[U-Boot] [PATCH v3] board/BuR/zynq/brsmarc2: initial commit
Michal Simek
monstr at monstr.eu
Mon May 27 06:35:46 UTC 2019
On 10. 05. 19 7:52, Hannes Schmelzer wrote:
> This commit adds the first of a few more Xilinx ZYNQ based SoM boards.
>
> The SoM is based on Xilinx Zynq 7000 SoC.
> Mainly vxWorks 6.9.4.x is running on the board,
> doing some PLC stuff on various carrier boards.
>
> Signed-off-by: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
>
> ---
>
> Changes in v3:
> - drop silicon version 1/2 from ps7_init_gpl.c (they are obsolete)
> - board.c: drop obsolete board_eth_init(...)
> - board.c: strip down dram_init(..)
> - board.c: drop unused #include
> - board.c: cleanup comments
> - move CONFIG_ZYNQ_SERIAL from boardheader to Kconfig
> - move CONFIG_FPGA_ZYNQPL from boardheader to Kconfig
> - fix comments in boardheader
> - drop *_SYS_LDSCRIPT from boardheader (defined in Kconfig)
> - drop CONFIG_SYS_MALLOC_LEN (defined in Kconfig)
> - dop CONFIG_ENV_SPI_MAX_HZ from boardheader (defined in Kconfig)
> - dts: split vxWorks specific parts away from dts into separate file
> - dts: add compatible string to factory-settings node
> - dts: drop invalid (zero)= mac-addresses on gem0/gem1
> - dts: fixup style on ethernet_phy1 description
> - dts: add comments to phy's
> - drop helper-scripts for taking vivado handoff files into tree
>
> Changes in v2:
> - fix SDPX tag in Make-files/rules
>
> arch/arm/dts/Makefile | 2 +
> arch/arm/dts/zynq-brsmarc2-common.dtsi | 168 +++++++++++++++++
> arch/arm/dts/zynq-brsmarc2-vxworks.dtsi | 123 +++++++++++++
> arch/arm/dts/zynq-brsmarc2.dts | 15 ++
> arch/arm/dts/zynq-brsmarc2_r512.dts | 15 ++
> board/BuR/zynq/.gitignore | 1 +
> board/BuR/zynq/MAINTAINERS | 6 +
> board/BuR/zynq/Makefile | 16 ++
> board/BuR/zynq/brsmarc2/board.c | 63 +++++++
> board/BuR/zynq/brsmarc2/ps7_init_gpl.c | 276 ++++++++++++++++++++++++++++
> board/BuR/zynq/brsmarc2_r512/board.c | 2 +
> board/BuR/zynq/brsmarc2_r512/ps7_init_gpl.c | 276 ++++++++++++++++++++++++++++
If these locations are there just because of that ps7_init_gpl wiring
because of DT dependency then you should look at XILINX_PS_INIT_FILE option.
> board/BuR/zynq/config.mk | 49 +++++
> configs/brsmarc2_defconfig | 74 ++++++++
> configs/brsmarc2_r512_defconfig | 74 ++++++++
> include/configs/brsmarc2.h | 157 ++++++++++++++++
> 16 files changed, 1317 insertions(+)
> create mode 100644 arch/arm/dts/zynq-brsmarc2-common.dtsi
> create mode 100644 arch/arm/dts/zynq-brsmarc2-vxworks.dtsi
> create mode 100644 arch/arm/dts/zynq-brsmarc2.dts
> create mode 100644 arch/arm/dts/zynq-brsmarc2_r512.dts
> create mode 100644 board/BuR/zynq/.gitignore
> create mode 100644 board/BuR/zynq/MAINTAINERS
> create mode 100644 board/BuR/zynq/Makefile
> create mode 100644 board/BuR/zynq/brsmarc2/board.c
> create mode 100644 board/BuR/zynq/brsmarc2/ps7_init_gpl.c
> create mode 100644 board/BuR/zynq/brsmarc2_r512/board.c
> create mode 100644 board/BuR/zynq/brsmarc2_r512/ps7_init_gpl.c
> create mode 100644 board/BuR/zynq/config.mk
> create mode 100644 configs/brsmarc2_defconfig
> create mode 100644 configs/brsmarc2_r512_defconfig
> create mode 100644 include/configs/brsmarc2.h
>
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index dfa5b02..2b00129 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -208,6 +208,8 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
> zynq-zc770-xm011-x16.dtb \
> zynq-zc770-xm012.dtb \
> zynq-zc770-xm013.dtb \
> + zynq-brsmarc2.dtb \
> + zynq-brsmarc2_r512.dtb \
> zynq-zed.dtb \
> zynq-zturn.dtb \
> zynq-zybo.dtb \
> diff --git a/arch/arm/dts/zynq-brsmarc2-common.dtsi b/arch/arm/dts/zynq-brsmarc2-common.dtsi
> new file mode 100644
> index 0000000..ac6c85a
> --- /dev/null
> +++ b/arch/arm/dts/zynq-brsmarc2-common.dtsi
> @@ -0,0 +1,168 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * common DTS part for B&R BRSMARC2 boards
> + *
> + * Copyright (C) 2019 B&R Industrial Automation GmbH
> + */
> +
> +/dts-v1/;
> +#include "zynq-7000.dtsi"
> +#include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> + model = "BRSMARC2 Zynq SoM";
> + compatible = "xlnx,zynq-7000";
> +
> + aliases {
> + ethernet0 = &gem0;
> + ethernet1 = &gem1;
> + i2c0 = &i2c0;
> + serial0 = &uart0;
> + spi0 = &qspi;
> + mmc0 = &sdhci0;
> + can0 = &can0;
> + can1 = &can1;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x20000000>;
> + };
nit: you have it in dts file that's why this is rewritten all the time.
> +
> + chosen {
> + bootargs = "console=ttyPS0,115200 earlyprintk";
> + stdout-path = "serial0:115200n8";
> + };
> +
> + usb_phy0: phy0 {
> + compatible = "usb-nop-xceiv";
> + #phy-cells = <0>;
> + };
> +
> + board_thermal: board-thermal {
> + polling-delay-passive = <1000>; /* milliseconds */
> + polling-delay = <2500>; /* milliseconds */
> +
> + thermal-sensors = <&temp_core 0>;
> +
> + trips {
> + crit_trip: crit-trip {
> + temperature = <100000>; /* millicelsius */
> + hysteresis = <5000>; /* millicelsius */
> + type = "critical";
> + };
> + };
> + cooling-maps {
> + map0 {
> + trip = <&crit_trip>;
> + cooling-device = <&resetc>;
> + };
> + };
> + };
> +};
> +
> +&amba {
> + ocm: sram at fffc0000 {
> + compatible = "mmio-sram";
> + reg = <0xfffc0000 0x10000>;
> + };
> +};
> +
> +&clkc {
> + ps-clk-frequency = <33333333>;
> +};
> +
> +&gem0 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <ðernet_phy0>;
> +
> + /* DP83822 phy */
> + ethernet_phy0: ethernet-phy at 1 {
> + ti,ledcr = <0x0480>;
> + ti,rgmii-rxclk-shift;
Are these two your stuff? I can't see it in any binding doc.
> + reg = <1>;
> + };
> +};
> +
> +&gem1 {
> + status = "okay";
> + phy-mode = "rgmii-id";
> + phy-handle = <ðernet_phy1>;
> +
> + /* DP83822 phy */
> + ethernet_phy1: ethernet-phy at 3 {
> + ti,ledcr = <0x0480>;
ditto
> + reg = <3>;
> + };
> +};
> +
> +&i2c0 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + boardtemp: pct2075_0 at 49 {
And based on dt spec you should use this based on names recommendation.
boardtemp: temperature-sensor at 49 {
> + #thermal-sensor-cells = <0>;
> + compatible = "nxp,pct2075";
> + reg = <0x49>;
> + };
> +
> + temp_core: tmp431_1 at 4C { /* temp. zynq die */
you use addresses above as lower case that's why 4c here.
temp_core: temperature-sensor at 4c {
> + #thermal-sensor-cells = <1>;
> + compatible = "ti,tmp431";
> + reg = <0x4C>;
4c here.
