[U-Boot] [PATCH 1/3] rk3399: orangepi: Enable TPL

[Kever Yang]

Hi Jagan,

    The first two patches need re-base after the patch from Tom:

344a0e4367 configs: Resync with savedefconfig


Thanks,
- Kever
On 05/09/2019 06:57 PM, Jagan Teki wrote:
> Enable TPL for OrangePI rk3399 board.
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
>  configs/orangepi-rk3399_defconfig | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/configs/orangepi-rk3399_defconfig b/configs/orangepi-rk3399_defconfig
> index 3f02c89983..90021bb695 100644
> --- a/configs/orangepi-rk3399_defconfig
> +++ b/configs/orangepi-rk3399_defconfig
> @@ -5,7 +5,7 @@ CONFIG_SPL_LIBCOMMON_SUPPORT=y
>  CONFIG_SPL_LIBGENERIC_SUPPORT=y
>  CONFIG_SYS_MALLOC_F_LEN=0x4000
>  CONFIG_ROCKCHIP_RK3399=y
> -CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x4000
> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000
>  CONFIG_DEBUG_UART_BASE=0xFF1A0000
>  CONFIG_DEBUG_UART_CLOCK=24000000
>  CONFIG_SPL_STACK_R_ADDR=0x80000
> @@ -14,9 +14,8 @@ CONFIG_NR_DRAM_BANKS=1
>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
>  # CONFIG_DISPLAY_CPUINFO is not set
>  CONFIG_DISPLAY_BOARDINFO_LATE=y
> -CONFIG_SPL_TEXT_BASE=0xff8c2000
>  CONFIG_SPL_STACK_R=y
> -CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x4000
> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
>  CONFIG_CMD_BOOTZ=y
>  CONFIG_CMD_GPT=y
>  CONFIG_CMD_MMC=y
> @@ -24,6 +23,7 @@ CONFIG_CMD_SF=y
>  CONFIG_CMD_USB=y
>  # CONFIG_CMD_SETEXPR is not set
>  CONFIG_CMD_TIME=y
> +CONFIG_TPL=y
>  CONFIG_SPL_OF_CONTROL=y
>  CONFIG_DEFAULT_DEVICE_TREE="rk3399-orangepi"
>  CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
> @@ -56,4 +56,5 @@ CONFIG_USB_ETHER_MCS7830=y
>  CONFIG_USB_ETHER_RTL8152=y
>  CONFIG_USB_ETHER_SMSC95XX=y
>  CONFIG_USE_TINY_PRINTF=y
> +CONFIG_SPL_TINY_MEMSET=y
>  CONFIG_ERRNO_STR=y