[U-Boot] [PATCH 2/8] ARM: dts: imx: vining2000: Import VINING|2000 DT from Linux
Marek Vasut
marex at denx.de
Fri May 17 20:25:22 UTC 2019
Import iMX6SX VINING|2000 device tree from Linux 5.1.1 b724e9356404 .
Enable DT control in full U-Boot .
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Cc: Silvio Fricke <silvio.fricke at softing.com>
Cc: Stefano Babic <sbabic at denx.de>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx6sx-softing-vining-2000.dts | 573 ++++++++++++++++++++
configs/vining_2000_defconfig | 6 +-
3 files changed, 580 insertions(+), 2 deletions(-)
create mode 100644 arch/arm/dts/imx6sx-softing-vining-2000.dts
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 0ec7bc987d..1dcfa9a535 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -565,7 +565,8 @@ dtb-$(CONFIG_MX6SLL) += imx6sll-evk.dtb
dtb-$(CONFIG_MX6SX) += \
imx6sx-sabreauto.dtb \
- imx6sx-sdb.dtb
+ imx6sx-sdb.dtb \
+ imx6sx-softing-vining-2000.dtb
dtb-$(CONFIG_MX6UL) += \
imx6ul-geam.dtb \
diff --git a/arch/arm/dts/imx6sx-softing-vining-2000.dts b/arch/arm/dts/imx6sx-softing-vining-2000.dts
new file mode 100644
index 0000000000..2bc51623a8
--- /dev/null
+++ b/arch/arm/dts/imx6sx-softing-vining-2000.dts
@@ -0,0 +1,573 @@
+/*
+ * Copyright (C) 2016 Christoph Fritz <chf.fritz at googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include "imx6sx.dtsi"
+
+/ {
+ model = "Softing VIN|ING 2000";
+ compatible = "samtec,imx6sx-vining-2000", "fsl,imx6sx";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory at 80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x40000000>;
+ };
+
+ reg_usb_otg1_vbus: regulator-usb_otg1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg1_vbus";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1>;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_peri_3v3: regulator-peri_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "peri_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ red {
+ label = "red";
+ max-brightness = <255>;
+ pwms = <&pwm6 0 50000>;
+ };
+
+ green {
+ label = "green";
+ max-brightness = <255>;
+ pwms = <&pwm2 0 50000>;
+ };
+
+ blue {
+ label = "blue";
+ max-brightness = <255>;
+ pwms = <&pwm1 0 50000>;
+ };
+ };
+};
+
+&adc1 {
+ vref-supply = <®_peri_3v3>;
+ status = "okay";
+};
+
+&cpu0 {
+ /*
+ * This board has a shared rail of reg_arm and reg_soc (supplied by
+ * sw1a_reg) which is modeled below, but still this module behaves
+ * unstable without higher voltages. Hence, set higher voltages here.
+ */
+ operating-points = <
+ /* kHz uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+ fsl,soc-operating-points = <
+ /* ARM kHz SOC uV */
+ 996000 1250000
+ 792000 1175000
+ 396000 1175000
+ 198000 1175000
+ >;
+};
+
+&ecspi4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi4>;
+ cs-gpios = <&gpio7 4 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-supply = <®_peri_3v3>;
+ phy-reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <5>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet0-phy at 0 {
+ reg = <0>;
+ max-speed = <100>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
+ phy-supply = <®_peri_3v3>;
+ phy-reset-gpios = <&gpio5 21 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <5>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet1-phy at 0 {
+ reg = <0>;
+ max-speed = <100>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ proximity: sx9500 at 28 {
+ compatible = "semtech,sx9500";
+ reg = <0x28>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sx9500>;
+ interrupt-parent = <&gpio2>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ pmic: pfuze100 at 8 {
+ compatible = "fsl,pfuze200";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpios>;
+
+ pinctrl_ecspi4: ecspi4grp {
+ fsl,pins = <
+ MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x130b1
+ MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x130b1
+ MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x130b1
+ MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x30b0
+ >;
+ };
+
+ pinctrl_enet1: enet1grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x30c1
+ MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x30c1
+ MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0f9
+ MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0f9
+ MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x30c1
+ MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0f9
+ MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4000a038
+ /* LAN8720 PHY Reset */
+ MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x10b0
+ /* MDIO */
+ MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0f9
+ MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0f9
+ /* IRQ from PHY */
+ MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x10b0
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x1b0b0
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x1b0b0
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x1b0b0
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x1b0b0
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x1b0b0
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x1b0b0
+ MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x4000a038
+ /* LAN8720 PHY Reset */
+ MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x10b0
+ /* MDIO */
+ MX6SX_PAD_ENET1_COL__ENET2_MDC 0xa0f9
+ MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0xa0f9
+ /* IRQ from PHY */
+ MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x10b0
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x1b0b0
+ MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x1b0b0
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x1b0b0
+ MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x1b0b0
+ >;
+ };
+
+ pinctrl_gpios: gpiosgrp {