> + };
> +
> + extrtc: rx8571 at 51 { /* realtime clock */
also
extrtc: rtc at 51 {
> + compatible = "epson,rx8571";
> + reg = <0x51>;
> + };
> +
> + resetc: rststm at 60 { /* reset controller */
and
resetc: reset-controller at 60 {
> + compatible = "bur,rststm";
> + reg = <0x60>;
> + hit-gpios = <&gpio0 84 GPIO_ACTIVE_HIGH>;
> + cooling-min-state = <0>;
> + cooling-max-state = <1>; /* reset gets fired */
> + #cooling-cells = <2>; /* min followed by max */
> + };
This is not approved binding in Linux.
> +};
> +
> +&qspi {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> + spi-max-frequency = <100000000>;
> + spi_flash: spiflash at 0 {
> + u-boot,dm-pre-reloc;
> + compatible = "spidev", "spi-flash";
> + spi-max-frequency = <100000000>;
> + reg = <0>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> + clock-frequency = <100000>;
> +};
> +
> +&sdhci0 {
> + status = "okay";
> + max-frequency = <25000000>;
> +};
> +
> +&uart0 {
> + u-boot,dm-pre-reloc;
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "host";
> + usb-phy = <&usb_phy0>;
> +};
> +
> +&gpio0 {
> + u-boot,dm-pre-reloc;
> +};
> diff --git a/arch/arm/dts/zynq-brsmarc2-vxworks.dtsi b/arch/arm/dts/zynq-brsmarc2-vxworks.dtsi
> new file mode 100644
> index 0000000..a1251c3
> --- /dev/null
> +++ b/arch/arm/dts/zynq-brsmarc2-vxworks.dtsi
> @@ -0,0 +1,123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * primary OS (vxWorks 6.9.4.x) specific parts for B&R BRSMARC2 boards
> + *
> + * Copyright (C) 2019 B&R Industrial Automation GmbH
> + */
> +
> +#include "zynq-brsmarc2-common.dtsi"
> +
> +/ {
> + fset: factory-settings {
> + compatible = "bur,fsetv1";
> + bl-version = " ";
> + order-no = " ";
> + cpu-order-no = " ";
> + hw-revision = " ";
> + serial-no = <0>;
> + device-id = <0x0>;
> + parent-id = <0x0>;
> + hw-variant = <0x0>;
> + hw-platform = <0x0>;
> + fram-offset = <0x0>;
> + fram-size = <0x0>;
> + cache-disable = <0x0>;
> + cpu-clock = <0x0>;
> + };
> +
> + aliases {
> + fset = &fset;
> + };
> +
> + board {
> + status = "okay";
> + compatible = "bur,brsmarc2-som";
> + usb0mux-gpios = <&gpio0 68 GPIO_ACTIVE_HIGH>;
> + usb1mux-gpios = <&gpio0 69 GPIO_ACTIVE_HIGH>;
> + powerdown-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
> + reset-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
> + };
> +
> + fpga: fpga at 40000000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + status = "disabled";
I think that all these PL nodes should go away. We have been discussing
this long time ago that we won't push any PL description to mainline
because it can change.
I would recommend you to switch this to DT overlay which your boot
script will apply for you.
Also there is no point to add IPs with status disabled to board file.
> + compatible = "bur,zynqPL", "simple-bus";
> + reg = <0x40200000 0x1 /* version registers */
> + 0x40200004 0x1>; /* misc registers */
> + bur,upddest = &spi_flash;
> + bur,updaddr = <0x100000>;
> + bur,updsize = <0x200000>;
> +
> + plk: plk at 80000000 {
> + status = "disabled";
> + compatible = "bur,DdVxIoEplSMP";
> + bur,hwtree = "IF9";
> + reg = <0x80000000 0x8000>;
> + interrupt-parent = <&intc>;
> + interrupts = <0 68 4>,
> + <0 84 4>;
> + local-mac-address = [ 00 60 65 aa ab ac ];
> + };
> +
> + x2x: x2x at 40100000 {
> + status = "disabled";
> + compatible = "bur,xlk";
> + bur,hwtree = "IF10";
> + reg = <0x40100000 0x8000
> + 0x40108000 0x8000>;
> + interrupt-parent = <&intc>;
> + interrupts = <0 65 4>;
> + };
> +
> + uart2: serial at 40200800 {
> + status = "disabled";
> + compatible = "ns16550a", "bur,DdVxSf16x5xIO";
> + bur,hwtree = "IF8";
> + reg = <0x40200800 0x40>;
> + interrupt-parent = <&intc>;
> + interrupts = <0 66 4>;
> + term-gpios = <&gpio0 71 GPIO_ACTIVE_HIGH>;
> + };
> +
> + uart3: serial at 40200840 {
> + status = "disabled";
> + compatible = "ns16550a", "bur,DdVxSf16x5xIO";
> + bur,hwtree = "IF9";
> + reg = <0x40200840 0x40>;
> + interrupt-parent = <&intc>;
> + interrupts = <0 67 4>;
> + term-gpios = <&gpio0 71 GPIO_ACTIVE_HIGH>;
> + };
> +
> + uart4: serial at 40200900 {
> + status = "disabled";
> + compatible = "ns16550a", "bur,DdVxSf16x5xIO";
> + bur,hwtree = "IF20";
> + reg = <0x40200900 0x40>;
> + interrupt-parent = <&intc>;
> + interrupts = <0 88 4>;
> + };
> +
> + uart5: serial at 40200A00 {
> + status = "disabled";
> + compatible = "ns16550a", "bur,DdVxSf16x5xIO";
> + bur,hwtree = "IF21";
> + reg = <0x40200A00 0x40>;
> + interrupt-parent = <&intc>;
> + interrupts = <0 90 4>;
> + };
> + };
> +};
> +
> +&can0 {
> + status = "disabled";
> + bur,hwtree = "IF6";
> + term-gpios = <&gpio0 70 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&can1 {
> + status = "disabled";
> + bur,hwtree = "IF7";
> + term-gpios = <&gpio0 71 GPIO_ACTIVE_HIGH>;
> +};
> diff --git a/arch/arm/dts/zynq-brsmarc2.dts b/arch/arm/dts/zynq-brsmarc2.dts
> new file mode 100644
> index 0000000..52fac02
> --- /dev/null
> +++ b/arch/arm/dts/zynq-brsmarc2.dts
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * B&R BRSMARC2 board DTS file (256 MiB variant)
> + *
> + * Copyright (C) 2019 B&R Industrial Automation GmbH
nit - any particular reason to have two spaces in front of Copyright?
