[U-Boot] [PATCH] boards: amlogic-g200: remove phy reset

[Neil Armstrong]

On 28/05/2019 13:15, Neil Armstrong wrote:
> The PHY reset is now handled by the MAC driver, remove this leftover.
> 
> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> ---
>  board/amlogic/q200/q200.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
> index 1932c14aa2..2ea97c362e 100644
> --- a/board/amlogic/q200/q200.c
> +++ b/board/amlogic/q200/q200.c
> @@ -26,12 +26,6 @@ int misc_init_r(void)
>  
>  	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
>  
> -	/* Reset PHY on GPIOZ_14 */
> -	clrbits_le32(GX_GPIO_EN(3), BIT(14));
> -	clrbits_le32(GX_GPIO_OUT(3), BIT(14));
> -	mdelay(10);
> -	setbits_le32(GX_GPIO_OUT(3), BIT(14));
> -
>  	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
>  		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
>  					  mac_addr, EFUSE_MAC_SIZE);
> 

Applied to u-boot-amlogic