[U-Boot] [PATCH 0/1] Add MikroTik CRS305-1G-4S+IN board support
Luka Kovacic
me at lukakovacic.xyz
Fri May 3 21:52:57 UTC 2019
I have commented out the code around MVEBU_GPIO1_BASE.
GPIO1 is a software reset button on the board, I might
use it later for resetting the board.
GPIO0 is already working. It's currently used to turn
on an LED on board initialization.
Luka Kovacic (1):
arm: mvebu: Add CRS305-1G-4S board
arch/arm/dts/Makefile | 3 +-
.../dts/armada-xp-crs305-1g-4s-u-boot.dtsi | 13 +++
arch/arm/dts/armada-xp-crs305-1g-4s.dts | 110 ++++++++++++++++++
arch/arm/mach-mvebu/Kconfig | 7 ++
board/mikrotik/crs305-1g-4s/.gitignore | 1 +
board/mikrotik/crs305-1g-4s/MAINTAINERS | 7 ++
board/mikrotik/crs305-1g-4s/Makefile | 14 +++
board/mikrotik/crs305-1g-4s/README | 23 ++++
board/mikrotik/crs305-1g-4s/binary.0 | 11 ++
board/mikrotik/crs305-1g-4s/crs305-1g-4s.c | 71 +++++++++++
board/mikrotik/crs305-1g-4s/kwbimage.cfg.in | 12 ++
configs/crs305-1g-4s_defconfig | 52 +++++++++
include/configs/crs305-1g-4s.h | 37 ++++++
13 files changed, 360 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/armada-xp-crs305-1g-4s-u-boot.dtsi
create mode 100644 arch/arm/dts/armada-xp-crs305-1g-4s.dts
create mode 100644 board/mikrotik/crs305-1g-4s/.gitignore
create mode 100644 board/mikrotik/crs305-1g-4s/MAINTAINERS
create mode 100644 board/mikrotik/crs305-1g-4s/Makefile
create mode 100644 board/mikrotik/crs305-1g-4s/README
create mode 100644 board/mikrotik/crs305-1g-4s/binary.0
create mode 100644 board/mikrotik/crs305-1g-4s/crs305-1g-4s.c
create mode 100644 board/mikrotik/crs305-1g-4s/kwbimage.cfg.in
create mode 100644 configs/crs305-1g-4s_defconfig
create mode 100644 include/configs/crs305-1g-4s.h
--
2.20.1
More information about the U-Boot
mailing list