> + */
> +
> +#include "zynq-brsmarc2-vxworks.dtsi"
> +
> +/ {
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x10000000>;
> + };
> +};
> diff --git a/arch/arm/dts/zynq-brsmarc2_r512.dts b/arch/arm/dts/zynq-brsmarc2_r512.dts
> new file mode 100644
> index 0000000..1eabf2c
> --- /dev/null
> +++ b/arch/arm/dts/zynq-brsmarc2_r512.dts
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * B&R BRSMARC2 board DTS file (512 MiB variant)
> + *
> + * Copyright (C) 2019 B&R Industrial Automation GmbH
> + */
> +
> +#include "zynq-brsmarc2-vxworks.dtsi"
> +
> +/ {
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x20000000>;
> + };
> +};
> diff --git a/board/BuR/zynq/.gitignore b/board/BuR/zynq/.gitignore
> new file mode 100644
> index 0000000..fa64fbc
> --- /dev/null
> +++ b/board/BuR/zynq/.gitignore
> @@ -0,0 +1 @@
> +./ps7_init_gpl.c
> diff --git a/board/BuR/zynq/MAINTAINERS b/board/BuR/zynq/MAINTAINERS
> new file mode 100644
> index 0000000..c6b3cfb
> --- /dev/null
> +++ b/board/BuR/zynq/MAINTAINERS
> @@ -0,0 +1,6 @@
> +BRSMARC2 BOARD
> +M: Hannes Schmelzer <hannes.schmelzer at br-automation.com>
> +S: Maintained
> +F: board/BuR/zynq/
> +F: include/configs/brsmarc2.h
> +F: configs/brsmarc2_defconfig
> diff --git a/board/BuR/zynq/Makefile b/board/BuR/zynq/Makefile
> new file mode 100644
> index 0000000..85a4b77
> --- /dev/null
> +++ b/board/BuR/zynq/Makefile
> @@ -0,0 +1,16 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2019 Hannes Schmelzer <oe5hpm at oevsv.at> -
> +# B&R Industrial Automation GmbH - http://www.br-automation.com
> +#
> +
> +hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE) | sed -e 's/zynq-//')
> +
> +obj-y := ../common/common.o
> +obj-y += ../common/br_resetc.o
> +obj-y += $(hw-platform-y)/board.o
> +
> +obj-$(CONFIG_SPL_BUILD) += $(hw-platform-y)/ps7_init_gpl.o
> +
> +# Suppress "warning: function declaration isn't a prototype"
> +CFLAGS_REMOVE_ps7_init_gpl.o := -Wstrict-prototypes
> diff --git a/board/BuR/zynq/brsmarc2/board.c b/board/BuR/zynq/brsmarc2/board.c
> new file mode 100644
> index 0000000..0331087
> --- /dev/null
> +++ b/board/BuR/zynq/brsmarc2/board.c
> @@ -0,0 +1,63 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Board functions for B&R BRSMARC2 Board
> + *
> + * Copyright (C) 2019 Hannes Schmelzer <oe5hpm at oevsv.at>
> + * B&R Industrial Automation GmbH - http://www.br-automation.com
> + *
> + */
> +#include <common.h>
> +#include <fdtdec.h>
> +#include <asm/arch/sys_proto.h>
> +#include <asm/gpio.h>
> +#include <i2c.h>
> +#include "../../common/bur_common.h"
> +#include "../../common/br_resetc.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +#ifdef CONFIG_SPL_BUILD
> +int board_init(void)
> +{
> + /* reset pulse for peripherals */
> + gpio_request(9, "nRESET_PS_3V3");
> + gpio_direction_output(9, 1);
> +
> + return 0;
> +}
> +#else
> +int board_init(void)
> +{
> + return 0;
> +}
> +#endif
> +
> +int board_late_init(void)
> +{
> + int rc;
> + struct udevice *i2cdev;
> +
> + br_resetc_bmode();
> + brdefaultip_setup(0, 0x57);
> +
> + rc = i2c_get_chip_for_busnum(0, 0x5D, 1, &i2cdev);
> + if (rc >= 0)
> + rc = dm_i2c_write(i2cdev, 0xEF, NULL, 0);
> + if (rc != 0)
> + printf("WARN: cannot write to LEDs!\n");
> +
> + return 0;
> +}
> +
> +int dram_init(void)
> +{
> + if (fdtdec_setup_mem_size_base() != 0)
> + return -EINVAL;
> +
> + /* simple test if ram_size determined from fdt is plausible */
> + gd->ram_size = get_ram_size((void *)gd->ram_base, gd->ram_size);
> +
> + zynq_ddrc_init();
> +
> + return 0;
> +}
you have this function here but still 2 DTs. Is this code working or not?
> diff --git a/board/BuR/zynq/brsmarc2/ps7_init_gpl.c b/board/BuR/zynq/brsmarc2/ps7_init_gpl.c
> new file mode 100644
> index 0000000..51ff8bf
> --- /dev/null
> +++ b/board/BuR/zynq/brsmarc2/ps7_init_gpl.c
> @@ -0,0 +1,276 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <asm/arch/ps7_init_gpl.h>
> +
> +unsigned long ps7_pll_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA220U),
> + EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00028000U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000120, 0x1F003F30U, 0x1F000200U),
> + EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U, 0x0012C220U),
> + EMIT_MASKWRITE(0XF8000104, 0x0007F000U, 0x00020000U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000002U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000124, 0xFFF00003U, 0x0C200003U),
> + EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U, 0x001452C0U),
> + EMIT_MASKWRITE(0XF8000108, 0x0007F000U, 0x0001E000U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000004U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000000U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_clock_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000128, 0x03F03F01U, 0x00700F01U),
> + EMIT_MASKWRITE(0XF8000138, 0x00000011U, 0x00000001U),
> + EMIT_MASKWRITE(0XF800013C, 0x00000011U, 0x00000011U),
> + EMIT_MASKWRITE(0XF8000140, 0x03F03F71U, 0x00500801U),
> + EMIT_MASKWRITE(0XF8000144, 0x03F03F71U, 0x00500141U),
> + EMIT_MASKWRITE(0XF800014C, 0x00003F31U, 0x00000501U),
> + EMIT_MASKWRITE(0XF8000150, 0x00003F33U, 0x00000A01U),
> + EMIT_MASKWRITE(0XF8000154, 0x00003F33U, 0x00000A01U),
> + EMIT_MASKWRITE(0XF8000158, 0x00003F33U, 0x00000503U),
> + EMIT_MASKWRITE(0XF800015C, 0x03F03F33U, 0x00501903U),
> + EMIT_MASKWRITE(0XF8000160, 0x007F007FU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000168, 0x00003F31U, 0x00000501U),
> + EMIT_MASKWRITE(0XF8000170, 0x03F03F30U, 0x00400500U),
> + EMIT_MASKWRITE(0XF80001C4, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU, 0x01DFC4CDU),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_ddr_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006004, 0x0007FFFFU, 0x00001040U),
> + EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU, 0x03C0780FU),
> + EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU, 0x02001001U),
> + EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU, 0x00014001U),
> + EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU, 0x00040EDAU),
> + EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU, 0x44D258D4U),
> + EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU, 0xB2024127U),
> + EMIT_MASKWRITE(0XF8006020, 0x7FDFFFFCU, 0x2B08B290U),
> + EMIT_MASKWRITE(0XF8006024, 0x0FFFFFC3U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006028, 0x00003FFFU, 0x00002007U),
> + EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU, 0x00000018U),
> + EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU, 0x00040970U),
> + EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU, 0x000116D4U),
> + EMIT_MASKWRITE(0XF8006038, 0x00000003U, 0x00000000U),
> + EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU, 0x00000777U),
> + EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU, 0xFFF00000U),
> + EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU, 0x0FFF6666U),
> + EMIT_MASKWRITE(0XF8006048, 0x0003F03FU, 0x0003C008U),
> + EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU, 0x77010800U),
> + EMIT_MASKWRITE(0XF8006058, 0x00010000U, 0x00000000U),
> + EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU, 0x00005003U),
> + EMIT_MASKWRITE(0XF8006060, 0x000017FFU, 0x0000003EU),
> + EMIT_MASKWRITE(0XF8006064, 0x00021FE0U, 0x00020000U),
> + EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU, 0x00284545U),
> + EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU, 0x00001610U),
> + EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU, 0x00466111U),
> + EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU, 0x00032222U),
> + EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU, 0x10200802U),
> + EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU, 0x0690CB73U),
> + EMIT_MASKWRITE(0XF80060AC, 0x000001FFU, 0x000001FEU),
> + EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU, 0x1CFFFFFFU),
> + EMIT_MASKWRITE(0XF80060B4, 0x00000200U, 0x00000200U),
> + EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU, 0x0020006AU),
> + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060C8, 0x000000FFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060DC, 0x00000001U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060F4, 0x0000000FU, 0x00000008U),
