[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2
Fabio Estevam
festevam at gmail.com
Wed May 22 14:23:11 UTC 2019
On Tue, May 21, 2019 at 11:34 PM Tom Rini <trini at konsulko.com> wrote:
> As came up in another thread, CONFIG_MMC_TINY may be more widely useable
> and should help with space.
How it can be used exactly?
I tried it like this:
--- a/configs/mx6sabresd_defconfig
+++ b/configs/mx6sabresd_defconfig
@@ -6,7 +6,6 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_MX6SABRESD=y
-CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_SPL=y
@@ -100,3 +99,4 @@ CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
CONFIG_DM_VIDEO=y
CONFIG_VIDEO_IPUV3=y
+CONFIG_SPL_MMC_TINY=y
, but the board does not boot:
U-Boot SPL 2019.07-rc2-00164-ge1a2ed7180-dirty (May 22 2019 - 11:19:41 -0300)
SPL: Unsupported Boot Device!
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
More information about the U-Boot
mailing list