[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Shyam Saini]

Hi Schrempf,

As of now imx usb loader does not process FIT images.
Have you added some patch or support on imx usb loader side ?

Thanks and regards,
Shyam

On Mon, May 27, 2019 at 12:10 PM Schrempf Frieder
<frieder.schrempf at kontron.de> wrote:
>
> Hi Fabio,
>
> On 23.05.19 19:45, Fabio Estevam wrote:
> > Hi Schrempf,
> >
> > On Thu, May 23, 2019 at 2:26 PM Schrempf Frieder
> > <frieder.schrempf at kontron.de> wrote:
> >
> >> As luck would have it, I needed to load a FIT via SDP today, so I came
> >> up with a quick patch (see below). There are probably better ways to do
> >> this, but it works.
> >
> > Thanks for your patch!
> >
> > I would like to give it a try, but it does not apply against U-Boot mainline.
> >
> > I manually applied it, but failed to build:
> >
> > cmd/usb_gadget_sdp.c: In function ‘do_sdp’:
> > cmd/usb_gadget_sdp.c:35:2: error: too few arguments to function ‘sdp_handle’
> >    sdp_handle(controller_index);
>
> Sorry, I just picked the patch from my messy working tree and it's based
> on 2019.04 and some other changes.
>
> > Could you please rebase it against U-Boot mainline and post it like a
> > formal patch?
>
> I need to do some rebasing and cleanup, but I'm definitely planning to
> send this as a patch for upstream.
>
> Thanks,
> Frieder
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> https://lists.denx.de/listinfo/u-boot