[U-Boot] [PATCH v2] armv8: ls1028ardb: Add sd and emmc related environments

[Yuantian Tang]

Add SD, EMMC and xspi environments to faciliate the boot.

Signed-off-by: Yuantian Tang <andy.tang at nxp.com>
---
v2:
	- rebase to latest code
 include/configs/ls1028a_common.h | 24 +++++++++++++++++++++---
 1 file changed, 21 insertions(+), 3 deletions(-)

diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h
index 0db86396e9..9531548184 100644
--- a/include/configs/ls1028a_common.h
+++ b/include/configs/ls1028a_common.h
@@ -127,25 +127,43 @@
 			"${scripthdraddr} ${prefix}${boot_script_hdr} " \
 			"&& esbc_validate ${scripthdraddr};"    \
 		"source ${scriptaddr}\0"	  \
-	"sd_bootcmd=echo Trying load from SD ..;"	\
+		"xspi_bootcmd=echo Trying load from FlexSPI flash ...;" \
+		"sf probe 0:0 && sf read $load_addr " \
+		"$kernel_start $kernel_size ; env exists secureboot &&" \
+		"sf read $kernelheader_addr_r $kernelheader_start " \
+		"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; "\
+		" bootm $load_addr#$board\0" \
+	"sd_bootcmd=echo Trying load from SD ...;" \
 		"mmcinfo; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
 		"bootm $load_addr#$board\0"		\
+		"xspi_hdploadcmd=echo Trying load HDP firmware from FlexSPI...;" \
+		"sf probe 0:0 && sf read $load_addr 0x940000 0x30000 " \
+		"&& hdp load $load_addr 0x2000\0"			\
+	"sd_hdploadcmd=echo Trying load HDP firmware from SD..;"        \
+		"mmcinfo;mmc read $load_addr 0x4a00 0x200 "             \
+		"&& hdp load $load_addr 0x2000\0"	\
 	"emmc_bootcmd=echo Trying load from EMMC ..;"	\
 		"mmcinfo; mmc dev 1; mmc read $load_addr "		\
 		"$kernel_addr_sd $kernel_size_sd && "	\
 		"env exists secureboot && mmc read $kernelheader_addr_r " \
 		"$kernelhdr_addr_sd $kernelhdr_size_sd "		\
 		" && esbc_validate ${kernelheader_addr_r};"	\
-		"bootm $load_addr#$board\0"
+		"bootm $load_addr#$board\0"			\
+	"emmc_hdploadcmd=echo Trying load HDP firmware from EMMC..;"      \
+		"mmc dev 1;mmcinfo;mmc read $load_addr 0x4a00 0x200 "	\
+		"&& hdp load $load_addr 0x2000\0"
 
 #undef CONFIG_BOOTCOMMAND
 
+#define XSPI_NOR_BOOTCOMMAND	\
+	"run qspi_hdploadcmd; run distro_bootcmd; run qspi_bootcmd; " \
+	"env exists secureboot && esbc_halt;;"
 #define SD_BOOTCOMMAND	\
-	"run distro_bootcmd;run sd_bootcmd; " \
+	"run sd_hdploadcmd; run distro_bootcmd;run sd_bootcmd; " \
 	"env exists secureboot && esbc_halt;"
 
 /* Monitor Command Prompt */
-- 
2.17.1