[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Fabio Estevam]

On Thu, May 23, 2019 at 1:11 PM Jagan Teki <jagan at amarulasolutions.com> wrote:

> Don't know whether this is SPL size issue or not? can you try
> SPL_OF_PLATDATA and TINY* I can see the size reduced with 64512 bytes
> (one build issue on fdtdec_get_int undefined)

Yes, it does not build with CONFIG_SPL_OF_PLATDATA:

lib/built-in.o: In function `fdtdec_parse_phandle_with_args':
/home/fabio/u-boot/lib/fdtdec.c:788: undefined reference to `fdtdec_get_int'
drivers/built-in.o: In function `fsl_esdhc_probe':
/home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1480: undefined reference
to `fdtdec_get_int'
/home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1482: undefined reference
to `fdtdec_get_int'
/home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1485: undefined reference
to `fdtdec_get_int'
scripts/Makefile.spl:404: recipe for target 'spl/u-boot-spl' failed
make[1]: *** [spl/u-boot-spl] Error 1

Thanks for the suggestions, but at this point I prefer to go with the
removal of CONFIG_SPL_DM.

For 2019.07 it would be really nice if we could fix these two issues:

1. Allow to load a FIT image via Serial Download Protocol

2. Detect the SPL size overflow in build-time