	0x200C
 #define USB_PHY_RX_EQ_VAL_1		0x0000
 #define USB_PHY_RX_EQ_VAL_2		0x0080
+#if defined(CONFIG_ARCH_LS2080A) || defined(CONFIG_ARCH_LS1088A)
 #define USB_PHY_RX_EQ_VAL_3		0x0380
 #define USB_PHY_RX_EQ_VAL_4		0x0b80
+#elif defined(CONFIG_ARCH_LX2160A)
+#define USB_PHY_RX_EQ_VAL_3		0x0080
+#define USB_PHY_RX_EQ_VAL_4		0x0880
+#endif
 
 #define TP_ITYP_AV		0x00000001	/* Initiator available */
 #define TP_ITYP_TYPE(x)	(((x) & 0x6) >> 1)	/* Initiator Type */
-- 
2.7.4