> + EMIT_MASKWRITE(0XF8006114, 0x000000FFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006118, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF800611C, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF8006120, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF8006124, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU, 0x0001D400U),
> + EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU, 0x0001C400U),
> + EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU, 0x0001BC00U),
> + EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU, 0x0001C800U),
> + EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU, 0x0000007AU),
> + EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU, 0x0000007DU),
> + EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU, 0x0000007EU),
> + EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU, 0x000000CAU),
> + EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU, 0x000000C6U),
> + EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU, 0x000000C4U),
> + EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU, 0x000000C7U),
> + EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU, 0x000000BAU),
> + EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU, 0x000000BDU),
> + EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU, 0x000000C0U),
> + EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU, 0x000000BEU),
> + EMIT_MASKWRITE(0XF8006190, 0x6FFFFEFEU, 0x00040080U),
> + EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU, 0x0001FD04U),
> + EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006208, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF800620C, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006210, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006214, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006218, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF800621C, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006220, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006224, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF80062A8, 0x00000FF5U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU, 0x00005125U),
> + EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU, 0x000012A8U),
> + EMIT_MASKPOLL(0XF8000B74, 0x00002000U),
> + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000081U),
> + EMIT_MASKPOLL(0XF8006054, 0x00000007U),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_mio_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU, 0x00000672U),
> + EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU, 0x00000672U),
> + EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU, 0x00000674U),
> + EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU, 0x00000674U),
> + EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU, 0x0018C068U),
> + EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU, 0x00F98068U),
> + EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU, 0x00F98068U),
> + EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU, 0x00F98068U),
> + EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU, 0x00000260U),
> + EMIT_MASKWRITE(0XF8000B70, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000B70, 0x00000021U, 0x00000020U),
> + EMIT_MASKWRITE(0XF8000B70, 0x07FEFFFFU, 0x00000823U),
> + EMIT_MASKWRITE(0XF8000700, 0x00003FFFU, 0x00000700U),
> + EMIT_MASKWRITE(0XF8000704, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000708, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF800070C, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000710, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000714, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000718, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF800071C, 0x00003FFFU, 0x00000700U),
> + EMIT_MASKWRITE(0XF8000720, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000724, 0x00003FFFU, 0x00000700U),
> + EMIT_MASKWRITE(0XF8000728, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF800072C, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF8000730, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF8000734, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF8000738, 0x00003FFFU, 0x000016E1U),
> + EMIT_MASKWRITE(0XF800073C, 0x00003FFFU, 0x000006E0U),
> + EMIT_MASKWRITE(0XF8000740, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000744, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000748, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF800074C, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000750, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000754, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000758, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF800075C, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000760, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000764, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000768, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF800076C, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000770, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000774, 0x00003FFFU, 0x00000205U),
> + EMIT_MASKWRITE(0XF8000778, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF800077C, 0x00003FFFU, 0x00000205U),
> + EMIT_MASKWRITE(0XF8000780, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000784, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000788, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF800078C, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000790, 0x00003FFFU, 0x00000205U),
> + EMIT_MASKWRITE(0XF8000794, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000798, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF800079C, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF80007A0, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007A4, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007A8, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007AC, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007B0, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007B4, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007B8, 0x00003FFFU, 0x00000321U),
> + EMIT_MASKWRITE(0XF80007BC, 0x00003FFFU, 0x00000320U),
> + EMIT_MASKWRITE(0XF80007C0, 0x00003FFFU, 0x00000320U),
> + EMIT_MASKWRITE(0XF80007C4, 0x00003FFFU, 0x00000321U),
> + EMIT_MASKWRITE(0XF80007C8, 0x00003FFFU, 0x00000340U),
> + EMIT_MASKWRITE(0XF80007CC, 0x00003FFFU, 0x00000340U),
> + EMIT_MASKWRITE(0XF80007D0, 0x00003FFFU, 0x00000280U),
> + EMIT_MASKWRITE(0XF80007D4, 0x00003FFFU, 0x00000280U),
> + EMIT_MASKWRITE(0XF8000830, 0x003F003FU, 0x00380037U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_peripherals_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000B48, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B4C, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B50, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B54, 0x00000180U, 0x00000180U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_MASKWRITE(0XE0000034, 0x000000FFU, 0x00000006U),
> + EMIT_MASKWRITE(0XE0000018, 0x0000FFFFU, 0x0000007CU),
> + EMIT_MASKWRITE(0XE0000000, 0x000001FFU, 0x00000017U),
> + EMIT_MASKWRITE(0XE0000004, 0x000003FFU, 0x00000020U),
> + EMIT_MASKWRITE(0XE000D000, 0x00080000U, 0x00080000U),
> + EMIT_MASKWRITE(0XF8007000, 0x20000000U, 0x00000000U),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_post_config_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000900, 0x0000000FU, 0x0000000FU),
> + EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +int ps7_post_config(void)
> +{
> + return ps7_config(ps7_post_config_3_0);
> +}
> +
> +int ps7_init(void)
> +{
> + int ret;
> +
> + ret = ps7_config(ps7_mio_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_pll_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_clock_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_ddr_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_peripherals_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + return PS7_INIT_SUCCESS;
> +}
> diff --git a/board/BuR/zynq/brsmarc2_r512/board.c b/board/BuR/zynq/brsmarc2_r512/board.c
> new file mode 100644
> index 0000000..a70c2aa
> --- /dev/null
> +++ b/board/BuR/zynq/brsmarc2_r512/board.c
> @@ -0,0 +1,2 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include "../brsmarc2/board.c"
Any reason for this? You can simply move it to zynq folder and have this
common for both boards variants.