+ fsl,pins = <
+ /* reset external uC */
+ MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x10b0
+ /* IRQ from external uC */
+ MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x10b0
+ /* overcurrent detection */
+ MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x10b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1
+ MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6SX_PAD_NAND_ALE__I2C3_SDA 0x4001b8b1
+ MX6SX_PAD_NAND_CLE__I2C3_SCL 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp-1 {
+ fsl,pins = <
+ /* blue LED */
+ MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp-1 {
+ fsl,pins = <
+ /* green LED */
+ MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm6: pwm6grp-1 {
+ fsl,pins = <
+ /* red LED */
+ MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x1b0b1
+ >;
+ };
+
+ pinctrl_sx9500: sx9500grp {
+ fsl,pins = <
+ /* Reset */
+ MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x838
+ /* IRQ */
+ MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x70e0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1
+ MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usb_otg1: usbotg1grp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0
+ >;
+ };
+
+ pinctrl_usb_otg1_id: usbotg1idgrp {
+ fsl,pins = <
+ MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_50mhz: usdhc2grp-50mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
+ MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x1b000
+ MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x10b0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100b9
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170b9
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170b9
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170b9
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170b9
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x100f9
+ MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x170f9
+ MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x170f9
+ MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x170f9
+ MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x170f9
+ MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x170f9
+ >;
+ };
+
+ pinctrl_usdhc4_50mhz: usdhc4grp-50mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x17059
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x17059
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x17059
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x17059
+ MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x17068
+ >;
+ };
+
+ pinctrl_usdhc4_100mhz: usdhc4-100mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100b9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170b9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170b9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170b9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170b9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170b9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170b9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170b9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170b9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc4_200mhz: usdhc4-200mhz {
+ fsl,pins = <
+ MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x100f9
+ MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x170f9
+ MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x170f9
+ MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x170f9
+ MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x170f9
+ MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x170f9
+ MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x170f9
+ MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x170f9
+ MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x170f9
+ MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x170f9
+ >;
+ };
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&pwm6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm6>;
+ status = "okay";
+};
+
+®_arm {
+ vin-supply = <&sw1a_reg>;
+};
+
+®_soc {
+ vin-supply = <&sw1a_reg>;
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbotg1 {
+ vbus-supply = <®_usb_otg1_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_otg1_id>;
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
+ cd-gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
+ keep-power-in-suspend;
+ status = "okay";
+};
+
+&usdhc4 {
+ /* hs200-mode is currently unsupported because Vccq is on 3.1V, but
+ * not on necessary 1.8V.
+ */
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc4_50mhz>;
+ pinctrl-1 = <&pinctrl_usdhc4_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc4_200mhz>;
+ bus-width = <8>;
+ keep-power-in-suspend;
+ non-removable;
+ cap-mmc-hw-reset;
+ status = "okay";
+};
diff --git a/configs/vining_2000_defconfig b/configs/vining_2000_defconfig
index 0f9069381e..958b7bb5ac 100644
--- a/configs/vining_2000_defconfig
+++ b/configs/vining_2000_defconfig
@@ -1,9 +1,12 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
CONFIG_TARGET_SOFTING_VINING_2000=y
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_NR_DRAM_BANKS=1
# CONFIG_CMD_BMODE is not set
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/softing/vining_2000/imximage.cfg"
CONFIG_BOOTDELAY=0
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
@@ -31,6 +34,8 @@ CONFIG_CMD_EXT4_WRITE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_EFI_PARTITION=y
+CONFIG_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6sx-softing-vining-2000"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_SUPPORT_EMMC_BOOT=y
@@ -42,4 +47,3 @@ CONFIG_USB=y
CONFIG_USB_STORAGE=y
CONFIG_USB_HOST_ETHER=y
CONFIG_USB_ETHER_ASIX=y
-CONFIG_OF_LIBFDT=y
--
2.20.1
More information about the U-Boot
mailing list