[U-Boot] [PATCH 3/7] warp7: include: configs: Differentiate bootscript address from loadaddr

[Bryan O'Donoghue]

Reusing the loadaddr to load the boot script breaks some of the logic we
want to have around the bootscript/FIT load addresses. Making a dedicated
bootscript address allows us to differentiate the bootscript load address
from the Linux Kernel or OPTEE load address, thus ensuring that no matter
what the load sequence the bootscript and Kernel/OPTEE binary load
addresses do not conflict.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue at linaro.org>
---
 include/configs/warp7.h | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index 95955fd626..0c63050833 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -50,6 +50,7 @@
 	"script=boot.scr\0" \
 	"bootscr_fitimage_name=bootscr\0" \
 	"script_signed=boot.scr.imx-signed\0" \
+	"bootscriptaddr=0x83200000\0" \
 	"image=zImage\0" \
 	"console=ttymxc0\0" \
 	"ethact=usb_ether\0" \
@@ -70,16 +71,16 @@
 	"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
 	"do_bootscript_hab=" \
 		"if test ${hab_enabled} -eq 1; then " \
-			"setexpr hab_ivt_addr ${loadaddr} - ${ivt_offset}; " \
+			"setexpr hab_ivt_addr ${bootscriptaddr} - ${ivt_offset}; " \
 			"setenv script ${script_signed}; " \
 			"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
 			"run warp7_auth_or_fail; " \
 			"run bootscript; "\
 		"fi;\0" \
 	"loadbootscript=" \
-		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
+		"load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
-		"source\0" \
+		BOOT_SCR_STRING \
 	"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
-- 
2.21.0