[U-Boot] [PATCH 08/14] mmc: am654_sdhci: Separate J721E compatible into 8bit and 4bit versions
Lokesh Vutla
lokeshvutla at ti.com
Wed May 22 18:37:01 UTC 2019
From: Faiz Abbas <faiz_abbas at ti.com>
The j721e 4 bit instances don't have a hard DLL and therefore don't need
any DLL related configurations. Split the compatibles into an 8 bit and a
4 bit one. Add a private flags field which can be used to check if the
DLL is present and don't register the set_ios_post callback for the 4 bit
compatible instances.
Also update the compatibles in k3-j721e-main.dtsi to avoid breaking boot
with the new compatibles.
Signed-off-by: Faiz Abbas <faiz_abbas at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
drivers/mmc/am654_sdhci.c | 114 ++++++++++++++++++++++++--------------
1 file changed, 71 insertions(+), 43 deletions(-)
diff --git a/drivers/mmc/am654_sdhci.c b/drivers/mmc/am654_sdhci.c
index cc62120718..ceb5584751 100644
--- a/drivers/mmc/am654_sdhci.c
+++ b/drivers/mmc/am654_sdhci.c
@@ -73,6 +73,8 @@ struct am654_sdhci_plat {
u32 otap_del_sel;
u32 trm_icp;
u32 drv_strength;
+ u32 flags;
+#define DLL_PRESENT (1 << 0)
bool dll_on;
};
@@ -163,6 +165,10 @@ const struct sdhci_ops am654_sdhci_ops = {
.set_control_reg = &am654_sdhci_set_control_reg,
};
+const struct sdhci_ops j721e_4bit_sdhci_ops = {
+ .set_control_reg = &am654_sdhci_set_control_reg,
+};
+
int am654_sdhci_init(struct am654_sdhci_plat *plat)
{
u32 ctl_cfg_2 = 0;
@@ -173,24 +179,28 @@ int am654_sdhci_init(struct am654_sdhci_plat *plat)
mask = OTAPDLYENA_MASK | OTAPDLYSEL_MASK;
regmap_update_bits(plat->base, PHY_CTRL4, mask, 0x0);
- regmap_read(plat->base, PHY_STAT1, &val);
- if (~val & CALDONE_MASK) {
- /* Calibrate IO lines */
- regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK, PDB_MASK);
- ret = regmap_read_poll_timeout(plat->base, PHY_STAT1, val,
- val & CALDONE_MASK, 1, 20);
- if (ret)
- return ret;
- }
+ if (plat->flags & DLL_PRESENT) {
+ regmap_read(plat->base, PHY_STAT1, &val);
+ if (~val & CALDONE_MASK) {
+ /* Calibrate IO lines */
+ regmap_update_bits(plat->base, PHY_CTRL1, PDB_MASK,
+ PDB_MASK);
+ ret = regmap_read_poll_timeout(plat->base, PHY_STAT1,
+ val, val & CALDONE_MASK,
+ 1, 20);
+ if (ret)
+ return ret;
+ }
- /* Configure DLL TRIM */
- mask = DLL_TRIM_ICP_MASK;
- val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
+ /* Configure DLL TRIM */
+ mask = DLL_TRIM_ICP_MASK;
+ val = plat->trm_icp << DLL_TRIM_ICP_SHIFT;
- /* Configure DLL driver strength */
- mask |= DR_TY_MASK;
- val |= plat->drv_strength << DR_TY_SHIFT;
- regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
+ /* Configure DLL driver strength */
+ mask |= DR_TY_MASK;
+ val |= plat->drv_strength << DR_TY_SHIFT;
+ regmap_update_bits(plat->base, PHY_CTRL1, mask, val);
+ }
/* Enable pins by setting IO mux to 0 */
regmap_update_bits(plat->base, PHY_CTRL1, IOMUX_ENABLE_MASK, 0);
@@ -246,7 +256,7 @@ static int am654_sdhci_probe(struct udevice *dev)
AM654_SDHCI_MIN_FREQ);
if (ret)
return ret;
- host->ops = &am654_sdhci_ops;
+ host->ops = (struct sdhci_ops *)dev_get_driver_data(dev);
host->mmc->priv = host;
upriv->mmc = host->mmc;
@@ -269,37 +279,44 @@ static int am654_sdhci_ofdata_to_platdata(struct udevice *dev)
host->ioaddr = (void *)dev_read_addr(dev);
plat->non_removable = dev_read_bool(dev, "non-removable");
- ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp);
- if (ret)
- return ret;
+ if (device_is_compatible(dev, "ti,am654-sdhci-5.1") ||
+ device_is_compatible(dev, "ti,j721e-sdhci-8bit"))
+ plat->flags |= DLL_PRESENT;
ret = dev_read_u32(dev, "ti,otap-del-sel", &plat->otap_del_sel);
if (ret)
return ret;
- ret = dev_read_u32(dev, "ti,driver-strength-ohm", &drv_strength);
- if (ret)
- return ret;
+ if (plat->flags & DLL_PRESENT) {
+ ret = dev_read_u32(dev, "ti,trm-icp", &plat->trm_icp);
+ if (ret)
+ return ret;
+
+ ret = dev_read_u32(dev, "ti,driver-strength-ohm",
+ &drv_strength);
+ if (ret)
+ return ret;
- switch (drv_strength) {
- case 50:
- plat->drv_strength = DRIVER_STRENGTH_50_OHM;
- break;
- case 33:
- plat->drv_strength = DRIVER_STRENGTH_33_OHM;
- break;
- case 66:
- plat->drv_strength = DRIVER_STRENGTH_66_OHM;
- break;
- case 100:
- plat->drv_strength = DRIVER_STRENGTH_100_OHM;
- break;
- case 40:
- plat->drv_strength = DRIVER_STRENGTH_40_OHM;
- break;
- default:
- dev_err(dev, "Invalid driver strength\n");
- return -EINVAL;
+ switch (drv_strength) {
+ case 50:
+ plat->drv_strength = DRIVER_STRENGTH_50_OHM;
+ break;
+ case 33:
+ plat->drv_strength = DRIVER_STRENGTH_33_OHM;
+ break;
+ case 66:
+ plat->drv_strength = DRIVER_STRENGTH_66_OHM;
+ break;
+ case 100:
+ plat->drv_strength = DRIVER_STRENGTH_100_OHM;
+ break;
+ case 40:
+ plat->drv_strength = DRIVER_STRENGTH_40_OHM;
+ break;
+ default:
+ dev_err(dev, "Invalid driver strength\n");
+ return -EINVAL;
+ }
}
ret = mmc_of_parse(dev, cfg);
@@ -317,7 +334,18 @@ static int am654_sdhci_bind(struct udevice *dev)
}
static const struct udevice_id am654_sdhci_ids[] = {
- { .compatible = "ti,am654-sdhci-5.1" },
+ {
+ .compatible = "ti,am654-sdhci-5.1",
+ .data = (ulong)&am654_sdhci_ops,
+ },
+ {
+ .compatible = "ti,j721e-sdhci-8bit",
+ .data = (ulong)&am654_sdhci_ops,
+ },
+ {
+ .compatible = "ti,j721e-sdhci-4bit",
+ .data = (ulong)&j721e_4bit_sdhci_ops,
+ },
{ }
};
--
2.17.1
More information about the U-Boot
mailing list