[U-Boot] [PATCH 0/3] Add Avenger96 board support

[Manivannan Sadhasivam]

Hi Patrick,

On Thu, May 02, 2019 at 07:27:14AM +0000, Patrice CHOTARD wrote:
> Hi Manivannan
> 
> On 4/29/19 2:03 PM, Manivannan Sadhasivam wrote:
> > Hello,
> > 
> > This patchset adds board support for Avenger96, a 96Boards Consumer
> > Edition board from Arrow Electronics. This board is based on the
> > STM32MP1 MPU and the board support is added under st boards since
> > there are no significance changes required to boot u-boot on this
> > board other than the dts.
> > 
> > More information about this board can be found in 96Boards website:
> > https://www.96boards.org/product/avenger96/
> > 
> > PS: I only managed to boot u-boot as SSBL with TF-A as FSBL. U-boot
> > SPL way of booting is not working.
> 
> What are the symptoms ?
> 

It was my bad. Just found that I missed few `u-boot,dm-pre-reloc` properties
in DTS!

Will send the next version of the patchset incorporating those changes.

Thanks,
Mani

> Patrice
> 
> > 
> > Thanks,
> > Mani
> > 
> > Manivannan Sadhasivam (3):
> >   arm: dts: stm32mp157: Add missing pinctrl definitions
> >   board: stm32mp1: Add Avenger96 board support
> >   arm: mach-stm32mp: Add newline to the MAC error message
> > 
> >  arch/arm/dts/Makefile                         |   1 +
> >  arch/arm/dts/stm32mp157-pinctrl.dtsi          |  63 +++
> >  .../arm/dts/stm32mp157a-avenger96-u-boot.dtsi | 177 +++++++++
> >  arch/arm/dts/stm32mp157a-avenger96.dts        | 362 ++++++++++++++++++
> >  arch/arm/mach-stm32mp/cpu.c                   |   2 +-
> >  board/st/stm32mp1/README                      |  23 ++
> >  6 files changed, 627 insertions(+), 1 deletion(-)
> >  create mode 100644 arch/arm/dts/stm32mp157a-avenger96-u-boot.dtsi
> >  create mode 100644 arch/arm/dts/stm32mp157a-avenger96.dts
> >