[U-Boot] [PATCH 0/2] sunxi: A64: enable first USB port on Pine64 boards

[Andre Przywara]

Since the beginning the upper USB port on Pine64 boards (Pine64+, SoPine
baseboard, Pine64-LTS, Pinebook) was not working under U-Boot.
This is due to the PHY for those pins being shared with the OTG
controller, which we didn't even enable for those boards. Also the PHY
code was always connecting the port pins to the OTG controller.

These two patches fix this, so the upper USB port on said boards can
be used within U-Boot. This allows to use an USB keyboard alongside
an USB flash drive, for instance to install operating systems using
UEFI.

Cheers,
Andre.

Andre Przywara (2):
  sunxi: USB PHY: Support shared PHY 0
  sunxi: Pine64: DTS: enable USB PHY 0 for HCI0

 arch/arm/dts/sun50i-a64-pine64.dts           | 5 ++++-
 arch/arm/dts/sun50i-a64-sopine-baseboard.dts | 5 ++++-
 drivers/phy/allwinner/phy-sun4i-usb.c        | 8 +++++++-
 3 files changed, 15 insertions(+), 3 deletions(-)

-- 
2.14.5