[U-Boot] [PATCH 0/6] sunxi: H6: Enable USB (2.0) support

[Andre Przywara]

Hi,

this series enables USB support on the H6 boards. This is mostly just
adding some missing pieces here and there, the actual controller and PHY
are very similar to the previous ones, if not identical.
This is for the 2.0 ports only at the moment, USB 3.0 will be done
later (started porting Icenowy's Linux driver).
The Pine H64 shares a similar problem as the Pine64+ boards regarding
the upper USB port. To enable this port, we need the first patch
from the series [1] fixing this issue on the A64 boards.

Patch 1 is a drive-by patch to bring SUNXI_GPIO to Kconfig, as this was
lingering in one of my branches for a while.
Patch 2 enables GPIO support for the H6, as this is needed for the Pine
H64 to enable the VBUS regulator.
Patch 3 adds the clock and reset gates mappings for the USB controller and
the PHY, the values are taken from the manual and verified against
Linux.
Patch 4 adds some code to the PHY driver to skip over not implemented
PHYs, as the H6 uses a PHY0/PHY3 combination in the DT.
Patch 5 then eventually enables USB in the existing defconfigs.
Patch 6 adds the .dts fixes required to get the upper USB port to work
on the Pine H64.

Clément, can you please verify that this works for the Beelink box?
I guess the USB 2.0 port is probably the OTG one, so this setup would
look somewhat similar to the PineH64, which would allow you to copy
the USB DT nodes from there.

Cheers,
Andre.

[1] https://lists.denx.de/pipermail/u-boot/2019-May/369520.html

Andre Przywara (6):
  sunxi: move SUNXI_GPIO to Kconfig
  sunxi: gpio: Enable support for H6 pin controller
  sunxi: clocks: Add H6 USB clock gates and resets
  sunxi: phy: Add USB PHY support for Allwinner H6
  sunxi: H6: Enable USB for existing boards
  sunxi: Pine64: DTS: enable USB PHY 0 for HCI0

 arch/arm/Kconfig                      |  1 +
 arch/arm/dts/sun50i-h6-pine-h64.dts   |  5 ++++-
 arch/arm/mach-sunxi/Kconfig           |  1 +
 configs/beelink_gs1_defconfig         |  2 ++
 configs/orangepi_lite2_defconfig      |  2 ++
 configs/orangepi_one_plus_defconfig   |  2 ++
 configs/pine_h64_defconfig            |  3 +++
 drivers/clk/sunxi/clk_h6.c            | 29 +++++++++++++++++++++++++++++
 drivers/gpio/Kconfig                  |  6 ++++++
 drivers/gpio/sunxi_gpio.c             |  2 ++
 drivers/phy/allwinner/phy-sun4i-usb.c | 20 ++++++++++++++++++++
 include/configs/sunxi-common.h        |  3 ---
 scripts/config_whitelist.txt          |  1 -
 13 files changed, 72 insertions(+), 5 deletions(-)

-- 
2.14.5