> diff --git a/board/BuR/zynq/brsmarc2_r512/ps7_init_gpl.c b/board/BuR/zynq/brsmarc2_r512/ps7_init_gpl.c
> new file mode 100644
> index 0000000..d4e20d9
> --- /dev/null
> +++ b/board/BuR/zynq/brsmarc2_r512/ps7_init_gpl.c
> @@ -0,0 +1,276 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +#include <asm/arch/ps7_init_gpl.h>
> +
> +unsigned long ps7_pll_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000110, 0x003FFFF0U, 0x000FA220U),
> + EMIT_MASKWRITE(0XF8000100, 0x0007F000U, 0x00028000U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000100, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000120, 0x1F003F30U, 0x1F000200U),
> + EMIT_MASKWRITE(0XF8000114, 0x003FFFF0U, 0x0012C220U),
> + EMIT_MASKWRITE(0XF8000104, 0x0007F000U, 0x00020000U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000002U),
> + EMIT_MASKWRITE(0XF8000104, 0x00000010U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000124, 0xFFF00003U, 0x0C200003U),
> + EMIT_MASKWRITE(0XF8000118, 0x003FFFF0U, 0x001452C0U),
> + EMIT_MASKWRITE(0XF8000108, 0x0007F000U, 0x0001E000U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000010U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000001U, 0x00000000U),
> + EMIT_MASKPOLL(0XF800010C, 0x00000004U),
> + EMIT_MASKWRITE(0XF8000108, 0x00000010U, 0x00000000U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_clock_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000128, 0x03F03F01U, 0x00700F01U),
> + EMIT_MASKWRITE(0XF8000138, 0x00000011U, 0x00000001U),
> + EMIT_MASKWRITE(0XF800013C, 0x00000011U, 0x00000011U),
> + EMIT_MASKWRITE(0XF8000140, 0x03F03F71U, 0x00500801U),
> + EMIT_MASKWRITE(0XF8000144, 0x03F03F71U, 0x00500141U),
> + EMIT_MASKWRITE(0XF800014C, 0x00003F31U, 0x00000501U),
> + EMIT_MASKWRITE(0XF8000150, 0x00003F33U, 0x00000A01U),
> + EMIT_MASKWRITE(0XF8000154, 0x00003F33U, 0x00000A01U),
> + EMIT_MASKWRITE(0XF8000158, 0x00003F33U, 0x00000503U),
> + EMIT_MASKWRITE(0XF800015C, 0x03F03F33U, 0x00501903U),
> + EMIT_MASKWRITE(0XF8000160, 0x007F007FU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8000168, 0x00003F31U, 0x00000501U),
> + EMIT_MASKWRITE(0XF8000170, 0x03F03F30U, 0x00400500U),
> + EMIT_MASKWRITE(0XF80001C4, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF800012C, 0x01FFCCCDU, 0x01DFC4CDU),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_ddr_init_data_3_0[] = {
> + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006004, 0x0007FFFFU, 0x00001040U),
> + EMIT_MASKWRITE(0XF8006008, 0x03FFFFFFU, 0x03C0780FU),
> + EMIT_MASKWRITE(0XF800600C, 0x03FFFFFFU, 0x02001001U),
> + EMIT_MASKWRITE(0XF8006010, 0x03FFFFFFU, 0x00014001U),
> + EMIT_MASKWRITE(0XF8006014, 0x001FFFFFU, 0x0004159AU),
> + EMIT_MASKWRITE(0XF8006018, 0xF7FFFFFFU, 0x44D258D4U),
> + EMIT_MASKWRITE(0XF800601C, 0xFFFFFFFFU, 0xB2024127U),
> + EMIT_MASKWRITE(0XF8006020, 0x7FDFFFFCU, 0x2B08B290U),
> + EMIT_MASKWRITE(0XF8006024, 0x0FFFFFC3U, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006028, 0x00003FFFU, 0x00002007U),
> + EMIT_MASKWRITE(0XF800602C, 0xFFFFFFFFU, 0x00000018U),
> + EMIT_MASKWRITE(0XF8006030, 0xFFFFFFFFU, 0x00040970U),
> + EMIT_MASKWRITE(0XF8006034, 0x13FF3FFFU, 0x000116D4U),
> + EMIT_MASKWRITE(0XF8006038, 0x00000003U, 0x00000000U),
> + EMIT_MASKWRITE(0XF800603C, 0x000FFFFFU, 0x00000777U),
> + EMIT_MASKWRITE(0XF8006040, 0xFFFFFFFFU, 0xFFF00000U),
> + EMIT_MASKWRITE(0XF8006044, 0x0FFFFFFFU, 0x0FF66666U),
> + EMIT_MASKWRITE(0XF8006048, 0x0003F03FU, 0x0003C008U),
> + EMIT_MASKWRITE(0XF8006050, 0xFF0F8FFFU, 0x77010800U),
> + EMIT_MASKWRITE(0XF8006058, 0x00010000U, 0x00000000U),
> + EMIT_MASKWRITE(0XF800605C, 0x0000FFFFU, 0x00005003U),
> + EMIT_MASKWRITE(0XF8006060, 0x000017FFU, 0x0000003EU),
> + EMIT_MASKWRITE(0XF8006064, 0x00021FE0U, 0x00020000U),
> + EMIT_MASKWRITE(0XF8006068, 0x03FFFFFFU, 0x00284545U),
> + EMIT_MASKWRITE(0XF800606C, 0x0000FFFFU, 0x00001610U),
> + EMIT_MASKWRITE(0XF8006078, 0x03FFFFFFU, 0x00466111U),
> + EMIT_MASKWRITE(0XF800607C, 0x000FFFFFU, 0x00032222U),
> + EMIT_MASKWRITE(0XF80060A4, 0xFFFFFFFFU, 0x10200802U),
> + EMIT_MASKWRITE(0XF80060A8, 0x0FFFFFFFU, 0x0690CB73U),
> + EMIT_MASKWRITE(0XF80060AC, 0x000001FFU, 0x000001FEU),
> + EMIT_MASKWRITE(0XF80060B0, 0x1FFFFFFFU, 0x1CFFFFFFU),
> + EMIT_MASKWRITE(0XF80060B4, 0x00000200U, 0x00000200U),
> + EMIT_MASKWRITE(0XF80060B8, 0x01FFFFFFU, 0x0020006AU),
> + EMIT_MASKWRITE(0XF80060C4, 0x00000003U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060C8, 0x000000FFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060DC, 0x00000001U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060F0, 0x0000FFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80060F4, 0x0000000FU, 0x00000008U),
> + EMIT_MASKWRITE(0XF8006114, 0x000000FFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006118, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF800611C, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF8006120, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF8006124, 0x7FFFFFCFU, 0x40000001U),
> + EMIT_MASKWRITE(0XF800612C, 0x000FFFFFU, 0x0001D400U),
> + EMIT_MASKWRITE(0XF8006130, 0x000FFFFFU, 0x0001C400U),
> + EMIT_MASKWRITE(0XF8006134, 0x000FFFFFU, 0x0001BC00U),
> + EMIT_MASKWRITE(0XF8006138, 0x000FFFFFU, 0x0001C800U),
> + EMIT_MASKWRITE(0XF8006140, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006144, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006148, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF800614C, 0x000FFFFFU, 0x00000035U),
> + EMIT_MASKWRITE(0XF8006154, 0x000FFFFFU, 0x0000007AU),
> + EMIT_MASKWRITE(0XF8006158, 0x000FFFFFU, 0x0000007DU),
> + EMIT_MASKWRITE(0XF800615C, 0x000FFFFFU, 0x00000080U),
> + EMIT_MASKWRITE(0XF8006160, 0x000FFFFFU, 0x0000007EU),
> + EMIT_MASKWRITE(0XF8006168, 0x001FFFFFU, 0x000000CAU),
> + EMIT_MASKWRITE(0XF800616C, 0x001FFFFFU, 0x000000C6U),
> + EMIT_MASKWRITE(0XF8006170, 0x001FFFFFU, 0x000000C4U),
> + EMIT_MASKWRITE(0XF8006174, 0x001FFFFFU, 0x000000C7U),
> + EMIT_MASKWRITE(0XF800617C, 0x000FFFFFU, 0x000000BAU),
> + EMIT_MASKWRITE(0XF8006180, 0x000FFFFFU, 0x000000BDU),
> + EMIT_MASKWRITE(0XF8006184, 0x000FFFFFU, 0x000000C0U),
> + EMIT_MASKWRITE(0XF8006188, 0x000FFFFFU, 0x000000BEU),
> + EMIT_MASKWRITE(0XF8006190, 0x6FFFFEFEU, 0x00040080U),
> + EMIT_MASKWRITE(0XF8006194, 0x000FFFFFU, 0x0001FD04U),
> + EMIT_MASKWRITE(0XF8006204, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF8006208, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF800620C, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006210, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006214, 0x000703FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006218, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF800621C, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006220, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF8006224, 0x000F03FFU, 0x000003FFU),
