[U-Boot] [PATCH 4/5] apalis_imx6: use UUID for rootfs
Marcel Ziswiler
marcel.ziswiler at toradex.com
Fri May 24 08:04:34 UTC 2019
On Fri, 2019-05-24 at 09:51 +0200, Marcel Ziswiler wrote:
> On Mon, 2019-05-13 at 12:15 +0300, Igor Opaniuk wrote:
> > 1. Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
> > partition. This fixes the issue, when MMC controllers are probed in
> > a different order in U-boot and Linux kernel.
> > 2. Fix legacy USB command (both sdboot and usbboot can be used
> > now).
> >
> > Signed-off-by: Igor Opaniuk <igor.opaniuk at toradex.com>
> > ---
> > include/configs/apalis_imx6.h | 62 ++++++++++++++++++++++++-------
> > --
> > --
> > 1 file changed, 42 insertions(+), 20 deletions(-)
> >
> > diff --git a/include/configs/apalis_imx6.h
> > b/include/configs/apalis_imx6.h
> > index 96169f55f0..04b21a3128 100644
> > --- a/include/configs/apalis_imx6.h
> > +++ b/include/configs/apalis_imx6.h
> > @@ -125,16 +125,21 @@
> > "imx6q-apalis-cam-eval.dtb fat 0 1"
> >
> > #define EMMC_BOOTCMD \
> > - "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime
>
> Here we should probably also transition to ro instead as e.g. systemd
> will re-mount rw,whatever later.
>
> > rootfstype=ext4 " \
> > - "rootwait\0" \
> > - "emmcboot=run setup; " \
> > + "set_emmcargs emmcargs ip=off root=PARTUUID=${uuid} rw,noatime
Sorry, above comment was meant to go here (;-p).
> > " \
> > + "rootfstype=ext4 rootwait\0" \
> > + "emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
> > "setenv bootargs ${defargs} ${emmcargs} ${setupargs} "
> > \
> > "${vidargs}; echo Booting from internal eMMC chip...; "
> > \
> > - "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
> > - "${boot_file} && run fdt_fixup && " \
> > + "run emmcdtbload; load mmc ${emmcdev}:${emmcbootpart} "
> > \
> > + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
> > "bootz ${kernel_addr_r} ${dtbparam}\0" \
> > - "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
> > - "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" &&
> > true\0"
> > + "emmcbootpart=1\0" \
> > + "emmcdev=0\0" \
> > + "emmcdtbload=setenv dtbparam; load mmc
> > ${emmcdev}:${emmcbootpart} " \
> > + "${fdt_addr_r} ${fdt_file} && " \
> > + "setenv dtbparam \" - ${fdt_addr_r}\" && true\0" \
> > + "emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
> > + "emmcrootpart=2\0"
> >
> > #define MEM_LAYOUT_ENV_SETTINGS \
> > "bootm_size=0x20000000\0" \
> > @@ -157,27 +162,43 @@
> > "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
> >
> > #define SD_BOOTCMD \
> > - "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime
>
> Same here.
>
> > rootfstype=ext4 " \
> > - "rootwait\0" \
> > - "sdboot=run setup; " \
> > + "set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid}
> > rw,noatime
And here (;-p).
> > " \
> > + "rootfstype=ext4 rootwait\0" \
> > + "sdboot=run setup; run sdfinduuid; run set_sdargs; " \
> > "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
> > "${vidargs}; echo Booting from SD card; " \
> > - "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
> > - "${boot_file} && run fdt_fixup && " \
> > + "run sddtbload; load mmc ${sddev}:${sdbootpart} " \
> > + "${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
> > "bootz ${kernel_addr_r} ${dtbparam}\0" \
> > - "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
> > - "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" &&
> > true\0"
> > + "sdbootpart=1\0" \
> > + "sddev=1\0" \
> > + "sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
> > + "${fdt_addr_r} " \
> > + "${fdt_file} && setenv dtbparam \" - " \
> > + "${fdt_addr_r}\" && true\0" \
> > + "sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
> > + "sdrootpart=2\0"
> > +
> >
> > #define USB_BOOTCMD \
> > - "usbargs=ip=off root=/dev/sda2 rw,noatime
>
> And here.
>
> > rootfstype=ext4 " \
> > - "rootwait\0" \
> > - "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
> > + "set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid}
> > rw,noatime
And here (;-p).
> > " \
> > + "rootfstype=ext4 rootwait\0" \
> > + "usbboot=run setup; usb start; run usbfinduuid; run
> > set_usbargs; " \
> > + "setenv bootargs ${defargs} ${setupargs} " \
> > "${usbargs} ${vidargs}; echo Booting from USB stick...;
> > " \
> > - "usb start && run usbdtbload; load usb 0:1
> > ${kernel_addr_r} " \
> > + "run usbdtbload; load usb " \
> > + "${usbdev}:${usbbootpart} ${kernel_addr_r} " \
> > "${boot_file} && run fdt_fixup && " \
> > "bootz ${kernel_addr_r} ${dtbparam}\0" \
> > - "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
> > - "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" &&
> > true\0"
> > + "usbbootpart=1\0" \
> > + "usbdev=0\0" \
> > + "usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart}
> > "\
> > + "${fdt_addr_r} " \
> > + "${fdt_file} && setenv dtbparam \" - " \
> > + "${fdt_addr_r}\" && true\0" \
> > + "usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
> > + "usbrootpart=2\0"
> > +
> >
> > #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
> > #define FDT_FILE "imx6q-apalis-eval.dtb"
> > @@ -201,6 +222,7 @@
> > MEM_LAYOUT_ENV_SETTINGS \
> > NFS_BOOTCMD \
> > SD_BOOTCMD \
> > + USB_BOOTCMD \
> > "setethupdate=if env exists ethaddr; then; else setenv ethaddr
> > " \
> > "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
> > "flash_eth.img && source ${loadaddr}\0" \
>
> With the above fixed:
>
> Acked-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
More information about the U-Boot
mailing list