[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Peng Fan]

Hi Jagan
> Subject: Re: Cannot boot mx6qsabred with 2019.07-rc2
> 
> On Thu, May 23, 2019 at 10:18 PM Fabio Estevam <festevam at gmail.com>
> wrote:
> >
> > On Thu, May 23, 2019 at 1:11 PM Jagan Teki <jagan at amarulasolutions.com>
> wrote:
> >
> > > Don't know whether this is SPL size issue or not? can you try
> > > SPL_OF_PLATDATA and TINY* I can see the size reduced with 64512
> > > bytes (one build issue on fdtdec_get_int undefined)
> >
> > Yes, it does not build with CONFIG_SPL_OF_PLATDATA:
> >
> > lib/built-in.o: In function `fdtdec_parse_phandle_with_args':
> > /home/fabio/u-boot/lib/fdtdec.c:788: undefined reference to
> `fdtdec_get_int'
> 
> Couldn't dig much here, would be happy someone can find this?
> 
> > drivers/built-in.o: In function `fsl_esdhc_probe':
> > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1480: undefined reference
> > to `fdtdec_get_int'
> > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1482: undefined reference
> > to `fdtdec_get_int'
> > /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1485: undefined reference
> 
> These we can fix, by supporting platdata support into driver.
> 
> > to `fdtdec_get_int'
> > scripts/Makefile.spl:404: recipe for target 'spl/u-boot-spl' failed
> > make[1]: *** [spl/u-boot-spl] Error 1
> >
> > Thanks for the suggestions, but at this point I prefer to go with the
> > removal of CONFIG_SPL_DM.
> 
> We have 45 days to release, I think we can make these fixes quite normally
> what do you think? fsl_esdhc.c build I can mark a patch in few days if
> required.

Are you working on converting the driver to support OF_PLATDATA?

Regards,
Peng.

> 
> >
> > For 2019.07 it would be really nice if we could fix these two issues:
> >
> > 1. Allow to load a FIT image via Serial Download Protocol
> >
> > 2. Detect the SPL size overflow in build-time
> 
> 1) We are working on this, 2) can be done.