> + EMIT_MASKWRITE(0XF80062A8, 0x00000FF5U, 0x00000000U),
> + EMIT_MASKWRITE(0XF80062AC, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_MASKWRITE(0XF80062B0, 0x003FFFFFU, 0x00005125U),
> + EMIT_MASKWRITE(0XF80062B4, 0x0003FFFFU, 0x000012A8U),
> + EMIT_MASKPOLL(0XF8000B74, 0x00002000U),
> + EMIT_MASKWRITE(0XF8006000, 0x0001FFFFU, 0x00000081U),
> + EMIT_MASKPOLL(0XF8006054, 0x00000007U),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_mio_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000B40, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B44, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B48, 0x00000FFFU, 0x00000672U),
> + EMIT_MASKWRITE(0XF8000B4C, 0x00000FFFU, 0x00000672U),
> + EMIT_MASKWRITE(0XF8000B50, 0x00000FFFU, 0x00000674U),
> + EMIT_MASKWRITE(0XF8000B54, 0x00000FFFU, 0x00000674U),
> + EMIT_MASKWRITE(0XF8000B58, 0x00000FFFU, 0x00000600U),
> + EMIT_MASKWRITE(0XF8000B5C, 0xFFFFFFFFU, 0x0018C068U),
> + EMIT_MASKWRITE(0XF8000B60, 0xFFFFFFFFU, 0x00F98068U),
> + EMIT_MASKWRITE(0XF8000B64, 0xFFFFFFFFU, 0x00F98068U),
> + EMIT_MASKWRITE(0XF8000B68, 0xFFFFFFFFU, 0x00F98068U),
> + EMIT_MASKWRITE(0XF8000B6C, 0x00007FFFU, 0x00000260U),
> + EMIT_MASKWRITE(0XF8000B70, 0x00000001U, 0x00000001U),
> + EMIT_MASKWRITE(0XF8000B70, 0x00000021U, 0x00000020U),
> + EMIT_MASKWRITE(0XF8000B70, 0x07FEFFFFU, 0x00000823U),
> + EMIT_MASKWRITE(0XF8000700, 0x00003FFFU, 0x00000700U),
> + EMIT_MASKWRITE(0XF8000704, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000708, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF800070C, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000710, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000714, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000718, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF800071C, 0x00003FFFU, 0x00000700U),
> + EMIT_MASKWRITE(0XF8000720, 0x00003FFFU, 0x00000702U),
> + EMIT_MASKWRITE(0XF8000724, 0x00003FFFU, 0x00000700U),
> + EMIT_MASKWRITE(0XF8000728, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF800072C, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF8000730, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF8000734, 0x00003FFFU, 0x000007A0U),
> + EMIT_MASKWRITE(0XF8000738, 0x00003FFFU, 0x000016E1U),
> + EMIT_MASKWRITE(0XF800073C, 0x00003FFFU, 0x000006E0U),
> + EMIT_MASKWRITE(0XF8000740, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000744, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000748, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF800074C, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000750, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000754, 0x00003FFFU, 0x00000302U),
> + EMIT_MASKWRITE(0XF8000758, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF800075C, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000760, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000764, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000768, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF800076C, 0x00003FFFU, 0x00000303U),
> + EMIT_MASKWRITE(0XF8000770, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000774, 0x00003FFFU, 0x00000205U),
> + EMIT_MASKWRITE(0XF8000778, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF800077C, 0x00003FFFU, 0x00000205U),
> + EMIT_MASKWRITE(0XF8000780, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000784, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000788, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF800078C, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000790, 0x00003FFFU, 0x00000205U),
> + EMIT_MASKWRITE(0XF8000794, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF8000798, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF800079C, 0x00003FFFU, 0x00000204U),
> + EMIT_MASKWRITE(0XF80007A0, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007A4, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007A8, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007AC, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007B0, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007B4, 0x00003FFFU, 0x00000380U),
> + EMIT_MASKWRITE(0XF80007B8, 0x00003FFFU, 0x00000321U),
> + EMIT_MASKWRITE(0XF80007BC, 0x00003FFFU, 0x00000320U),
> + EMIT_MASKWRITE(0XF80007C0, 0x00003FFFU, 0x00000320U),
> + EMIT_MASKWRITE(0XF80007C4, 0x00003FFFU, 0x00000321U),
> + EMIT_MASKWRITE(0XF80007C8, 0x00003FFFU, 0x00000340U),
> + EMIT_MASKWRITE(0XF80007CC, 0x00003FFFU, 0x00000340U),
> + EMIT_MASKWRITE(0XF80007D0, 0x00003FFFU, 0x00000280U),
> + EMIT_MASKWRITE(0XF80007D4, 0x00003FFFU, 0x00000280U),
> + EMIT_MASKWRITE(0XF8000830, 0x003F003FU, 0x00380037U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_peripherals_init_data_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000B48, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B4C, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B50, 0x00000180U, 0x00000180U),
> + EMIT_MASKWRITE(0XF8000B54, 0x00000180U, 0x00000180U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_MASKWRITE(0XE0000034, 0x000000FFU, 0x00000006U),
> + EMIT_MASKWRITE(0XE0000018, 0x0000FFFFU, 0x0000007CU),
> + EMIT_MASKWRITE(0XE0000000, 0x000001FFU, 0x00000017U),
> + EMIT_MASKWRITE(0XE0000004, 0x000003FFU, 0x00000020U),
> + EMIT_MASKWRITE(0XE000D000, 0x00080000U, 0x00080000U),
> + EMIT_MASKWRITE(0XF8007000, 0x20000000U, 0x00000000U),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_MASKDELAY(0XF8F00200, 1),
> + EMIT_EXIT(),
> +};
> +
> +unsigned long ps7_post_config_3_0[] = {
> + EMIT_WRITE(0XF8000008, 0x0000DF0DU),
> + EMIT_MASKWRITE(0XF8000900, 0x0000000FU, 0x0000000FU),
> + EMIT_MASKWRITE(0XF8000240, 0xFFFFFFFFU, 0x00000000U),
> + EMIT_WRITE(0XF8000004, 0x0000767BU),
> + EMIT_EXIT(),
> +};
> +
> +int ps7_post_config(void)
> +{
> + return ps7_config(ps7_post_config_3_0);
> +}
> +
> +int ps7_init(void)
> +{
> + int ret;
> +
> + ret = ps7_config(ps7_mio_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_pll_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_clock_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_ddr_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + ret = ps7_config(ps7_peripherals_init_data_3_0);
> + if (ret != PS7_INIT_SUCCESS)
> + return ret;
> +
> + return PS7_INIT_SUCCESS;
> +}
> diff --git a/board/BuR/zynq/config.mk b/board/BuR/zynq/config.mk
> new file mode 100644
> index 0000000..17e3d57
> --- /dev/null
> +++ b/board/BuR/zynq/config.mk
> @@ -0,0 +1,49 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2019 Hannes Schmelzer <oe5hpm at oevsv.at> -
