[U-Boot] [PATCH] ata: ahci: enable bus mastering

[Christian Gmeiner]

Hi Bin,

Am Do., 23. Mai 2019 um 04:17 Uhr schrieb Bin Meng <bmeng.cn at gmail.com>:
>
> Hi Christian,
>
> On Thu, May 23, 2019 at 2:40 AM Simon Glass <sjg at chromium.org> wrote:
> >
> > Hi Christian,
> >
> > On Wed, 22 May 2019 at 02:40, Christian Gmeiner
> > <christian.gmeiner at gmail.com> wrote:
> > >
> > > When using the coreboot target CONFIG_DM_SCSI gets set to y. This has the effect
> > > that the current 'enable bus mastering' logic gets not compiled in. This change
> >
> > Where is it missing? Is it because U-Boot is not scanning the PCI bus?
>
> If this is the case, we should fix similar issue on other devices, not
> just only SATA.
>

In the ahci driver there is some bus master stuff - but not build with
the coreboot configuration.
See:
https://git.denx.de/?p=u-boot.git;a=blob;f=drivers/ata/ahci.c;h=e3135bb75fddb303cd3e826f02926df0c25e2cfe;hb=HEAD#l325

Other drivers I am using on this platform are fine and do the bus
master enable thing.
- e1000
- xhci

> >
> > > fixes ahci problems I am seeing on an Intel Apollolake device.
> > >
> > > Signed-off-by: Christian Gmeiner <christian.gmeiner at gmail.com>
> > > ---
> > >  drivers/ata/ahci.c | 6 ++++++
> > >  1 file changed, 6 insertions(+)
> > >
>

-- 
greets
--
Christian Gmeiner, MSc

https://christian-gmeiner.info