[U-Boot] [PATCH] armv8: ls1028ardb: Add sd and emmc related environments
Yuantian Tang
andy.tang at nxp.com
Tue May 14 08:53:30 UTC 2019
Add SD and EMMC environments to faciliate the boot.
Signed-off-by: Yuantian Tang <andy.tang at nxp.com>
---
include/configs/ls1028a_common.h | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 10f2e88bfd..9531548184 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -127,15 +127,24 @@
"${scripthdraddr} ${prefix}${boot_script_hdr} " \
"&& esbc_validate ${scripthdraddr};" \
"source ${scriptaddr}\0" \
- "sd_bootcmd=echo Trying load from SD ..;" \
+ "xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+ "sf probe 0:0 && sf read $load_addr " \
+ "$kernel_start $kernel_size ; env exists secureboot &&" \
+ "sf read $kernelheader_addr_r $kernelheader_start " \
+ "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+ " bootm $load_addr#$board\0" \
+ "sd_bootcmd=echo Trying load from SD ...;" \
"mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd && " \
"env exists secureboot && mmc read $kernelheader_addr_r " \
"$kernelhdr_addr_sd $kernelhdr_size_sd " \
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$board\0" \
- "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
- "mmcinfo;mmc read $load_addr 0x4800 0x200 " \
+ "xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+ "sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+ "&& hdp load $load_addr 0x2000\0" \
+ "sd_hdploadcmd=echo Trying load HDP firmware from SD..;" \
+ "mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
"&& hdp load $load_addr 0x2000\0" \
"emmc_bootcmd=echo Trying load from EMMC ..;" \
"mmcinfo; mmc dev 1; mmc read $load_addr " \
@@ -145,7 +154,7 @@
" && esbc_validate ${kernelheader_addr_r};" \
"bootm $load_addr#$board\0" \
"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;" \
- "mmc dev 1;mmcinfo;mmc read $load_addr 0x4800 0x200 " \
+ "mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 " \
"&& hdp load $load_addr 0x2000\0"
#undef CONFIG_BOOTCOMMAND
--
2.17.1
More information about the U-Boot
mailing list