> +# B&R Industrial Automation GmbH - http://www.br-automation.com
> +#
> +
> +hw-platform-y :=$(shell echo $(CONFIG_DEFAULT_DEVICE_TREE) | sed -e 's/zynq-//')
> +
> +payload_off :=$(shell printf "%d" $(CONFIG_SYS_SPI_U_BOOT_OFFS))
> +
> +fpga_path := $(shell echo $(KBUILD_SRC)/board/$(BOARDDIR)/$(hw-platform-y))
> +fpga_src := $(shell ls $(fpga_path)/*.bit 2>/dev/null)
> +fpga_file := $(shell echo $(fpga_src) | rev | cut -d/ -f1 | rev)
> +fpga_off := $(shell printf "%d" \
> + $(shell cat $(fpga_path)/${fpga_file}.offset 2>/dev/null))
> +flen_min := $(shell expr ${payload_off} + ${fpga_off})
> +
> +quiet_cmd_prodbin = PRODBIN $@ $(payload_off)
> +cmd_prodbin = \
> + dd if=/dev/zero bs=1 count=${flen_min} 2>/dev/null | tr "\000" "\377" >$@ && \
> + dd conv=notrunc bs=1 if=spl/boot.bin of=$@ seek=0 2>/dev/null && \
> + test -z ${fpga_src} && dd conv=notrunc bs=1 if=u-boot-dtb.img of=$@ seek=$(payload_off) 2>/dev/null && \
> + test -z ${fpga_src} || ( \
> + dd conv=notrunc bs=1 if=u-boot-dtb.img of=$@ seek=$(payload_off) 2>/dev/null; \
> + dd obs=1 if=$(fpga_file) of=$@ seek=$(fpga_off) 2>/dev/null \
> + )
> +
> +quiet_cmd_prodzip = SAPZIP $@
> +cmd_prodzip = \
> + test -d misc && rm -r misc; \
> + mkdir misc && \
> + cp spl/boot.bin misc/ && \
> + cp u-boot-dtb.img misc/ && \
> + zip -9 -r $@ misc/* >/dev/null $<
> +
> +quiet_cmd_fpga = FPGA $@ ($(fpga_file)) @ $(fpga_off)
> +cmd_fpga = test -z ${fpga_src} || cp ${fpga_src} $(fpga_file)
> +
> +$(hw-platform-y)_fpga:
> + $(call if_changed,fpga)
> +
> +$(hw-platform-y)_prog.bin: u-boot-dtb.img spl/boot.bin $(hw-platform-y)_fpga
> + $(call if_changed,prodbin)
> +
> +$(hw-platform-y)_prod.zip: $(hw-platform-y)_prog.bin
> + $(call if_changed,prodzip)
> +
> +
> +ALL-y += $(hw-platform-y)_prod.zip
> diff --git a/configs/brsmarc2_defconfig b/configs/brsmarc2_defconfig
> new file mode 100644
> index 0000000..0fb7b93
> --- /dev/null
> +++ b/configs/brsmarc2_defconfig
> @@ -0,0 +1,74 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_VENDOR="BuR"
> +CONFIG_SYS_CONFIG_NAME="brsmarc2"
> +CONFIG_ARCH_ZYNQ=y
> +CONFIG_SYS_TEXT_BASE=0x4000000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +# CONFIG_SPL_MMC_SUPPORT is not set
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x20000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL=y
> +CONFIG_ZYNQ_SDHCI_MAX_FREQ=100000000
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_BOOTDELAY=0
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_BOOTCOMMAND="run b_default"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_SPL_RAM_SUPPORT is not set
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_CMD_BOOTD is not set
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_EDITENV is not set
> +# CONFIG_CMD_ENV_EXISTS is not set
> +# CONFIG_CMD_CRC32 is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_FPGA_LOADFS=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_DHCP=y
> +# CONFIG_CMD_NFS is not set
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +# CONFIG_CMD_MISC is not set
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="zynq-brsmarc2"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_FPGA_XILINX=y
> +CONFIG_FPGA_ZYNQPL=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_CADENCE=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ZYNQ=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=30000000
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_PHY_NATSEMI=y
> +CONFIG_ZYNQ_GEM=y
> +CONFIG_ZYNQ_SERIAL=y
> +CONFIG_ZYNQ_QSPI=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_ULPI_VIEWPORT=y
> +CONFIG_USB_ULPI=y
> +CONFIG_USB_STORAGE=y
> +# CONFIG_EFI_LOADER is not set
> diff --git a/configs/brsmarc2_r512_defconfig b/configs/brsmarc2_r512_defconfig
> new file mode 100644
> index 0000000..c095d01
> --- /dev/null
> +++ b/configs/brsmarc2_r512_defconfig
> @@ -0,0 +1,74 @@
> +CONFIG_ARM=y
> +CONFIG_SYS_VENDOR="BuR"
> +CONFIG_SYS_CONFIG_NAME="brsmarc2"
> +CONFIG_ARCH_ZYNQ=y
> +CONFIG_SYS_TEXT_BASE=0x4000000
> +CONFIG_SPL_GPIO_SUPPORT=y
> +# CONFIG_SPL_MMC_SUPPORT is not set
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x20000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_SPL=y
> +CONFIG_ZYNQ_SDHCI_MAX_FREQ=100000000
> +CONFIG_OF_BOARD_SETUP=y
> +CONFIG_BOOTDELAY=0
> +CONFIG_USE_BOOTCOMMAND=y
> +CONFIG_BOOTCOMMAND="run b_default"
> +# CONFIG_DISPLAY_CPUINFO is not set
> +# CONFIG_SPL_RAM_SUPPORT is not set
> +CONFIG_HUSH_PARSER=y
> +# CONFIG_CMD_BOOTD is not set
> +CONFIG_CMD_BOOTZ=y
> +# CONFIG_CMD_IMI is not set
> +# CONFIG_CMD_XIMG is not set
> +# CONFIG_CMD_EXPORTENV is not set
> +# CONFIG_CMD_IMPORTENV is not set
> +# CONFIG_CMD_EDITENV is not set
> +# CONFIG_CMD_ENV_EXISTS is not set
> +# CONFIG_CMD_CRC32 is not set
> +# CONFIG_CMD_FLASH is not set
> +CONFIG_CMD_FPGA_LOADFS=y
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_I2C=y
> +# CONFIG_CMD_LOADB is not set
> +# CONFIG_CMD_LOADS is not set
> +CONFIG_CMD_MMC=y
> +CONFIG_CMD_SF=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_DHCP=y
> +# CONFIG_CMD_NFS is not set
> +CONFIG_CMD_MII=y
> +CONFIG_CMD_PING=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +# CONFIG_CMD_MISC is not set
> +CONFIG_CMD_EXT4=y
> +CONFIG_CMD_EXT4_WRITE=y
> +CONFIG_CMD_FAT=y
> +CONFIG_CMD_FS_GENERIC=y
> +# CONFIG_SPL_DOS_PARTITION is not set
> +CONFIG_DEFAULT_DEVICE_TREE="zynq-brsmarc2_r512"
> +CONFIG_ENV_IS_IN_SPI_FLASH=y
> +CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_SPL_DM_SEQ_ALIAS=y
> +CONFIG_FPGA_XILINX=y
> +CONFIG_FPGA_ZYNQPL=y
> +CONFIG_DM_GPIO=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_CADENCE=y
> +CONFIG_MMC_SDHCI=y
> +CONFIG_MMC_SDHCI_ZYNQ=y
> +CONFIG_SPI_FLASH=y
> +CONFIG_SF_DEFAULT_SPEED=30000000
> +CONFIG_SPI_FLASH_SPANSION=y
> +CONFIG_PHY_NATSEMI=y
> +CONFIG_ZYNQ_GEM=y
> +CONFIG_ZYNQ_SERIAL=y
> +CONFIG_ZYNQ_QSPI=y
> +CONFIG_USB=y
> +CONFIG_USB_EHCI_HCD=y
> +CONFIG_USB_ULPI_VIEWPORT=y
> +CONFIG_USB_ULPI=y
> +CONFIG_USB_STORAGE=y
> +# CONFIG_EFI_LOADER is not set
> diff --git a/include/configs/brsmarc2.h b/include/configs/brsmarc2.h
> new file mode 100644
> index 0000000..4ccdd2e
> --- /dev/null
> +++ b/include/configs/brsmarc2.h
> @@ -0,0 +1,157 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * specific parts for B&R brsmarc2 SoM
> + *
> + * Copyright (C) 2019 Hannes Schmelzer <oe5hpm at oevsv.at> -
> + * B&R Industrial Automation GmbH - http://www.br-automation.com
> + *
> + */
> +
> +#ifndef __CONFIG_BRSMARC2_H__
> +#define __CONFIG_BRSMARC2_H__
> +
> +#include <configs/bur_cfg_common.h>
you should move NETCONSOLE, PREBOOT to Kconfig from this file. .
