[U-Boot] [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag

[Peng Fan]

> Subject: Re: [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag
> 
> On Tue, 7 May 2019 13:29:41 +0000
> Peng Fan <peng.fan at nxp.com> wrote:
> 
> > > Subject: Re: [i.MX8MM+CCF 12/41] clk: fixed_rate: add pre reloc flag
> > >
> > > On Tue, 30 Apr 2019 10:18:12 +0000
> > > Peng Fan <peng.fan at nxp.com> wrote:
> > >
> > > > Add pre reloc flag to use this driver before relocation
> > > >
> > > > Signed-off-by: Peng Fan <peng.fan at nxp.com>
> > > > ---
> > > >  drivers/clk/clk_fixed_rate.c | 1 +
> > > >  1 file changed, 1 insertion(+)
> > > >
> > > > diff --git a/drivers/clk/clk_fixed_rate.c
> > > > b/drivers/clk/clk_fixed_rate.c index 069e643fbc..debada1463 100644
> > > > --- a/drivers/clk/clk_fixed_rate.c
> > > > +++ b/drivers/clk/clk_fixed_rate.c
> > > > @@ -45,4 +45,5 @@ U_BOOT_DRIVER(clk_fixed_rate) = {
> > > >  	.ofdata_to_platdata = clk_fixed_rate_ofdata_to_platdata,
> > > >  	.platdata_auto_alloc_size = sizeof(struct clk_fixed_rate), .ops
> > > > = &clk_fixed_rate_ops,
> > > > +	.flags = DM_FLAG_PRE_RELOC,
> > > >  };
> > >
> > > This probably shall be done with proper dts file (from TPC70 - imx6q
> > > conversion code):
> >
> > My understanding is DM_FLAG_PRE_RELOC will let the driver could be
> > used before relocation.
> 
> I think that there is OR -> DM_FLAG_PRE_RELOC OR DTS attribute
> (u-boot,dm-spl {pre-reloc}) to use device in early SPL.
> 
> Please look into drivers/core/lists.c Line 175:
> 
> if (pre_reloc_only) {
> if (!dm_ofnode_pre_reloc(node)·&&
> 	!(entry->flags & DM_FLAG_PRE_RELOC))
> 	return 0;
> }

ok, this is new code from Bin.
According this code, only need dts change is enough, no need this driver flag.
I'll drop this patch.

Thanks,
Peng.


> 
> We do not bind device only if there is NO DM_FLAG_PRE_RELOC set AND the
> u-boot,dm-* property is not set in corresponding DTS node.
> 
> > The dts u-boot,dm-spl or u-boot,dm-pre-reloc is just to mark the
> > device could be used at the corresponding stage.
> > Only modify dts will not make it work without the DM_FLAG_PRE_RELOC,
> > Right?
> >
> > Thanks,
> > Peng.
> >
> > >
> > > +#include "imx6qdl-u-boot.dtsi"
> > > +
> > > +/ {
> > > +	clocks {
> > > +		u-boot,dm-spl;
> > > +		osc {
> > > +			u-boot,dm-spl;
> > > +		};
> > > +	};
> > > +};
> > > +
> > > +&clks {
> > > +	u-boot,dm-pre-reloc;
> > > +};
> > >
> > >
> > >
> > > Best regards,
> > >
> > > Lukasz Majewski
> > >
> > > --
> > >
> > > DENX Software Engineering GmbH,      Managing Director: Wolfgang
> > > Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell,
> > > Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> > > lukma at denx.de
> 
> 
> 
> 
> Best regards,
> 
> Lukasz Majewski
> 
> --
> 
> DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email:
> lukma at denx.de