[U-Boot] [PATCH 5/8] rockchip: rk3399: Enable SPL_BOARD_INIT

[Jagan Teki]

Enable SPL_BOARD_INIT globally to rk3399, this would
help to print the SPL banner during bootup.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
 arch/arm/mach-rockchip/Kconfig | 1 +
 configs/puma-rk3399_defconfig  | 1 -
 2 files changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index c05e3c3f48..ce039022df 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -158,6 +158,7 @@ config ROCKCHIP_RK3399
 	select SPL
 	select SPL_ATF
 	select SPL_ATF_NO_PLATFORM_PARAM if SPL_ATF
+	select SPL_BOARD_INIT if SPL
 	select SPL_LOAD_FIT
 	select SPL_CLK if SPL
 	select SPL_PINCTRL if SPL
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index ebc78fb216..5cb2273a15 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -21,7 +21,6 @@ CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 CONFIG_SPL_TEXT_BASE=0xff8c2000
-CONFIG_SPL_BOARD_INIT=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
-- 
2.18.0.321.gffc6fa0e3