[U-Boot] [PATCH 2/5] mx7ulp_evk: Update LPDDR3 script

[Peng Fan]

From: Ye Li <ye.li at nxp.com>

Update LPDDR3 script with the changes below:
  -Update the precharge command to CMD=01 at the DDR initialization phase
  -remove unimplemented registers
   Write data bit delay --refer to the DDR_TRIM bits in
   IOMUXC1_DDR_SW_PAD_CTL_PAD_DDRn

Test:
  One EVK board passes overnight stress test.

Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 board/freescale/mx7ulp_evk/imximage.cfg |  9 ++-------
 board/freescale/mx7ulp_evk/plugin.S     | 13 ++-----------
 2 files changed, 4 insertions(+), 18 deletions(-)

diff --git a/board/freescale/mx7ulp_evk/imximage.cfg b/board/freescale/mx7ulp_evk/imximage.cfg
index 78df69f40e..e7d87beb5f 100644
--- a/board/freescale/mx7ulp_evk/imximage.cfg
+++ b/board/freescale/mx7ulp_evk/imximage.cfg
@@ -88,11 +88,6 @@ DATA 4   0x40AB0820 0x33333333
 DATA 4   0x40AB0824 0x33333333
 DATA 4   0x40AB0828 0x33333333
 
-DATA 4   0x40AB082C 0xf3333333
-DATA 4   0x40AB0830 0xf3333333
-DATA 4   0x40AB0834 0xf3333333
-DATA 4   0x40AB0838 0xf3333333
-
 DATA 4   0x40AB08C0 0x24922492
 DATA 4   0x40AB08B8 0x00000800
 
@@ -107,8 +102,8 @@ DATA 4   0x40AB0030 0x009F0E10
 DATA 4   0x40AB0040 0x0000003F
 DATA 4   0x40AB0000 0xC3190000
 
-DATA 4   0x40AB001C 0x00008050
-DATA 4   0x40AB001C 0x00008058
+DATA 4   0x40AB001C 0x00008010
+DATA 4   0x40AB001C 0x00008018
 DATA 4   0x40AB001C 0x003F8030
 DATA 4   0x40AB001C 0x003F8038
 DATA 4   0x40AB001C 0xFF0A8030
diff --git a/board/freescale/mx7ulp_evk/plugin.S b/board/freescale/mx7ulp_evk/plugin.S
index 802ae5f49a..73636c679f 100644
--- a/board/freescale/mx7ulp_evk/plugin.S
+++ b/board/freescale/mx7ulp_evk/plugin.S
@@ -115,15 +115,6 @@ wait2:
 	ldr r1, =0x33333333
 	str r1, [r0, #0x828]
 
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x82c]
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x830]
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x834]
-	ldr r1, =0xf3333333
-	str r1, [r0, #0x838]
-
 	ldr r1, =0x24922492
 	str r1, [r0, #0x8c0]
 	ldr r1, =0x00000800
@@ -151,9 +142,9 @@ wait2:
 	ldr r1, =0xC3190000
 	str r1, [r0, #0x0]
 
-	ldr r1, =0x00008050
+	ldr r1, =0x00008010
 	str r1, [r0, #0x1c]
-	ldr r1, =0x00008058
+	ldr r1, =0x00008018
 	str r1, [r0, #0x1c]
 	ldr r1, =0x003F8030
 	str r1, [r0, #0x1c]
-- 
2.16.4