[U-Boot] [PATCH v6 0/2] colibri imx8qxp 2gb wb it v1.0b module support

[Marcel Ziswiler]

This series fixes building for i.MX8 without SPL and adds support for
more lpuart instances, cleans-up and extends the Toradex SKU handling
and last but not least introduces support for the Toradex Colibri
iMX8QXP 2GB WB IT V1.0B module.

This series is available together with the last few clean-up patches
on our git server [1] as well.

[1] http://git.toradex.com/cgit/u-boot-toradex.git/log/?h=for-next

Changes in v6:
- Use firmware-imx-8.0 matching NXP's sumo-4.14.78-1.0.0_ga BSP as
  suggested by Max during review of Apalis iMX8QM.
- Drop anyway commented out board_gpio_init() stuff.
- Drop Qualcomm (formwerly Atheros) AR8031 specific board_phy_config()
  stuff not applicable to the Micrel PHY we are using as suggested by
  Max during review of Apalis iMX8QM.

Changes in v5:
- Keep alphabetical order of device trees in Makefile.
- Order targets in Kconfig alphabetically.
- Fix indentation in SPDX.
- Remove stale includes from board file.
- Take into account ahab-container being platform specific.
- Use vidargs instead of multiple discrete video= in configuration.
- Fix console baudrate specification.
- Remove redundant CONFIG_SYS_MMC_ENV_DEV define and add some clarifying
  comment.
- Fix product name being Colibri iMX8X in a comment.
- Remove obsolete CONFIG_NR_DRAM_BANKS.

Changes in v4:
- Fixed SPDX as well as using SZ_ macros where applicable as suggested
  by Igor.
- Fixed superfluous trailing line continuation introduced by commit
  0d331c035a09 ("imx: support i.MX8QM MEK board") in the Makefile plus
  sorted stuff alphabetically again.
- Applied changes similar to commit 3b9ac5415084 ("imx: 8qxp_mek: fix
  fdt_file and console"). However, note that using ${baudrate} in
  console= like that won't actually work!
- Applied changes similar to commit e5b8f7e665aa ("imx8qxp: mek: enable
  dm-spl for pm").

Changes in v3:
- Added Igor's reviewed-by tag.

Changes in v2:
- Changed imx-atf git clone command to include initial branch
  information as suggested by Igor.
- Sorted board file includes alphabetically as suggested by Igor.
- Got rid of SPL configuration in legacy header file as suggested by
  Igor and the whole use of SPL on i.MX 8X anyway neither works well
  nor makes any much sense at all.

Marcel Ziswiler (2):
  imx: fix building for i.mx8 without spl
  board: toradex: add colibri imx8qxp 2gb wb it v1.0b module support

 arch/arm/dts/Makefile                         |   3 +-
 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi  | 117 +++++++
 arch/arm/dts/fsl-imx8qxp-colibri.dts          | 328 ++++++++++++++++++
 arch/arm/mach-imx/Makefile                    |   2 +
 arch/arm/mach-imx/imx8/Kconfig                |  12 +-
 board/toradex/colibri-imx8qxp/Kconfig         |  30 ++
 board/toradex/colibri-imx8qxp/MAINTAINERS     |   9 +
 board/toradex/colibri-imx8qxp/Makefile        |   6 +
 board/toradex/colibri-imx8qxp/README          |  66 ++++
 .../toradex/colibri-imx8qxp/colibri-imx8qxp.c | 160 +++++++++
 board/toradex/colibri-imx8qxp/imximage.cfg    |  24 ++
 configs/colibri-imx8qxp_defconfig             |  53 +++
 include/configs/colibri-imx8qxp.h             | 210 +++++++++++
 13 files changed, 1016 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/dts/fsl-imx8qxp-colibri-u-boot.dtsi
 create mode 100644 arch/arm/dts/fsl-imx8qxp-colibri.dts
 create mode 100644 board/toradex/colibri-imx8qxp/Kconfig
 create mode 100644 board/toradex/colibri-imx8qxp/MAINTAINERS
 create mode 100644 board/toradex/colibri-imx8qxp/Makefile
 create mode 100644 board/toradex/colibri-imx8qxp/README
 create mode 100644 board/toradex/colibri-imx8qxp/colibri-imx8qxp.c
 create mode 100644 board/toradex/colibri-imx8qxp/imximage.cfg
 create mode 100644 configs/colibri-imx8qxp_defconfig
 create mode 100644 include/configs/colibri-imx8qxp.h

-- 
2.20.1