[U-Boot] [PATCH 0/3] Add Avenger96 board support

Patrice CHOTARD patrice.chotard at st.com
Thu May 2 07:27:14 UTC 2019


Hi Manivannan

On 4/29/19 2:03 PM, Manivannan Sadhasivam wrote:
> Hello,
> 
> This patchset adds board support for Avenger96, a 96Boards Consumer
> Edition board from Arrow Electronics. This board is based on the
> STM32MP1 MPU and the board support is added under st boards since
> there are no significance changes required to boot u-boot on this
> board other than the dts.
> 
> More information about this board can be found in 96Boards website:
> https://www.96boards.org/product/avenger96/
> 
> PS: I only managed to boot u-boot as SSBL with TF-A as FSBL. U-boot
> SPL way of booting is not working.

What are the symptoms ?

Patrice

> 
> Thanks,
> Mani
> 
> Manivannan Sadhasivam (3):
>   arm: dts: stm32mp157: Add missing pinctrl definitions
>   board: stm32mp1: Add Avenger96 board support
>   arm: mach-stm32mp: Add newline to the MAC error message
> 
>  arch/arm/dts/Makefile                         |   1 +
>  arch/arm/dts/stm32mp157-pinctrl.dtsi          |  63 +++
>  .../arm/dts/stm32mp157a-avenger96-u-boot.dtsi | 177 +++++++++
>  arch/arm/dts/stm32mp157a-avenger96.dts        | 362 ++++++++++++++++++
>  arch/arm/mach-stm32mp/cpu.c                   |   2 +-
>  board/st/stm32mp1/README                      |  23 ++
>  6 files changed, 627 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
>  create mode 100644 arch/arm/dts/stm32mp157a-avenger96.dts
> 


More information about the U-Boot mailing list