[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Adam Ford]

On Thu, May 23, 2019 at 1:35 PM Fabio Estevam <festevam at gmail.com> wrote:
>
> Hi Adam,
>
> On Thu, May 23, 2019 at 3:28 PM Adam Ford <aford173 at gmail.com> wrote:
>
> > I have been following this thread, because I have been working through
> > attempting to migrate the imx6q_logic board to SPL_OF_CONTROL which
> > requires SPL_DM.
> >
> > To working around the issue you're describing, I played with disabling
> >  SPL_DM_USB.  With that removed, I can still use nearly all the
> > benefits of SPL_DM without losing access to imx_usb_loader.
> > See log:
>
> I took a look at the configs/imx6q_logic_defconfig file and it does
> not use FIT support like we do in mx6sabresd.
>
> If I remove FIT support then imx_usb_loader works fine here too.
>
> imx6q_logic_defconfig only supports the mx6q variant, whereas sabresd
> needs to support mx6q/dl/qp variants , so we use FIT image that
> contains therese 3 dtbs.
>
> So the problem with SDP at the moment is when trying to load a FIT image.

Sorry.  I misunderstood the problem.

>
> Thanks