[U-Boot] Cannot boot mx6qsabred with 2019.07-rc2

[Simon Goldschmidt]

Am 24.05.2019 um 19:43 schrieb Tom Rini:
> On Thu, May 23, 2019 at 01:48:21PM -0300, Fabio Estevam wrote:
>> On Thu, May 23, 2019 at 1:11 PM Jagan Teki <jagan at amarulasolutions.com> wrote:
>>
>>> Don't know whether this is SPL size issue or not? can you try
>>> SPL_OF_PLATDATA and TINY* I can see the size reduced with 64512 bytes
>>> (one build issue on fdtdec_get_int undefined)
>>
>> Yes, it does not build with CONFIG_SPL_OF_PLATDATA:
>>
>> lib/built-in.o: In function `fdtdec_parse_phandle_with_args':
>> /home/fabio/u-boot/lib/fdtdec.c:788: undefined reference to `fdtdec_get_int'
>> drivers/built-in.o: In function `fsl_esdhc_probe':
>> /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1480: undefined reference
>> to `fdtdec_get_int'
>> /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1482: undefined reference
>> to `fdtdec_get_int'
>> /home/fabio/u-boot/drivers/mmc/fsl_esdhc.c:1485: undefined reference
>> to `fdtdec_get_int'
>> scripts/Makefile.spl:404: recipe for target 'spl/u-boot-spl' failed
>> make[1]: *** [spl/u-boot-spl] Error 1
>>
>> Thanks for the suggestions, but at this point I prefer to go with the
>> removal of CONFIG_SPL_DM.
>>
>> For 2019.07 it would be really nice if we could fix these two issues:
>>
>> 1. Allow to load a FIT image via Serial Download Protocol
>>
>> 2. Detect the SPL size overflow in build-time
> 
> For #2, I am very hopeful we can pull in Simon Goldschmidt's patch that
> allows us to set the size limit in such ways as to catch overflows like
> this.

Hehe, right, I'm feeling the pressure ;-)

Cheers,
Simon