[U-Boot] [PATCH 00/18] Add EEPROM-based board detect support for TI

[Lokesh Vutla]

On 09/05/19 3:07 AM, Andreas Dannenberg wrote:
> This series adds the pieces needed to fully configure the TI AM654x EVM
> and its associated (optional) daughtercards using a GPIO-based card
> presence detection scheme. It then reads out and parses any I2C EEPROM
> data present on any such boards for example board name, serial #,
> Ethernet MAC addresses, etc. and incorporates this data into the current
> U-Boot environment. One important aspect is the application of
> daughercard-specific DTB overlays right before the Kernel boot happens.
> 
> This series also adds basic I2C support for TI K3 family devices which
> is a prerequisite for the EEPROM access.

For the entire series:
Reviewed-by: Lokesh Vutla <lokeshvutla at ti.com>

Thanks and regards,
Lokesh

> 
> --
> Andreas Dannenberg
> Texas Instruments Inc
> 
> 
> Andreas Dannenberg (16):
>   arm: dts: k3-am65: Move pinctrl nodes out of U-Boot specific dtsi
>   arm: dts: k3-am65: Add I2C nodes
>   arm: dts: k3-am654-base-board: Enable wkup_i2c0 across all boot stages
>   configs: am65x_evm_defconfig: Enable I2C support
>   configs: am65x_hs_evm_defconfig: Enable I2C support
>   arm64: dts: k3-am654-base-board: Add I2C GPIO expander @ 0x38
>   configs: am65x_evm_a53: Enable PCA953X-type GPIO driver
>   configs: am65x_hs_evm_a53: Enable PCA953X-type GPIO driver
>   configs: am65x_evm_a53: Increase malloc pool before relocation
>   configs: am65x_hs_evm_a53: Increase malloc pool before relocation
>   arm: K3: am654: Map common EEPROM data into SRAM scratch space
>   ti: common: am6: Add support for board description EEPROM
>   ti: common: am6: Add support for setting MAC addresses
>   board: ti: am654: Use EEPROM-based board detection
>   configs: am65x_evm: Add support for applying overlays
>   configs: am65x_hs_evm: Add support for applying overlays
> 
> Vignesh R (2):
>   i2c: omap24xx_i2c: Adapt driver to support K3 devices
>   arm: omap_i2c: Remove unwanted header file inclusion
> 
>  arch/arm/dts/k3-am65-main.dtsi               |  60 +++++
>  arch/arm/dts/k3-am65-mcu.dtsi                |  11 +
>  arch/arm/dts/k3-am65-wakeup.dtsi             |  19 ++
>  arch/arm/dts/k3-am65.dtsi                    |   7 +
>  arch/arm/dts/k3-am654-base-board-u-boot.dtsi |  35 +--
>  arch/arm/dts/k3-am654-base-board.dts         |  22 ++
>  arch/arm/dts/k3-am654-r5-base-board.dts      |  13 +
>  arch/arm/include/asm/omap_i2c.h              |   2 -
>  arch/arm/mach-k3/am6_init.c                  |   4 +
>  arch/arm/mach-k3/include/mach/am6_hardware.h |   3 +
>  arch/arm/mach-k3/include/mach/sys_proto.h    |   2 +
>  board/ti/am65x/Kconfig                       |   7 +
>  board/ti/am65x/evm.c                         | 241 ++++++++++++++++++
>  board/ti/common/board_detect.c               | 246 +++++++++++++++++++
>  board/ti/common/board_detect.h               | 206 ++++++++++++++++
>  configs/am65x_evm_a53_defconfig              |  11 +-
>  configs/am65x_evm_r5_defconfig               |   4 +
>  configs/am65x_hs_evm_a53_defconfig           |  11 +-
>  configs/am65x_hs_evm_r5_defconfig            |   4 +
>  drivers/i2c/Kconfig                          |   2 +-
>  include/configs/am65x_evm.h                  |  18 +-
>  21 files changed, 892 insertions(+), 36 deletions(-)
>