[U-Boot] [PATCH v2 5/9] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0
Kever Yang
kever.yang at rock-chips.com
Tue May 7 05:01:29 UTC 2019
Hi Philipp and Klaus,
Does this patch OK for your boards?
Thanks,
-Kever
On 04/28/2019 05:09 PM, Jagan Teki wrote:
> Right now puma rk3399 board need to copy bl31-rk3399.bin and
> rk3399m0.bin into u-boot source directory to make use of building
> u-boot.itb.
>
> So, add environment variable
> - BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
> platform BL31 env)
> - PMUM0 for rk3399m0.bin
>
> If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
> notify with warning about which document to refer for more information
> like this:
>
> WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
> Please read Building section in doc/README.rockchip
> WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
> Please read Building section in doc/README.rockchip
>
> Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
> ---
> .../{fit_spl_atf.its => fit_spl_atf.sh} | 46 ++++++++++++++++---
> configs/puma-rk3399_defconfig | 2 +-
> doc/README.rockchip | 8 ++--
> 3 files changed, 45 insertions(+), 11 deletions(-)
> rename board/theobroma-systems/puma_rk3399/{fit_spl_atf.its => fit_spl_atf.sh} (50%)
> mode change 100644 => 100755
>
> diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> old mode 100644
> new mode 100755
> similarity index 50%
> rename from board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> rename to board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> index 530f059f3d..517fad40a1
> --- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> +++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> @@ -1,3 +1,31 @@
> +#!/bin/sh
> +#
> +# Copyright (C) 2019 Jagan Teki <jagan at amarulasolutions.com>
> +#
> +# Based on the board/sunxi/mksunxi_fit_atf.sh
> +#
> +# Script to generate FIT image source for 64-bit puma boards with
> +# U-Boot proper, ATF, PMU firmware and devicetree.
> +#
> +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
> +
> +[ -z "$BL31" ] && BL31="bl31.bin"
> +
> +if [ ! -f $BL31 ]; then
> + echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
> + echo "Please read Building section in doc/README.rockchip" >&2
> + BL31=/dev/null
> +fi
> +
> +[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
> +
> +if [ ! -f $PMUM0 ]; then
> + echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
> + echo "Please read Building section in doc/README.rockchip" >&2
> + PMUM0=/dev/null
> +fi
> +
> +cat << __HEADER_EOF
> /* SPDX-License-Identifier: GPL-2.0+ OR X11 */
> /*
> * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
> @@ -14,16 +42,15 @@
> images {
> uboot {
> description = "U-Boot (64-bit)";
> - data = /incbin/("../../../u-boot-nodtb.bin");
> + data = /incbin/("u-boot-nodtb.bin");
> type = "standalone";
> - os = "U-Boot";
> arch = "arm64";
> compression = "none";
> - load = <0x00200000>;
> + load = <0x4a000000>;
> };
> atf {
> description = "ARM Trusted Firmware";
> - data = /incbin/("../../../bl31-rk3399.bin");
> + data = /incbin/("$BL31");
> type = "firmware";
> arch = "arm64";
> os = "arm-trusted-firmware";
> @@ -33,17 +60,20 @@
> };
> pmu {
> description = "Cortex-M0 firmware";
> - data = /incbin/("../../../rk3399m0.bin");
> + data = /incbin/("$PMUM0");
> type = "pmu-firmware";
> compression = "none";
> load = <0x180000>;
> };
> fdt {
> description = "RK3399-Q7 (Puma) flat device-tree";
> - data = /incbin/("../../../u-boot.dtb");
> + data = /incbin/("u-boot.dtb");
> type = "flat_dt";
> compression = "none";
> };
> +__HEADER_EOF
> +
> +cat << __CONF_HEADER_EOF
> };
>
> configurations {
> @@ -54,5 +84,9 @@
> loadables = "uboot", "pmu";
> fdt = "fdt";
> };
> +__CONF_HEADER_EOF
> +
> +cat << __ITS_EOF
> };
> };
> +__ITS_EOF
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index e5ea2fe0b3..98b2dd6f02 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -15,7 +15,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
> CONFIG_SPL_SPI_SUPPORT=y
> CONFIG_DEBUG_UART=y
> CONFIG_NR_DRAM_BANKS=1
> -CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
> +CONFIG_SPL_FIT_GENERATOR="board/theobroma-systems/puma_rk3399/fit_spl_atf.sh"
> CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
> CONFIG_MISC_INIT_R=y
> # CONFIG_DISPLAY_CPUINFO is not set
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 98a3824e2c..88a4593392 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -137,8 +137,8 @@ For example:
> => cd arm-trusted-firmware
> => make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
>
> - (copy bl31.bin into U-Boot root dir)
> - => cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
> + (export bl31.bin)
> + => export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
>
> For rest of rk3399 boards.
>
> @@ -162,8 +162,8 @@ For example:
> (export cross compiler path for Cortex-M0 PMU)
> => make CROSS_COMPILE=arm-cortex_m0-eabi-
>
> - (copy rk3399m0.bin into U-Boot root dir)
> - => cp rk3399m0.bin /path/to/u-boot
> + (export rk3399m0.bin)
> + => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin
>
> - Compile U-Boot
>
More information about the U-Boot
mailing list