[U-Boot] [v4 PATCH] RISCV: image: Add booti support

[Heinrich Schuchardt]

On 5/6/19 10:39 PM, Karsten Merker wrote:
> On Mon, May 06, 2019 at 10:06:39PM +0200, Heinrich Schuchardt wrote:
>> On 5/6/19 8:11 PM, Atish Patra wrote:
>>> This patch adds booti support for RISC-V Linux kernel. The existing
>>> bootm method will also continue to work as it is.
> [...]
>>> +	"boot arm64/riscv Linux Image image from memory", booti_help_text
>>
>> %s/Image image/image/
>>
>> "arm64/riscv" is distracting. If I am on RISC-V I cannot boot an ARM64
>> image here. Remove the reference to the architecture, please.
>
> Hello,
>
> I'm not sure about the last point - ISTR (please correct me if my
> memory betrays me here) that an arm64 U-Boot can in principle be
> used to boot either an arm64 or an armv7 kernel, but the commands
> are different in those cases (booti for an arm64 "Image" format
> kernel and bootz for an armv7 "zImage" format kernel), so having
> the information which kernel format is supported by the
> respective commands appears useful to me.  If the arm64 kernel
> image format would have a distinctive name (like "zImage" on
> armv7 or "bzImage" on x86) that would be less problematic, but
> with the confusion potential of "boot a Linux Image" (as in the
> arm64/riscv-specific "Image" format) vs "boot a Linux image" (as
> in generally some form of kernel image), I think explicitly
> mentioning the supported architectures makes sense.

In this case you have to ensure that only the *supported* architectures
are mentioned. RISC-V is not supported on ARM64.

Best regards

Heinrich