[U-Boot] [PATCH] boards: amlogic-g200: remove phy reset

[Neil Armstrong]

The PHY reset is now handled by the MAC driver, remove this leftover.

Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
---
 board/amlogic/q200/q200.c | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/board/amlogic/q200/q200.c b/board/amlogic/q200/q200.c
index 1932c14aa2..2ea97c362e 100644
--- a/board/amlogic/q200/q200.c
+++ b/board/amlogic/q200/q200.c
@@ -26,12 +26,6 @@ int misc_init_r(void)
 
 	meson_eth_init(PHY_INTERFACE_MODE_RGMII, 0);
 
-	/* Reset PHY on GPIOZ_14 */
-	clrbits_le32(GX_GPIO_EN(3), BIT(14));
-	clrbits_le32(GX_GPIO_OUT(3), BIT(14));
-	mdelay(10);
-	setbits_le32(GX_GPIO_OUT(3), BIT(14));
-
 	if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
 		len = meson_sm_read_efuse(EFUSE_MAC_OFFSET,
 					  mac_addr, EFUSE_MAC_SIZE);
-- 
2.21.0