[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Fabio Estevam]

Hi Jagan,

On Thu, May 16, 2019 at 2:37 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>
> On Thu, May 16, 2019 at 11:02 PM Fabio Estevam <festevam at gmail.com> wrote:
> >
> > Hi,
> >
> > I get the following error when trying to boot mx6q sabresd with 2019.07-rc2:
> >
> > U-Boot SPL 2019.07-rc2 (May 16 2019 - 14:28:55 -0300)
> > Trying to boot from MMC1
> > spl: could not find mmc device 0. error: -19
>
> No device.
>
> Is it DM-SPL-enabled? check with u-boot,dm-spl on associated nodes?

Yes, configs/mx6sabresd_defconfig has CONFIG_SPL_DM=y.

arch/arm/dts/imx6qp-sabresd-u-boot.dtsi passes u-boot,dm-spl to usdhc3.

>
> usdhc3 is  for sabresd, seems like gpio2 missing to add u-boot,dm-spl

I tried:

--- a/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
+++ b/arch/arm/dts/imx6qdl-sabresd-u-boot.dtsi
@@ -12,3 +12,7 @@
 &pinctrl_usdhc3 {
        u-boot,dm-spl;
 };
+
+&gpio2 {
+       u-boot,dm-spl;
+};

but still not booting.