[U-Boot] [PATCH 6/6] sunxi: Pine64: DTS: enable USB PHY 0 for HCI0

[Andre Przywara]

The first USB controller on the H6 SoC shares a PHY with the OTG
controller. Reportedly to avoid problems with the VBUS regulator under
Linux, we don't link OHCI0/EHCI0 to the USB PHY in the H6 .dtsi file.

However on boards which can't use peripheral mode (because they have an
always-on VBUS supply on an USB-A socket) we don't need this trick, and
can properly connect host controller 0 to the PHY 0.

Amend the Pine H64 .dts to reflect this. This enables the upper USB port
in U-Boot on this board.

Signed-off-by: Andre Przywara <andre.przywara at arm.com>
---
 arch/arm/dts/sun50i-h6-pine-h64.dts | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
index 4802902e12..aad7646b18 100644
--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
+++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
@@ -96,6 +96,8 @@
 };
 
 &ehci0 {
+	phys = <&usb2phy 0>;
+	phy-names = "usb";
 	status = "okay";
 };
 
@@ -120,6 +122,8 @@
 };
 
 &ohci0 {
+	phys = <&usb2phy 0>;
+	phy-names = "usb";
 	status = "okay";
 };
 
@@ -255,7 +259,6 @@
 
 &usb2otg {
 	dr_mode = "host";
-	status = "okay";
 };
 
 &usb2phy {
-- 
2.14.5