> +
> +/* Cache options */
> +#define CONFIG_SYS_L2CACHE_OFF
> +#ifndef CONFIG_SYS_L2CACHE_OFF
> +# define CONFIG_SYS_L2_PL310
> +# define CONFIG_SYS_PL310_BASE 0xf8f02000
> +#endif
> +
> +#define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600
> +#define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR
> +#define CONFIG_SYS_TIMER_COUNTS_DOWN
> +#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4)
> +
> +/* Serial drivers */
> +#define CONFIG_BAUDRATE 115200
> +/* The following table includes the supported baudrates */
> +#define CONFIG_SYS_BAUDRATE_TABLE \
> + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
> +
> +/* Ethernet driver */
> +#ifdef CONFIG_ZYNQ_GEM
> +# define CONFIG_MII
This is in Kconfig already.
> +# define CONFIG_BOOTP_MAY_FAIL
you have this in your bur_cfg_common.h already
> +#endif
> +
> +/* MMC */
> +#define CONFIG_ZYNQ_HISPD_BROKEN
> +
> +/* USB */
> +#define CONFIG_EHCI_IS_TDI
> +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
> +
> +/* Allow to overwrite serial and ethaddr */
> +#define CONFIG_ENV_OVERWRITE
you have this in your bur_cfg_common.h already
> +
> +/* Environment */
> +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
> +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
> + CONFIG_ENV_SECT_SIZE)
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> +BUR_COMMON_ENV \
> +"board_id=0xFF\0" \
> +"autoload=0\0" \
this is the part of default variables. Can't you just use it from there?
CONFIG_SYS_AUTOLOAD
> +"scradr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
> +"dtbaddr=0x4000000\0" \
> +"loadaddr=0x2000000\0" \
> +"fpgaaddr=fdt get value fpgabase /fpga bur,updaddr;" \
> +" fdt get value fpgasize /fpga bur,updsize\0" \
> +"fpga=setenv fpgastatus disabled; run fpgaaddr;" \
> +" sf read ${loadaddr} ${fpgabase} ${fpgasize} &&" \
> +" fpga loadb 0 ${loadaddr} ${fpgasize} && setenv fpgastatus okay\0" \
> +"fpgastatus=disabled\0" \
> +"fpgaupd=run fpgaaddr && tftp ${loadaddr} X20CP04xx.bit &&" \
> +" sf erase ${fpgabase} +${filesize} &&" \
> +" sf write ${loadaddr} ${fpgabase} ${filesize}\0" \
> +"netupd=tftp ${loadaddr} boot.bin && sf probe &&" \
> +" sf erase 0 +${filesize} && sf write ${loadaddr} 0 ${filesize} &&" \
> +" tftp ${loadaddr} u-boot-dtb.img &&" \
> +" sf erase 0x40000 +${filesize} && sf write ${loadaddr} 0x40000 ${filesize}\0" \
> +"cfgscr=mw ${dtbaddr} 0;" \
> +" sf probe && sf read ${scradr} 0xC0000 0x10000 && source ${scradr};" \
> +" fdt addr ${dtbaddr} || cp ${fdtcontroladdr} ${dtbaddr} 4000\0" \
> +"vxargs=setenv bootargs gem(0,0)host:vxWorks h=${serverip}" \
> +" e=${ipaddr}:${netmask} g=${gatewayip} u=vxWorksFTP pw=vxWorks\0" \
> +"vxfdt=fdt addr ${dtbaddr}; fdt resize 0x10000;" \
> +" fdt set /fpga status ${fpgastatus};" \
> +" fdt boardsetup\0" \
> +"startvx=run vxargs && mw 0x1100 0 && run vxfdt &&" \
> +" bootm ${loadaddr} - ${dtbaddr}\0" \
> +"b_break=0\0" \
> +"b_tgts_std=mmc spi usb0 net0 net1\0" \
> +"b_tgts_rcy=spi usb0 net0 net1\0" \
> +"b_tgts_pme=usb0 net0 net1 mmc spi\0" \
> +"b_deftgts=if test ${b_mode} = 12; then setenv b_tgts ${b_tgts_pme};" \
> +" elif test ${b_mode} = 0; then setenv b_tgts ${b_tgts_rcy};" \
> +" else setenv b_tgts ${b_tgts_std}; fi\0" \
> +"b_mmc=run fpga; mmc dev 0; load mmc 0 ${loadaddr} arimg && run startvx\0" \
> +"b_spi=run fpga; sf read ${loadaddr} 900000 700000 && run startvx\0" \
> +"b_net0=tftp ${scradr} netscr-brsmarc2-${board_id}.img && source ${scradr}\0" \
> +"b_net1=tftp ${scradr} netscript.img && source ${scradr}\0" \
> +"b_usb0=usb start && load usb 0 ${scradr} bootscr.img && source ${scradr}\0" \
> +"b_default=run b_deftgts; for target in ${b_tgts};"\
> +" do run b_${target}; if test ${b_break} = 1; then; exit; fi; done\0"
> +
> +#define CONFIG_SYS_LOAD_ADDR 0xC0000 /*
> + * default load and execution
> + * address for loads / scripts
> + */
> +/* Support both device trees and ATAGs. */
> +#define CONFIG_CMDLINE_TAG
> +#define CONFIG_SETUP_MEMORY_TAGS
> +#define CONFIG_INITRD_TAG
> +#define CONFIG_MACH_TYPE 0xFFFFFFFF
> +
> +/* Miscellaneous configurable options */
> +#define CONFIG_CLOCKS
> +#define CONFIG_SYS_CONSOLE_INFO_QUIET
> +#define CONFIG_SYS_BOOTM_LEN (32 * 1024 * 1024)
> +/* Physical Memory map */
> +#define CONFIG_SYS_TEXT_BASE 0x4000000
> +
> +#define CONFIG_SYS_SDRAM_BASE 0
> +
> +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
> +
> +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
> +#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
> +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
> + CONFIG_SYS_INIT_RAM_SIZE - \
> + GENERATED_GBL_DATA_SIZE)
> +/* SPL part */
> +#ifdef CONFIG_SPL_BUILD
> +#define CONFIG_SPL_I2C_SUPPORT
> +
> +/* Disable dcache for SPL just for sure */
> +#define CONFIG_SYS_DCACHE_OFF
> +
> +#ifdef CONFIG_ZYNQ_QSPI
> +# define CONFIG_SPL_SPI_LOAD
> +# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
> +#endif /* CONFIG_ZYNQ_QSPI */
> +
> +/* SP location before relocation, must use scratch RAM */
> +#define CONFIG_SPL_TEXT_BASE 0x0
> +/* 3 * 64kB blocks of OCM - one is on the top because of bootrom */
> +#define CONFIG_SPL_MAX_SIZE 0x30000
> +/* The highest 64k OCM address */
> +#define OCM_HIGH_ADDR 0xffff0000
> +/* Just define any reasonable size */
> +#define CONFIG_SPL_STACK_SIZE 0x2000
> +/* SPL stack position - and stack goes down */
> +#define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE)
> +/* On the top of OCM space */
> +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \
> + GENERATED_GBL_DATA_SIZE)
> +
> +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x8000
> +/* BSS setup */
> +#define CONFIG_SPL_BSS_START_ADDR 0x100000
> +#define CONFIG_SPL_BSS_MAX_SIZE 0x100000
> +#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
> +#endif /* CONFIG_SPL_BUILD */
> +#endif /* __CONFIG_BRSMARC2_H__ */
>
I think that this file should be designed differently.
You should #include <configs/zynq-common.h> first and then change
whatever you don't like.
There are a lot of things which are just c&p from this file and it will
be hard to fix all zynq boards by changing one file.
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190527/2a9816b2/attachment.sig>
More information about the U-Boot
mailing list